Epson BrightLink 475Wi System manual

Other manuals for BrightLink 475Wi

17

This manual suits for next models

2

Table of contents

Other Epson Projector manuals

Epson

Epson EX71 User manual

Epson

Epson PowerLite Home 20 Manual

Epson

Epson EasyMP EMP-1715 User manual

Epson

Epson PowerLite 703C User manual

Epson

Epson EB-W12 User manual

Epson

Epson PowerLite 420 Reference guide

Epson

Epson EB-W70 User manual

Epson

Epson Home Cinema 2350 User manual

Epson

Epson PowerLite Home Cinema 700 Reference guide

Epson

Epson PowerLite 450W User manual

Epson

Epson PowerLite 500c User manual

Epson

Epson EB-925 User manual

Epson

Epson CO-W01 User manual

Epson

Epson PowerLite 1945W Specification sheet

Epson

Epson 1810p - PowerLite XGA LCD Projector Specification sheet

Epson

Epson EX5200 User manual

Epson

Epson dreamio EMP-TW500 User manual

Epson

Epson 1705C - PowerLite XGA LCD Projector Instruction and safety manual

Epson

Epson EX6210 Installation instructions

Epson

Epson EB-PU1006W/EB User manual

Epson

Epson PowerLite 825 User manual

Epson

Epson PowerLite Pro Cinema 9100 User manual

Epson

Epson EB-S8 User manual

Epson

Epson PowerLite Home Cinema 3100 User manual

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual

Asus

Asus ZenBeam Latte user manual

BOXLIGHT

BOXLIGHT CP-322i/CP-634i user manual

JVC

JVC 1108TTH-AO-AO instructions

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

1

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to

the side in case the lamp is broken.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

4. Slide off the lamp cover.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

2

5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.

6. Lift up the lamp handle and gently pull the lamp out of the projector.

Note: The lamp(s) in this product contain mercury. Please consult your state and local

regulations regarding disposal or recycling. Do not put in the trash.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

3

7. Gently insert the new lamp into the projector along the guide rail. If it does not fit easily, make sure it

is facing the right way. Press the handle down.

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.

8. Tighten the screws to secure the lamp.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

4

9. Replace the lamp cover and tighten the screw to secure it.

Note: Be sure the lamp cover is securely installed or the lamp will not come on.

Reset the lamp timer to zero to keep track of the new lamp’s usage.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

5

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement

message and to keep track of lamp usage correctly.

Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage

information.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Reset menu and press Enter.

4. Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours.

5. Select Yes and press Enter.

6. Press Menu or Esc to exit the menus.