Epson OT-TB34 User manual

The OT-TB34 is an exclusive tear bar for the TM-C3400 to cut wrist band rolls from

General Data Company, Inc. (GD wristbands) manually at the perforation.

This guide explains how to install the tear bar in the TM-C3400.

1. Unlock the paper ejection guide with a

fine-tipped object.

2. Slide the paper ejection guide to as

narrow a position as possible.

3. Pull the release lever to open the roll

paper cover.

4. Insert two hooks of the tear bar into the

groove on the far side of the paper

ejection table.

5. Insert the other two hooks into the

groove on the near side.

6. Make sure that the tear bar is fully

inserted. If there is a gap between it and

the paper ejection table, press the bar

down to set it securely.

412390900

© 2012 Seiko Epson Corporation. All rights reserved.

Printed in Japan

Installation Guide

Installing the OT-TB34

Follow the steps below to install the tear bar on

the paper ejection table.

Paper ejection table

no gap

no gap

7. Slide the paper ejection guide to as wide a position as possible, and lock it.

Setting the Printer Driver

The following driver setting is required to cut GD wristbands at the perforation with the

tear bar, instead of cutting with the autocutter.

1. Select [No Auto Cut] and [Feed To Peel Off Position] in [Settings For Handling Media

After Print] in the [General] tab of the printer driver.

2. Disable the Cut button in [Panel Button Settings] in the [Maintenance And Utilities]

tab.

3. Click [OK] to complete the setting.

Installing GD Wristbands

1. Load the wrist band roll completely inside the printer with the printable side up

(black marks down).

2. Pass the wrist band through the tear bar.

3. Close the roll paper cover with care to keep the wrist band through the tear bar.

4. The wrist band is fed automatically when the roll paper cover is closed or the printer

is turned on.

For initial setting of the printer or details on making paper changes, see "Installing Paper"

in the TM-C3400 User's Manual.

Note:

Pulling the wrist band horizontally when cutting it may misalign it from its correct printing

position. Be sure to cut the wrist band while pulling it upward.

Cautions

Depending on the area, the interface cable may be included with the product. If so, use that cable.

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic

interference that occurs from the use of any interface cables other than those designated as Epson approved

products.

EPSON is a registered trademark of Seiko Epson Corporation in Japan and other countries/regions.

General Notice: Other product and company names used herein are for identification purposes only and

may be trademarks of their respective companies.

Table of contents

Other Epson Label Maker manuals

Epson

Epson TM-T88 ReStick Quick setup guide

Epson

Epson LabelWorks LW-900P User manual

Epson

Epson LabelWorks Pro100 User manual

Epson

Epson CW-C4000e User manual

Epson

Epson TM-C3400BK User manual

Epson

Epson LABELWORKS PX User manual

Epson

Epson TM-T88IV ReStick User manual

Epson

Epson TM-C3400-LT Use and care manual

Epson

Epson TM-C3500 Series Instruction Manual

Epson

Epson LabelWorks LW-400 User manual

Epson

Epson TM-L100 User manual

Epson

Epson ProofPlus TM-H6000III Use and care manual

Epson

Epson LabelWorks Printable Ribbon Kit User manual

Epson

Epson C31CJ52121 Use and care manual

Epson

Epson TM P60II User manual

Epson

Epson TM-H6000II User manual

Epson

Epson LABELWORKS LW-1000P User manual

Epson

Epson TM-U590 Series User manual

Epson

Epson ColorWorks C6030A Instruction Manual

Epson

Epson LW-K400 User manual

Epson

Epson Labelworks LW-Z900 User manual

Epson

Epson LabelWorks LW-700 User manual

Epson

Epson TM-C7500 Series Use and care manual

Epson

Epson LABELWORKS LW-Z710 User manual

Popular Label Maker manuals by other brands

Brother

Brother P-Touch 2420PC Quick reference guide

newell

newell Dymo LabelManager 210D user guide

Brother

Brother TD-4000 Gu

U-Line

U-Line BROTHER H-8754 manual

Tharo Systems

Tharo Systems H-435+ user manual

Brother

Brother E300 user guide

Godex

Godex RT700 SERIES Service manual

ID Technology

ID Technology 252 Operator / technical manual

Labelmate

Labelmate MC-11 user manual

CAB

CAB XD4M/300 Service manual

Avery Dennison

Avery Dennison Pathfinder 6057 System administrator guide

Brother

Brother P-touch PT-9700PC user guide

TSC

TSC PEX1000 Series user manual

Adkins

Adkins Label Master user guide

Primera

Primera 510212 user manual

Brady

Brady BradyPrinter S3100 quick start guide

DuraLabel

DuraLabel LabPRO user guide

Novexx Solutions

Novexx Solutions XLP 604 user manual