Page 3
EPS Stromversorgung GmbH
Alter Postweg 101 • 86159 Augsburg
Germany
Fon: +49 821 / 570451-0
Fax: +49 821 / 570451-25
www.eps-germany.de
info@eps-germany.de
PSI 9000 T Series
TABLE OF CONTENTS
1GENERAL
1.1 About this document......................................5
1.1.1 Retention and use..........................................5
1.1.2 Copyright........................................................5
1.1.3 Validity ............................................................5
1.1.4 Symbols and warnings ..................................5
1.2 Warranty.........................................................5
1.3 Limitation of liability ........................................5
1.4 Disposal of equipment ...................................6
1.5 Product key ....................................................6
1.6 Intended usage ..............................................6
1.7 Safety .............................................................7
1.7.1 Safety notices.................................................7
1.7.2 Responsibility of the user...............................8
1.7.3 Responsibility of the operator .......................8
1.7.4 User requirements .........................................8
1.7.5 Alarm signals..................................................9
1.8 Technical Data ...............................................9
1.8.1 Approved operating conditions......................9
1.8.2 General technical data...................................9
1.8.3 Specic technical data .................................10
1.8.4 Views............................................................20
1.8.5 Control elements..........................................23
1.9 Construction and function............................24
1.9.1 General description......................................24
1.9.2 Block diagram ..............................................24
1.9.3 Scope of delivery .........................................25
1.9.4 Optional accessories ...................................25
1.9.5 The control panel (HMI)...............................26
1.9.6 USB port (back side)....................................28
1.9.7 “Sense” connector (remote sensing)...........28
1.9.8 Ethernet port ................................................29
1.9.9 Analog interface ...........................................29
2INSTALLATION &
COMMISSIONING
2.1 Storage.........................................................30
2.1.1 Packaging ....................................................30
2.1.2 Storage.........................................................30
2.2 Unpacking and visual check........................30
2.3 Installation ....................................................30
2.3.1 Safety procedures before installation and
use................................................................30
2.3.2 Preparation...................................................30
2.3.3 Installing the device .....................................30
2.3.4 Connection to DC loads...............................32
2.3.5 Grounding of the DC output ........................32
2.3.6 Connection of remote sensing ....................33
2.3.7 Connecting the analog interface .................33
2.3.8 Connecting the USB port (rear side)...........33
2.3.9 Initial commission.........................................34
2.3.10 Commission after a rmware update or a
long period of non-use.................................34
3OPERATION & APPLICATION
3.1 Personal safety ............................................35
3.2 Operating modes .........................................35
3.2.1 Voltage regulation / Constant voltage .........35
3.2.2 Current regulation / constant current / current
limiting ..........................................................36
3.2.3 Power regulation / constant power / power
limiting ..........................................................36
3.2.4 Internal resistance regulation ......................36
3.3 Alarm conditions ..........................................37
3.3.1 Power Fail ...................................................37
3.3.2 Overtemperature..........................................37
3.3.3 Overvoltage protection.................................37
3.3.4 Overcurrent protection.................................37
3.3.5 Overpower protection ..................................37
3.4 Manual operation .........................................38
3.4.1 Switching on the device...............................38
3.4.2 Switching o the device...............................38
3.4.3 Conguration via MENU..............................38
3.4.4 Adjustment limits (Limits).............................46
3.4.5 Changing the operating mode.....................46
3.4.6 Manual adjustment of set values.................47
3.4.7 Switching the main screen view ..................48
3.4.8 Switching the DC output on or o ...............48
3.4.9 Recording to USB stick (logging) ................49
3.5 Remote control.............................................50
3.5.1 General.........................................................50
3.5.2 Control locations ..........................................50
3.5.3 Remote control via a digital interface ..........50
3.5.4 Remote control via the analog interface
(AI)................................................................51
3.6 Alarms and monitoring.................................55
3.6.1 Denition of terms ........................................55
3.6.2 Device alarm and event handling................55
3.7 Control panel (HMI) lock..............................57
3.8 Limits lock.....................................................58
3.9 Loading and saving a user prole ...............58
3.10 The function generator.................................60
3.10.1 Introduction...................................................60
3.10.2 General.........................................................60
3.10.3 Method of operation.....................................61
3.10.4 Manual operation .........................................61
3.10.5 Sine wave function.......................................62
3.10.6 Triangular function .......................................63
3.10.7 Rectangular function....................................63
3.10.8 Trapezoidal function.....................................64
3.10.9 Ramp Function.............................................64
3.10.10 Arbitrary function..........................................65
3.10.11 Remote control of the function generator....69
3.11 Other applications........................................70
3.11.1 Series connection ........................................70
3.11.2 Parallel operation .........................................70
3.11.3 Operation as battery charger.......................70
