Eonon E1015 User manual

E1015

User Manual

Pleare read this manual before using and

save this manual for future reference.

WELCOME

Thank you for enjoying our series of digital car A/V product.

To properly use this product, please go through this instruction manual for installation

and operation, put it in a safe place for future use!

WARNING

1.Please keep the disk slot clean, wipe it off when there is some dirty on it, please wipe

off the dirty on disk before slot it into the unit. If dirty on disk go into the slot with disk,

that will lead unit to slow slot or cannot read disk. In fact ,that is not quality problem.

Please ask professional to clean the laser. That will bring you some inconvenience.

2.Playing disk for long time or high volume level will influence the lift of unit. To protect

this unit, please work with radio, middle level volume level during long time use.

3.This unit is set up by precision parts. Please do not open the unit or adjust any parts

inside unit by yourself.

4.Please do not touch LCD display by hard object to protect in form scratch.

5.To avoid accident caused by scatterbrain, driver should not operate this unit or watch

its screen. If needed, please park the car in a safe play before operation.

6.This unit is for 12V and negative ground system car, please do not connect it directly in

24V truck or bus.

NOTE: We keep improving this product, if there is any change, forgive us do not

announce.

MODE

Sound,image 12CM

12CM

DVD

VCD

MP3

Note: 1. This unit is compatible with MP4/DVD/VCD1.0/2.0/3.0 version,

DVD, CD-R, CD-RW, MP3, WMA, JPEG.

2. When play DVD, VCD, MP3, CD disc, display will auto identify

the disk and show corresponding word. When appear on

display, that means no that function, please choose other function.

Detailed operation please refer to other related instructions.

NOTE

● This unit can play the following disc:

ICON CONTENT DISC SIZE

Sound,image

Sound only

●It may lead to accident if you are going to change unit.

●Playing disk during car run on bumpy road will damage laser. Playing substandard disk

or damage disk will damage laser.

●The environment of inside car is not good, too much dirty, please clean the laser by

laser cleanser timely.

●Do not work under terribly hot or cold environment, please ensure the temperature in

car is in -20℃～60℃.

●During operation, if appear on LCD, that means unit do not support that function,

operation is invalid.

●When unit is showing some abnormal, please refer to TROUBLE SHOOTING in this

instruction manual, If you cannot find any solution, please press RESET to resume to

initial status.

SPECIFICATIONS:

Power supply..........................................................................................................DC 12V

Power range...............................................................................................10.8-16.0V DC

Max operate current.....................................................................................................10A

Ground system.........................................................................................Negative ground

FM tuner

Frequency range...........................................................................................87.5-108MHz

Signal/Noisse ratio......................................................................................................55dB

Stereo separation............................................................................................(1KHz)30dB

Search station volt.............................................................................................20-30dBuv

Distortion rate.............................................................................................................1.5%

AM tuner

Frequency range..........................................................................................522-1620KHz

Limit noise sensitivity..................................................................................................32dB

DVD PLAYER

Signal/Noise ratio.......................................................................................................70dB

Frequency response......................................................................................20Hz-20KHz

FEATURES

DVD PLAYER

1. International advanced MPEG-4 DECODE TECHNOLOGY

2. COMPATIBLE WITH MP4 (AVI/DIVX/5.X), DVD(DVD-R/DVD-RW),

VCD, SVCD, CD-RW, WMA, MP3 JPG

3. Multiple subtitles, angles, languages supporting, Child lock function

4. 4 CHANNEL AUDIO OUTPUT MODE

5. PAUSE, PLAY, UP/DOWN, STOP, ZOOM, PBC FUNCTION

6. FM/AM RADIO TUNER

30 RADIO STATION (18FM, 12AM)

BLUETOOTH FUNCTION

1. Bluetooth wireless transfers

2. Support displaying bluetooth paring and connection status, call status and caller's ID

3. Robust performance, fast connection, accurate and sensible search of devices in range

4. Support A2DP, AVRCP, HS/HF for handing calls and playing music.

LCD DISPLAY

1. 7inch, 16:9 TFT LCD display

2. Touch screen

3. Auto adotoried panel

4. Angle of turn adjustable

WIRING DIAGRAM

This player is equipped with ISO standard connector, please follow below instruction:

● Red - ACC ON (+12V) ● Grey/Grey black - Right front speaker anode/cathode

● Yellow - Battery anode (+12V) ● White/White black - Left front speaker anode/cathode

● Black - Ground line ● Purple/Purple black - Right rear speaker anode/cathode

● Blue - Power Antenna Control line ● Green/Green black - Left speaker anode/cathode

● Orange - Backsight camera power

control line

● Pink - Braking line

BASIC OPERATION

1.SOURCE ON/OFF

Press SOURCE button on panel or PWR button on remote control shortly to power on,

Press SOURCE button on panel or PWR button on remote control longer to power off.

2.PLAYING SOURCE CHOOSE

Press SOURCE button on remote control, unit will switch source of playing as

following sequence:

RADIO → DVD → AUX → TV→Bluetooth

1)During switch mode, TFT LCD display will show the name of mode in English;

2)You can't switch to CDC and GPS mode by SOURCE button, content as follows:

RADIO

DVD

AUX

Bluetooth

3.MUTE CONTROL

Press MUTE button on panel or MUTE button on remote control shortly to turn off

sound output, press again to back to sound output.

4.VOLUME ADJUSTMENT

1)Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch

button on display to adjust volume level.

2)The tone of volume is 0-39.

TONE MODE ADJUSTMENT (SEL)

Press SEL button on remote control shortly or touch area or SEL button on panel to

choose your desired tone mode:

VOL→BAL→TRE→L/R

F/R

NOTE:

1)At DVD playing state, MBP & User will be automatically activated.

2)After 5 seconds you choose desired mode, do not adjust volume button, the mode

will auto to back to status before adjustment.

TROUBLE SHOOTING

PROBLEM CAUSE SOLUTION

Can not power on

Check whether power fuse

melt or not

Some factor cause MPU wrong

operation

Change fuse same as the old one

Press RESET button on the panel by pen

point, then, power on

After ignition

switch off, setting

information all lose

Wrong connection between

ignition line ACC and power

line anode pole BAIT

Reconnect line

Remote control no

function No enough power supply

from battery Change battery of remote control

Poor performance

of radio station

Improper set of length of

antenna, poor connection of

antenna grounding

Check whether antenna is connected or not,

or poor connection

Can not load disc There is a disc in deck Check grounding is connected or not

Can not play disc

Disc is scratched

Put wrong side of disc into unit

Lens has dirty

Change new disc

Clean lens by lens clean disc

Slot in the disk with sign side up

Can not switch

language/subtitle There is only one language/

subtitle in disc If disk is not with multi-language/subtitle, it

cannot switch language/subtitle

No image Video line between unit and

TV is not properly connected Reconnect lines

5.RESET

1) If unit is dad abnormal status appear because of wrong operation, press RES

button on panel by penpoint, unit will resume work.

2) After reset, all setting will resume to setting before leaving factory.

PANEL ARRANGEMENT

8.AUX IN JACK

9.USB PORT

10.REL BUTTON

11.Reception window on remote

control selection button

12.SD port

1.SRC BUTTON

2.MUTE BUTTON

3.OPEN BUTTON

4.VOL- BUTTON

5.VOL+ BUTTON

6.UP BUTTON

7.DN BUTTON

OTHER PLAY MODE

AUX IN:

AUX IN OPERATION

1) Press “Source” button on remote control or touch “AUX” on the touch screen, switch

AUX mode.

2) Make video input plug connect to AUX video input outlet, audio input connect to

AUX audio input outlet.

3)This unit only supply 1pcs video input & 1 pair audio input.

CCD (Car backsight function)

1) If there is a car back

camera on your car, please connect car back control line “BACK” to your car camera

control terminal, and connect video input line to the video output terminal of your car

camera.

2) When car is back, the unit will auto switch to CCD mode, and there is a “ ”

appeared on the screen.

3) You can set CCD image according to your car's own position in general setting mode.

2.Panel button control instruction

1.SRC(Power button/audio mode switching button)

Press this button to power on. Press it shorty to switch audio source mode. At AUX IN

mode,press it longer to power off.

2.MUTE/TFT ON/OFF BUTTON

Press this button shortly to turn off volume output,press again to resume former volume

level.

Press this button longer to turn on/off TFT LCD display.

3.OPEN BUTTON

In other audio source,press this button to slide up or down display.At that time,load disk,

unit will play it and close the display.If there is a disk inside,unit will auto eject disk.

4.VOL- BUTTON

Press this button to reduce the volume.

5.VOL+ BUTTON

Press this button to increase the volume.

6.UP BUTTON

Short press this button to make the monitor glide up steply.

Long press this button to make the monitor glide up to the toppest position.

7.DN BUTTON

Short press this button to make the monitor glide down steply.

Long press this button to make the monitor glide down to the lowest position.

8.AUX IN audio input jack)

External connected audio input.

9.MINI USB PORT

The audio and wiedo documents can be red by mini USB port which is with standard

high speed USB port.

10.Release button

Press this button can take off the control panel.

11.REMOTE CONTROL RECEIVER

It can receive infrared massage of remote control.

12.SD slot

Using hight speed 2.0 port which can read many big capacity MP3.MP4 format file.

Operations and Settings for the Bluetooth Function

1.Features of the Bluetooth function

1)You can use the function buttons on the unit to receive a call or dial a phone number.

2)You can directly use the hand-free microphone to talk on the phone.

3)You can use the build-in volume control switch to adjust the volume at will.

4)You can switch between the Bluetooth hand-free mode and the cell phone mode.

5)You can use your voice to dial a new number (valid only for cell phones with voice

dialing function).

6)With the Bluetooth function, you can use the Bluetooth microphone in the car to talk

with your folks and friends without having to hold your cell phone, so that your hands

are dedicated for driving, which is safer and law-observing. In the mean time, magnetic

radiation from the cell phone is avoided.

2.Bluetooth match conditions

You can shortly touch the Bluetooth function key  under the main menu to directly

access the Blueetooth interface.

With a cell phone that supports the function of Blueetooth wireless connection, you can

establish a connection between your cell phone and the automobile-loaded unit under the

Bluetooth mode to achieve date exchange and synchronization.

3.Matching and connections between the cell phone and the Bluetooth of the unit

Set your cell phone to the Bluetooth mode, and use the cell phone to search equipments.

After the Bluetooth equipment of the unit is searched, the cell phone will ask you for the

Bluetooth password. Press the unit matching setup button , and enter the Bluetooth

password (0000) and confirm it, and then the cell phone will ask you whether you

authorize

the connection with this equipment or not. Please select “YES”, and the cell phone will be

automatically connected with the said Bluetooth equipment within 30 seconds. “OK LINK”

will be displayed on the Bluetooth interface to show that a connection between the cell

phone and the Bluetooth device has been successfully established. Under and mode

(radio, TV, DVD, etc.), if there is an incoming call to your cell phone which has been

stably

connected to the Bluetooth device of the unit, the unit will switch from other mode to the

Bluetooth mode after the cell phone rings for about 10 seconds. Current mode will be

automatically restored after hang-up.

Slot indicator light

RESET Light

RESET button

Disk slot

Hand-free button: After a phone number is keyed in, press this button to call

the user of this phone number. When there is an incoming call. Press this button

to connect this call.

Hang-up button: When there is an incoming call, press this button to hang up

or refuse to connect it.

Delete button: When a wrong digit is keyed in, press this button to delete the

wrong digit.

Number keys: You can use these number keys to enter a phone number.

Phone number display: The phone number that you have just entered is Displayed

here.

Contact book mode switching

You can touch this button under the Bluetooth mode to select the next mode.

Touch this function key to search the dialed numbers. Each time

This key is touched, the cursor will move to the next dialed number.

Touch this function key to search the received numbers. Each time

This key is touched, the cursor will move to the next received number.

Touch this function key to search the missed numbers. Each time

This key is touched, the cursor will move to the next missed number.

MAIN MENU TOUCH OPERATION

DVD USB/SD

BLUETOOTH

RADIO TV

GPS

IPOD CCD

AUX INPUT

PATTERN SET

1.Bluetooth hand-free/cell phone switching

2.Voice dialing function

3.Contact book mode switching

4.Matching function during Bluetooth connection

5.Hand-free key

6.Hang-up key

7.Delete key

8.Phone number display

9.Number keys

10.Return to the main screen

BLUETOOTH TOUCH OPERATION

Functions and Descriptions

Bluetooth hand-free/cell phone switching

If you touch this switching button at the upper-left corner of the screen under the

Bluetooth hand-free mode, the speaker will beep and the hand-free mode will be

switched to the cell-phone mode.

Voice dialing function

If you touch the “Voice dial” button at the lower-left corner of the screen under the

Bluetooth hand-free mode and the cell-phone mode, you will hear the keying tone, and

you can go ahead with the voice dialing function according to the cell-phone instructions.

Eg, if you wish to call someone, you can pronounce his/her name stored in the cell

phone, then ,the name of the person to be called will be played by the speaker, and the

telephone number of this person will be displayed on the screen and automatically dialed.

To cancel voice dialing

If you wish to disable the voice dialing function in the voice dialing mode, you can press

the “Voice dialing” key again, and this function will be disabled after you hearing the

keying tone.

Table of contents

Eonon E1015 User manual

Popular Car Video System manuals by other brands