enz P360 User manual
Operating Manual
English USA
September 22
│ Version
1.
6
P360
(07.2500A/B)
Operating Manual
September 2022 Version 1.6 ©2022 enz® technik ag Page 1 of 3
Content
Preface ................................................................ 4
1 Safety ............................................................. 5
1.1
Noncompliance with the safet information and its
consequences. ..................................................................... 5
1.2
Target group ............................................................... 5
1.3
User requirements ...................................................... 5
1.4
Explanation of general safet instructions ................. 5
1.5
Information provided in these operating instructions6
1.6
Explanation of specific safet instructions ................. 6
1.7
Intended use ............................................................... 6
1.8
Safet warnings for modifications .............................. 7
1.9
Protective equipment for working in manholes,
excavations, and channels .................................................. 7
1.10
General safet instructions ................................... - 10 -
2 Legal ............................................................. 12
2.1
Cop right .................................................................. 12
2.2
Exclusion of liabilit .................................................. 12
2.3
Warrant conditions ................................................. 12
3 Propeller nozzle P360 (0 .2500A/B) .............. 13
3.1
Application area (07.2500A/B) .................................. 13
3.2
Technical data ........................................................... 13
3.3
Propeller nozzle P360 ............................................... 14
3.4
Part names ................................................................ 15
4 Commissioning ............................................. 16
4.1
Fitting options based on enz® JetCalc ....................... 16
4.2
Example fitting options ............................................. 17
4.3
Working without thrust ............................................ 18
4.4
Drive variants ............................................................ 18
5 Installation ................................................... 19
5.1
Setting up the work area ........................................... 19
5.2
Putting the P360 into the channel ............................ 20
5.3
Installation in the channel......................................... 21
5.4
Installation in circular, arch, and rectangular profiles21
5.5
Installation in an ovoid profile .................................. 22
5.6
Folding the wheel carriers outward .......................... 22
5.7
Winding out the skids ............................................... 23
5.8
Extending the propeller ............................................ 23
5.9
Mounting the thrust part and the connecting hose . 24
5.10
Securing the hose ...................................................... 25
5.11
Connecting the channel rinsing hose ........................ 25
Operating Manual
September 2022 Version 1.6 ©2022 enz® technik ag Page 2 of 3
6 Operation ..................................................... 26
6.1
Increasing pressure ................................................... 26
6.2
Cleaning pipes with minor damage .......................... 26
6.3
Troubleshooting........................................................ 27
After operation ............................................. 28
7.1
Removing the nozzle from the channel .................... 28
7.2
Completing the work process ................................... 28
7.3
Transport .................................................................. 28
8 Maintenance ................................................. 29
8.1
Maintenance after each use ..................................... 29
8.2
Nozzle inserts ............................................................ 29
8.3
Lubricating the spindle ............................................. 30
8.4
Replacing the connecting hose ................................. 30
8.5
Additional work ........................................................ 30
8.6
Care ........................................................................... 30
8.7
Disposal, environmental protection ......................... 30
9 Accessories and spare parts ........................... 31
9.1
Accessories ............................................................... 31
9.2
Propeller nozzle P360 ............................................... 32
9.3
Propeller 007.25004 ................................................. 33
9.4
Skid 007.25005 .......................................................... 34
9.5
Thrust 007.25001 & thrust fastener 007.25002 ....... 35
Operating Manual
September 2022 Version 1.6 ©2022 enz® technik ag Page 4 of 3
Preface
Dear valued customer,
Thank ou for the confidence and trust ou've placed in us b
purchasing one of our products.
We alwa s appreciate suggestions for improvement and con-
structive comments. Your feedback will help us improve the de-
sign of our product and the associated documentation.
If ou have an questions or suggestions, please contact our
Customer Service Department.
enz® technik ag Phone +41 41 676 77 66
Schwerzbachstrasse 10 Fax +41 41 676 77 67
www.enz.co
Person responsible for documentation:
Marc Renggli (Tech. Support / QM Manager)
We reserve the right to modif and further enhance our prod-
ucts without prior notice as a result of technological advances.
Misprints reserved.
Purpose of the document
The purpose of this manual is to instruct ou on how to use our
product correctl , effectivel , safel , and for its intended pur-
pose. The user will be informed about risks, reasonabl fore-
seeable misuse, and residual risks.
Important!
Read carefull before use.
Keep for later reference.
Please read this operating manual thoroughl before using the
cleaning tool. Make sure that all emplo ees who work with
the product know how to use it correctl .
The operating manual must be available to all operating per-
sonnel at all times. It must be kept in an easil accessible place.
If the manual is misplaced or destro ed, a new cop can be
requested from our nearest dealer or from the manufacturer
directl .
Operating Manual
Safety
September 2022 Version 1.6 ©2022 enz® technik ag Page 5 of 3
1 Safety
1.1 Noncompliance with the safety information and
its consequences.
Disregarding these safet instructions ma lead to accidents
and severe personal injuries, material damage as well as
damage to the environment.
The manufacturer cannot be held responsible for an damage
resulting from noncompliance with these instructions.
1.2 Target group
This manual is intended for all persons who will be involved in
the assembl , start-up, and operation of the pipe cleaning tool.
1.3 User requirements
All persons involved with assembl , start-up, and operation of
the tool must
• Be familiar with the field of channel maintenance work
and possess the appropriate technical knowledge.
• Be trained and instructed appropriatel in the use of the
product.
• Have read and understood the operating manual, in par-
ticular the section on “Safety.”
If our personnel do not possess the necessar knowledge, the
must be trained and instructed on it. If necessar , the pipe
cleaning tool manufacturer can provide this instruction and
training.
Onl the maintenance and service activities described in this
manual ma be performed b users who have met the above-
listed requirements. An additional maintenance and service
work ma be performed onl b qualified specialist personnel
from the manufacturer.
1.4 Explanation of general safety instructions
The general safet instructions in this section provide infor-
mation about potential residual risks, which are inherent to the
product and ma occur unexpectedl , despite the proper usage
of the product.
In order to prevent personal injuries, damage to propert and
the environment, all personnel working with this product must
compl with these safet instructions. It is mandator for said
personnel to read and understand the information provided in
this section.
Please refer to the section on "MAINTE-
NANCE."
Operating Manual
Safety
September 2022 Version 1.6 ©2022 enz® technik ag Page 6 of 3
1.5 Information provided in these operating
instructions
DANGER
Noncompliance ma lead to serious injur
or loss of life.
WARNING
Noncompliance ma lead to serious injur
or loss of life and/or long-term disabilit .
CAUTION
Noncompliance ma lead to injur and con-
siderable material damage, financial loss,
or damage to the environment.
Information on the technicall correct and
efficient use of the product.
1.6 Explanation of specific safety instructions
Safet information pertaining to particular situations is high-
lighted in the appropriate section of the operating manual.
1. Intended use
The product is designed to clean the insides of pipes (channel
pipes). The following points must be followed to ensure proper
use of the product.
The cleaning tool ma be used onl in pipes or pipe-
like channels. The profile to be cleaned must be free
of leaks and surrounded b material.
The tool ma be used on the following t pes of pipes:
o PE pipes
o Steel pipes
o Concrete pipes
For use in pipes made of other material, please consult
the manufacturer.
The product ma be operated onl in pipes with
correctl installed and defect-free connections.
Cleaning areas (manholes, pipe branches, etc.) need
to be sufficientl secured during the operation, includ-
ing during construction and cleaning work.
Operating Manual
Safety
September 2022 Version 1.6 ©2022 enz® technik ag Page of 3
During the cleaning operation, no personnel are
allowed inside the pipes or at either end of the pipes.
The maximum pressure indicated on the nozzle ma
not be exceeded.
Wastewater ma not be drained into watercourses
(creeks, rivers etc.).
The product must be inspected to ensure it is in proper
working order before ever start-up.
Defects must be rectified before start-up.
Use the tool onl as intended. (Use onl the correct
wrench for nuts).
Secure the hose lines in such a wa that the cannot
become damaged during operation.
Onl the accessories provided and approved b
enz® technik ag ma be used.
1.8 Safety warnings for modifications
No other changes or modifications to the pipe cleaning tool
ma be performed. Onl parts authorized b the manufac-
turer ma be used. The manufacturer is not liable for damage
resulting from unauthorized changes to the product.
1.9 Protective equipment for working in manholes,
excavations, and channels
The emplo er must provide suitable personal protective
equipment and ensure that it is worn b the emplo ees during
work.
In the following section, the protective equipment prescribed
b Schweizerische Unfallversicherung SUVA (the Swiss Acci-
dent Insurance Organization) will be described.
See also:
Suva
Schweizerische Unfallversicherungsanstalt
Arbeitssicherheit
Postfach, 6002 Lucerne, Switzerland
For information
Phone +41 41 419 51 11
For orders
www.suva.ch/waswo
Fax +41 41 419 59 17
Phone +41 41 419 58 51
Safe entry and working in shafts, excavations, and chan-
nels (in German, French & Italian)
Order n mber: 44062.d
Operating Manual
Safety
September 2022 Version 1.6 ©2022 enz® technik ag Page 8 of 3
Respirators
Suitable working clothing
Self-contained respirator equipment for
spending time in dangerous atmospheres
and for use during rescue operations.
Leak-proof working clothing protects the
skin from becoming soiled and from possi-
ble infections. Visuall conspicuous work
clothing makes the emplo ee more visible
to traffic.
Respirators
Appropriate footwear
Self-rescue respirator equipment (devices
with compressed air tanks or regeneration
devices) for working in channels and for first
aid for injured persons.
Safet footwear should, in particular, have
good grip and be slip-resistant and leak-
proof (e.g. rubber boots).
Rescue harness
Gloves
Rescue harness or protective clothing with a
loop sewn into the neck. During rescue, the
rescue rope will be attached to the neck
loop. Injured persons will be lifted out using
a rescue lifting device with a self-actuating
load brake.
Appropriate gloves will protect ou from
hand injuries and contact with materials
that could impair our health and from un-
treated water.
Operating Manual
Safety
September 2022 Version 1.6 ©2022 enz® technik ag Page 9 of 3
Hardhat
Eye protection
The hardhat will protect our head from
falling objects and from bumping into fixed
components and objects.
Your e es should be protected against grit,
spra ed dangerous substances, etc.
Hearing protection
Lighting independent of the power grid
If there is noise that could damage our
hearing, ou can wear, e.g. earmuffs with
built-in headphones and microphone.
For example, a waterproof flashlight or a
flashlight attached to our hardhat.
This manual suits for next models
2
Table of contents
