Enviro DV42DX User manual

The Cottage

Sherwood’s Home Collection

DV42DX

Slot on

DV42DX

Clip on

Cottage

Figure 1: The Cottage clip sliding into DV42DX slot.

INSTALLATION INSTRUCTIONS:

IMPORTANT: Please be careful when removing the

face from the packaging as you may damage it.

1. The distance between the replace and the face

can be adjusted to compensate for added material

around the replace. Adjust depth if required; refer

to “ADJUSTING DEPTH OF FACE INSTRUCTIONS”.

2. Lift the face upright in front of the replace with the

two clips pointing towards the replace. Slide the

clips into the slots (see Figure 1). The clips should

make a ‘click’ sound when they are in place.

3. The face should be cleaned before the replace is

turned on for the rst time, refer to “CLEANING THE

FACE“.

REMOVAL INSTRUCTIONS:

WARNING: To avoid personal injury do not handle face when hot.

1. Press on the clip from the inside, as shown in the Figure 2. When both clips have been unlocked then pull the

face away from the replace.

2. Place the face where it will not be damaged.

Figure 2: Push on clip to remove Cottage.

Part # Option

50-693 The Cottage Bow Face Painted Charcoal - No Trim

50-548 The Cottage Trim Kit - Gold (2 Inset Pieces, Carriage Bolts, Top & Bottom Trim Pieces)

50-549 The Cottage Trim Kit - Pewter (2 Inset Pieces, Carriage Bolts, Top & Bottom Trim Pieces)

50-550 The Cottage Trim Kit - Antique Copper (2 Inset Pieces, Carriage Bolts, Top & Bottom Trim Pieces)

50-694 The Cottage Trim Kit - Painted Black (2 Inset Pieces, Carriage Bolts, Top & Bottom Trim Pieces)

50-617 The Cottage Steel Template

MANUFACTURED BY:

SHERWOOD INDUSTRIES LTD.

6782 OLDFIELD RD. SAANICHTON, BC, CANADA V8M 2A3

www.enviro.com

October 3, 2007

C-11266

ADJUSTING DEPTH OF FACE INSTRUCTIONS:

Depending on the nishing material surrounding the replace the distance the

face rests away from the replace may differ. The clip can be moved out to

compensate for extra material.

On the face there are four slots on each side (see Figure 3). To increase the

distance the face sits from the replace loosen the T-20 screws in each of the

slots and slide the clip out the desired distance. The clip can be moved out ³/8”

(9.5mm). When tightening the screws, measure their position in all eight slots.

They should all be in the same spot along the slots. The face will sit crooked if

the slots are not equal.

CLEANING THE FACE:

IMPORTANT: Never clean the face when it is hot.

Painted faces should be periodically wiped with a damp cloth.

If a plated face has been purchased, it is important to note that ngerprints and

other marks can leave a permanent stain on plated nishes. To avoid this, give

the face a quick wipe with denatured alcohol on a soft cloth BEFORE lighting

the replace. Do not use other cleaners as they may leave a residue, which can

become permanently etched into the surface.

APPROXIMATE DIMENSIONS OF THE COTTAGE:

● Height at center above top trim is 30” (765mm); ” (3mm) offset along

top trim for bolt heads (30” (768mm) to top of the bolt head)

● Height ush with face edge, above top trim

● Height at edge of top trim is 28” (724mm)

● Distance from edge of top trim overhang to side edge of face is ” (10mm)

● Radius of top trim is 1119/16” (2834mm)

● Width from edge to edge of face is 37” (956mm)

Slot

Slot

Slot

Slot

Figure 3: Slots for depth

adjustment.

Other manuals for DV42DX

2

Table of contents

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual

Miles Industries

Miles Industries Vogue 1300IRN Installation & operating instructions