Enttec Hyperion User manual

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 1

Hyperion

INTELLIGENT GIGABIT SWITCH

Contents

Package Contents....................................................................2

Safety Information ..................................................................2

Physical Dimensions...............................................................3

Specifications...........................................................................4

Hyperion Hardware Interface...............................................4

Application Diagram ...............................................................6

Ethernet Link Pin Out .............................................................6

Redundancy Link .....................................................................7

Initial Setup...............................................................................2

Out of Box (Factory Settings)............................................2

Change Device IP.................................................................2

Default Login Details..........................................................2

How to Access Web Interface?..............................................8

Hyperion Web Interface.........................................................9

Home Page ................................................................................9

Settings Page..........................................................................10

Change Password ..............................................................10

Ports Page................................................................................ 11

Administration........................................................................12

Backup..................................................................................13

Restore.................................................................................13

Restore to factory defaults (web interface) ...............12

Restore to factory defaults (reset switch) ..................13

Firmware Update...............................................................13

Ordering Information............................................................15

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 2

Package Contents

•Hyperion (71025, 71026 0r 71027)

•2m cat5 cable (79102)

•This user manual

Safety Information

•This unit is intended for indoor use only

•Do not expose this device to rain or moisture,

doing this will void the warranty

•Make all the connections before you plug in the

mains power

•Do not remove the cover, there are no user

serviceable components inside

•Never plug this unit in to a dimmer pack

•Ensure proper earth connections

•Always be sure to mount this unit in an area that

will allow proper ventilation. Allow about 6” (20

cm) between this device and a wall

•Power-supply cords should be routed so that

they are not likely to be walked on or pinched

Initial Setup

Out of Box (Factory Settings)

All Hyperion devices come with the following

default settings:

•IP: 192.168.0.10

•Subnet Mask: 255.255.255.0

•Gateway: 0.0.0.0

Change Device IP

To change the IP of the device do as follows:

•Connect Hyperion directly to a computer

using a cat5 cable

NOTE

The computer should have the following network

adapter settings:

•Static IP: 192.168.0.1

•Subnet Mask: 255.0.0.0

•Gateway: 0.0.0.0

•Type in the default IP of 192.168.0.10 into any

browser

•Log into the device as shown in window

below:

Default Login Details

The log in details for the device are as follows:

•Username: admin

•No password required

Once logged in, set the device with the

appropriate network configurations

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 3

Physical Dimensions

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 4

Specifications

Item

Model SKU

71025

71026

71027

Input Voltage

90-264 V AC

Input Frequency

47-63 Hz

Temperature

Storage

-20°C ~ 70 °C

Working

0°C ~ 40 °C

Humidity

Storage

5% ~ 90% non-condensing

Working

10% ~ 90% non-condensing

Connectors

1X powerCON IN

6X Front etherCON connectors

2X Rear etherCON connectors

1X 1000M SFP port

OpticalCON

(Front)

N/A

1X OpticalCON

(Rear)

IP Rating

IP20

Cooling Method

Fan (always on)

Maximum Power

60 W

Power Supply

Protection

Over-current

Auto recovery

Over-temperature

Latch

Short

Auto recovery

Over-voltage

Auto recovery

MAC Address

table limit

8192

Maximum frame

length

9216 B

Cache

32 Mb

Switching

Capacity

52 Gbps

IGMP support

Yes (V1/V2)

IGMP snooping

(multicast)

Yes, enabled by default

Net Weight

2.5 kg / 5.52 lb

Gross Weight

2.8 kg / 6.18 lb

Dimensions

(without ears)

L x W x H

445.82 mm x 180.29 mm x 43.20 mm

17.55 in x 7.10 in x 1.70 in

Dimensions (with

ears)

L x W x H

483 mm x 180.29 mm x 43.20 mm

19.02 in x 7.10 in x 1.70 in

Packaging

Dimensions

533 mm x 247 mm x 111 mm

21.78 in x 9.72 in x 4.37 in

Ethernet

Compliance

IEEE 802.3, IEEE 802.3u, IEEE 802.3x

Flow Control, IEEE 802.3ab Gigabit

Ethernet

Due to continuous improvements and innovations of all

ENTTEC products, specifications and features are

subject to change without notice.

Hyperion Hardware Interface (Front)

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 5

LED Status

Power LED

Status LED

Operation

Green (static)

Amber

Device loading firmware

Green (Static)

Green (Blinking)

Normal operation

Green (Static)

No lit

Rebooting

Hyperion Hardware Interface (Rear)

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 6

Application Diagram

Ethernet Link Pin Out

Colour

White/Orange

Orange

White/Green

Blue

White/Blue

Green

White/Brown

Brown

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 7

Redundancy Link

Redundancy link is the ability of both port 7 and port 8 of Hyperion to be connected to the same networking

device. This ensures that the network connection is maintained in case of failure of one of the two links.

Note:

•Ensure the networking device e.g. router or switch connected using the redundancy links is capable of

such a connection

•Redundancy link should be enabled prior to connecting two switches using port 7 and port 8

•Once the device is set to factory defaults using the button, the redundancy link is disabled

•To enable the redundancy link reload/refresh the device web page

•If redundancy link is listed as disabled on the web interface reload page

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 8

How to Access Web Interface?

1. Open any modern web browser, such as Chrome, Firefox, Safari or Edge

2. To access the web interface type in the assigned IP address of Hyperion e.g: 10.10.0.201

3. You will be prompted to login using the following details:

•User name: admin

•Password:

Please use the password, if any set by you.

By default, password is not required, so should be empty.

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 9

Hyperion Web Interface

The Hyperion web interface has the following sections:

1. Home

2. Settings

3. Ports

4. Administration

Home Page

Home page shows the followings information:

•Device Name – Identify switches in the

network

•System uptime - The time since the device

was switched on

•Number of ports

•Device IP address

•Sub netmask

•Gateway IP

•Mac address

•Redundancy link status

•Software version

•Firmware version

•Boot version

•Hardware version

Hyperion User Manual

51164

For latest version visit:

www.enttec.com

November 17 ID: 3809208 10

Settings Page

The setting pages enables the following:

•System name - Assign a device name

•System location – Location of switch

•System contact – Note network contact

•IP address – IP of device

•NetMask – netmask of device

•Default Gateway

•DNS 1/ DNS 2 – Configure IP of DNS server

to be used

•Security settings – change device password

Change Password

The change password feature is under the Settings

page as shown in screen below:

To change the password:

1. Enter the new password

2. Click Update Security Settings

Table of contents

Other Enttec Switch manuals

Enttec

Enttec Hyperion 71025 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual