5. Built-in Memory and SD Card
This Monitor has been equipped with a built-in memory (about 120 MB) together with a
SD card reader. Maximum 16 GB SD card can be supported.
-7--6-
Screen Seng
• When the Monitor is in monitoring or talking state,
Press Adjust icon to enter screen seng mode.Touch
any item you want,then touch to decrease or
increase the value.Sengs will be performed
immediately. Press icon to exit out the page.
• The monitor can play photos and pictures.
• Photo frame funcon, each photo playing will last 5 seconds, More pictures in the
SD card, longer me for triggering the funcon, 800 pictures is supported in inner
memory. With 2G SD card,more than 30000 pictures can be supported.
• Must use T-views album soware tool to transform the JPG format photos taken by
digital camera to TVS format photos that can be viewed on Monitor.
• The captured pictures will be saved in a folder named by date,note that the pictures
captured every day will be saved in different folders which automacally generated
every day.
• The captured pictures in the built-in memory can be copied to the SD card, and you
should use T-views memo soware tool to convert the pictures to JPG format that
can be seen on the computer. (select the pictures(press Ctrl+A to select all)->>click
the right key of the mouse ->>choose transfer selected to JPG item->>save the
pictures on computer)
• When the built-in memory is full,the oldest picture will be deleted to make room
for new records.
• The built-in memory can be formaed by the Monitor,but SD card cannot,you
should format the SD card on computer.
• Avoid to plug in/out the SD card when the monitor is under operaon.
• Playing will be interrupted by the calling from outdoor staon.
Restore to Default
• The restore to default funcon allows the user to
recover the sengs to factory seng.Note that the
restore to default operaon will not change the me
seng and the data on buit-in memory or SD card.
Enter main menu page,then touch User Setup icon to
enter the seng page,press Restore to default item, the
default sengs will be loaded. press Home icon to
return to home screen page.
• Touch Installer setup icon,a digit keypad and
installaon seng will be shown on screen.
• Input code number by touching the digit
keypad.According to the le instrucons, 8010 and 8011
are used to set the unlock mode(0 and 1). 8021~8029
are used to set the unlock me (1s~9s) .use to cancel
the input,and use to save the seng.Touch icon
to return last page .
Code Number:[----]
[0010]#:Remove all remote control
[0011]#:Add remote control
[8000]#:Set as master unit 0
[8001]#:Set as slaver unit 1
[8002]#:Set as slaver unit 2
[8003]#:Set as slaver unit 3
[8004]#:Set as guard unit
[8005]#:Set as not guard unit
[8010]#:Set lock mode to 0
[8011]#:Set lock mode to 1
[8021]#:Set the lock time of 1s
[8022]#:Set the lock time of 2s
[8023]#:Set the lock time of 3s
[8024]#:Set the lock time of 4s
[8025]#:Set the lock time of 5s
[8026]#:Set the lock time of 6s
[8027]#:Set the lock time of 7s
[8028]#:Set the lock time of 8s
[8029]#:Set the lock time of 9s
1
4
78
0
9
6
5
23
Cancel
Installation settings:
5
Brightness
color
scene
Talk Volume
Adjust - Adjust +
03/15/2012 Fri.10:12
Home
Door Station
Call tone
Intercom
Call tone
DoorBell
Call tone
Clock
Ring
Volume
Night Ring
Volume
Refault to
Default
TPC
