Enphase IQ Battery 5P User manual

To exchange with ROW barcode

IQ Battery 5P Quick Install Guide

IQBattery5P

Quick Install Guide

MODEL

IQBATTERY-5P-1P-ROW

VERSION 2.0

APRIL 2023

IQ Battery 5P Quick Install Guide

To install the Enphase IQBattery5P and the wall-mount bracket, read

and follow all warnings and instructions in this guide. Safety warnings

are listed at the end of this guide. These instructions are not meant

to be a complete explanation of how to design and install an energy

storage system. All installations must comply with national and local

codes and standards. Only Enphase certied installers shall install,

troubleshoot, or replace IQBattery5P.

The IQBattery 5P system includes the battery cellpack with

integrated IQMicroinverters and battery management system (BMS).

The system requires IQ System Controller for grid-tied and backup

operations. The IQGateway inside IQSystemController measures

PV production, IQBattery 5P charge/discharge power and home

energy consumption, and it senses when it is optimal to charge or

discharge the battery so that energy is stored when it is abundant

and used when it is scarce.

Table of contents

What’s in the box

Tools/additional items required

Unboxing IQBattery5P

Section A

Mounting the product

Plan a location for the IQ Batteries

Step 1: Minimum clearance

Step 2: Mounting surface

Step 3: Install the wall-mount bracket

Section B

Installing IQ Battery 5P

Step 1: Prepare to install IQ Battery 5P on mounting

bracket

Step 2: Prepare for eld wiring

Section C

Wiring

Install conduit/raceway adapter and eld wiring

Section D

Close and energize the system

Disassembly of IQ Battery 5P cover

Congure and activate

Operation

LED overview

Operating mode and set points LED overview

Troubleshooting

Safety

IQ Battery 5P Quick Install Guide

What’s in the box

IDcover IQBattery5P

Top shield

Conduit cover

Mounting

bracket

DESCRIPTION MODEL NUMBER QUANTITY

IQBattery5P B05-T02-ROW00-1-2 1

ID cover, two conduit covers B05-CX-0550-O 1

Mounting bracket & top shield B05-WB-0543-O 1

M5 Seismic screw 2

M4 Grounding screw 2

M5 ID Cover Grounding screw 2

Quick Install Guide 1

M5 Seismic screw M4 Grounding screw M5 ID Cover

Grounding screw

Quick Install Guide

IQ Battery 5P Quick Install Guide

Tools/additional

items required

S. NO ITEM NAME QUANTITY SOURCE

1 Conduit up to 32 mm (1-1/4 in) for side entry and up to 3/4 in (19 mm) for rear entry As required Provided by Installer

2 Conduit ttings and tools must be IP55 rated when installing outdoors As required Provided by Installer

3 Raceway adapter – must be IP55 rated when installing outdoors As required Enphase store/

provided by Installer

4 Drill 1 Provided by Installer

5 4 mm pilot bit 1 Provided by Installer

6 Screwdriver 1 Provided by Installer

7 Wrench 1 Provided by Installer

8 Socket wrench 1 Provided by Installer

9 Torque wrench 1 Provided by Installer

10 Level 1 Provided by Installer

11 Conductor stripper 1 Provided by Installer

12 Stud nder (if required) 1 Provided by Installer

13 Copper conductors - 6 mm2to 30 mm2(11 mm or 7/16 in

strip length) (rated at 90°C) for terminals As required Provided by Installer

14 Control cable As required Provided by Installer

15 Personal protective equipment for handling lithium batteries

as required by local safety standards As required Provided by Installer

16 Protective gloves for protection against sharp edges As required Provided by Installer

M8 lag bolts or screws to mount the bracket on wall. Slots are 9.2 mm

(0.36 in) for wall mount and 11.2 mm (inclined slots) for pedestal. Check

with a structural engineer and local standards for requirements

Single stud

mounting

(Min. 3)

Dual stud

mounting

(Min. 4)

Provided by Installer

18 M6 screws to fasten top shield on wall

Single stud

mounting

(Min. 2)

Dual stud

mounting

(Min. 5)

Provided by Installer

19 Washers As required Provided by Installer

20 IQBattery5P lifting handles. Includes one left side and one

right side lifting handle (IQBATTERY-HNDL-5) 1Enphase store/

provided by Installer

IQ Battery 5P Quick Install Guide

NOTE: The Enphase IQBattery 5P system requires an Internet

connection through the IQGateway in the IQSystemController.

Failure to maintain an Internet connection may have an impact on

the warranty. See enphase.com/warranty for full terms.

The IQBattery 5P and IQSystemController are all connected to the

IQGateway and communicate using communication control cables.

The Enphase PV system communicates to the IQGateway using

Power Line Communication.

NOTE: The rated energy capacity of the battery is 5.0 kWh.

Install the PV system and the IQSystemController as directed by

the Enphase installation manuals.

Tools/additional

items required

IQ Battery 5P Quick Install Guide

Unboxing

IQBattery5P

Before you unbox IQBattery 5P, check the “Energize By” label on

the shipping box to verify that the IQBattery(ies) will be installed by

the date shown. If the date has passed, contact your distributor for

next steps.

1. Remove the upper packaging cover and follow the steps as

shown in the following image:

2. Inspect the packaging and the IQBattery(ies) for any signs

of damage, such as cracks, dents, or electrolyte leaks. Do

not install or use the IQBattery(ies) if it has been dropped or

damaged in any way. If damaged, contact your distributor for

replacement.

Risk of injury. Take care when lifting. The IQBattery 5P unit is

heavy (66.25 kg/146.05 lbs) and requires two people to lift it.

IQ Battery 5P Quick Install Guide

1 2 3 4

1110

6 7

Remove the six plastic

strips

Remove the exterior

cardboard box lid

Remove the four

corner guards

Remove the top shield

Remove the paper tray Remove the wall bracket Remove the other paper tray

to reveal the battery cover

Remove the IQ Battery

5P cover

Remove the two paper

trays

Remove the IQ Battery 5P

using lifting handles

Recycle packaging according

to local guidelines

Plan a location for the

IQBatteries

Mounting the product

Section A

• The IQBattery 5P housing is IP55 rated and can be installed indoors or outdoors.

The terminal blocks accept copper conductors of 6 mm2to 30 mm2.

• Make sure the installed location can sustain the total weight of the IQBatteries and mounting bracket.

Total weight for IQBattery5P, including the IQBattery 5P unit, cover and wall-mount bracket, is 78.9 kg

(174 lbs). The wall must contain blocked studs that can bear the battery weight or can be of masonry or

other suitable structure.

• Make sure there are no pipes or electrical wires where you plan to drill.

• Follow local standards (AS/NZ5139) : Choose a well-ventilated location where the ambient temperature

and humidity are within −20°C to 55°C (−4°F to 131°F) and 5% to 95% relative humidity, non-condensing,

out of direct sunlight. The optimum ambient temperature range for installation location is 0ºC to 30ºC

(32ºF to 86ºF). Provide smoke alarms in the residence in accordance with building, re, and installation

codes.

• This product must not be installed at altitudes above 2,000 m.

• Follow all local standards and regulations set forth by the

Distributed Network Service Provider (DNSP).

• Up to four IQBattery5P units can be daisy chained on a single branch circuit.

IQSystemController

supports

up to a maximum of 80 A breaker for IQBattery 5P connection circuit.

• The maximum conductor size for IQBattery5P is 30 mm

and the maximum breaker rating with this

conductor size is 80 A.

Max 4

2000m

-20°C

55°C

78.9 Kg

• Consider the dimensions of the IQBatteries, easy access, height, and length of cable when selecting

the location.

• Select a location where you can interconnect IQBattery 5P to the IQSystemController.

IQ Battery 5P Quick Install Guide

Section A - Mounting the product

Step 1:

Minimum clearance

55 cm

98 cm

19 cm

The mounting instructions that follow are for the included wall-mount

bracket only. If you wish to install IQ Battery 5P in a oor-mount

conguration, order the pedestal accessory (B05-PM-0550-O) and

refer to the oor-mount instructions that come with that product.

This product must be installed with clearance at the left, right, top,

bottom, and front of the product as shown in the gure.

Keep IQBattery 5P away from falling or moving objects,

including motor vehicles.

NOTE: These are minimum manufacturer’s clearances.

Make sure to comply with all local compliance and regulation

standards.

91 cm

15 cm

15 cm 15 cm

15 cm

If mounted in the path of a motor vehicle, Enphase

recommends a minimum mounting height of 91 cm (36 in)

above the oor.

For IQBatteries mounted at the same level, the minimum distance

between covers of two units can be up to 146 mm. Use the raceway

adapter (Enphase Accessory) between units only if the distance

between units is ≤ 165 mm (6.5 in).

IQ Battery 5P Quick Install Guide

Section A - Mounting the product

Step 2:

Mounting surface

1. Select a location where the tilt from vertical is less than 5° as

shown in the following image:

2. Make sure the mounting surface atness is within 2 mm

between boundary lines as shown in following image:

VERTICAL +5°INCLINATION -5°INCLINATION

NOTE: If the variation of the atness is more than

2 mm, the battery might not properly sit on

the wall-mount bracket through key holes. Use

spacers if the variation is more than 2 mm.

IQ Battery 5P

Side view

Top view

Mounting surface atness (across the unit installation height) shall be within 2 mm

Mounting surface should stay within indicated

2 mm gap between the boundary lines

IQ Battery 5P

Mounting wall

Mounting surface

2 mm

IQ Battery 5P Quick Install Guide

Other manuals for IQ Battery 5P

Table of contents

Other enphase Batteries Pack manuals

enphase

enphase IQ Battery-3T-1P-NA User manual

enphase

enphase ENCHARGE-3T-1P-NA User manual

enphase

enphase IQ Battery 5P User manual

enphase

enphase B05-PM-0550-O User manual

enphase

enphase IQ Battery 5P User manual

enphase

enphase B270-1200-LN-I-AU00-RV0 Assembly instructions

Popular Batteries Pack manuals by other brands

Acumentrics

Acumentrics PACK-POWER SYSTEM Quick reference guide

ACDC Dynamics

ACDC Dynamics SPF12-50 user manual

Aegis

Aegis ABL-72020P user manual

Dyness

Dyness TowerESS user manual

Growatt

Growatt APX 5.0P-S0-US user manual

EGO

EGO BAX1300 Operator's manual

CyberPower

CyberPower BCA Series installation manual

Intermec

Intermec 700 Series quick start guide

Dometic

Dometic PLB40 operating manual

V-TAC

V-TAC VT-48280-W2 instruction manual

Valence

Valence RT user guide

Nikon

Nikon MB-D14 user manual

IOGear

IOGear GBP24V Series user manual

Inventus Power

Inventus Power PROTRXion S-12V100-TRX-HD user manual

Clas Ohlson

Clas Ohlson PW-290A quick start guide

EINHELL

EINHELL MULTI-Ah Power X-Change Plus Original operating instructions

Samsung

Samsung EB-U3300 quick start guide

ECTIVE

ECTIVE LC Series instruction manual