Enox Safe-Kid-One User manual
Safe-Kid-One
User Manual
ON / OFF Button
Product Overview
Family No. 2
Speaker
SOS Button
Family No. 1
Family No. 3
Crown
Power Indicator
SIM Card
Indicator GPS Indicator
1 2
ON/OFF Button: Press the button for 5 seconds to turn
ON/OFF the watch.Press 1 second to hang up. The device
can’t be turned off by this button when the SIM card is
inserted.The device can be turned off through the APP.
Crown: Pull out the crown to adjust the time.
Safe-Kid-One Indicator
Power Indicator:
1, Low power alarm: If the power is less than 10 %, the
“power indicator” (the one at 1 o’clock) will flash red.
2, Charging: Whilst the watch is charging, the “power
indicator” will flash red. After full charge, it will be green.
SIM Card Indicator:
If the SIM card works well, the “SIM card indicator” (the one
at 9 o’clock) will flash green every 10 seconds; If no SIM
card or no signal, it will flash red.
GPS Indicator:
While the watch is indoors, the light (the one at 4 o’clock)
will flash red. While the watch is ou tdoo rs, it w ill swit ch
to green automatically within 10 minutes. Green indicates,
that the watch has GPS connection.
How to check real-time power:
After you turn on the watch, and press the ON/OFF button,
you can check the real-time power according to how many
green lights appear.
Three green lights: Power is more than 80%.
Two green lights: Power between 50% and 80%.
Only one green light: Power below 20%.
34
As shown below：
SIM Card
Rear Cover
Screw
SIM
Reset Button
Microphone
SIM Card Installation and Removal
Keep the watch power OFF, use the
screw driver to remove the rear
cover, then you can install the
SIM card.
Reset Button:
Please remove the rear cover and
press the reset button if the watch
is down.
2. Registration
2.1 Please take off the cover and insert the SIM card, then
turn on the watch.
Remarks: The watch only supports
GSM (850/900/1800/1900MHz) and
WCDMA (900/1800MHz).
2.2>. Please check the light beside
number 9 on the watch face and
be sure it flashes green.
>.
1. APP Installation
1.1>. For Android device, scan below QR code to download APP.
1.2>. For IOS device, please search “kidscare” in APP Store.
S-K-O
56
3.Log In
Please log in by the user name and code you set before.
In the home page of the APP, please check the APP
whether it is online or
offline.
Remarks:
There are three modes to
show that the APP is
online – Movement/
Static/Online.
2.3 Please send message *6* by any mobile to the watch,
you will get the reply with the watch IMEI. Then check the
IMEI to see whether it is the same as the one which is
sticked to the back of the watch. If different, please work
with the one you got in the message.
>.
2.4>. Please registrate in the APP
with user name and code.
Remarks: ID means the IMEI of
the watch.
78
a. Three family numbers correspond to the three buttons
on the left side of the watch respectively.
b. There are two ways to set family numbers.
Input three numbers on the APP, then click “submit”.
Send a message *2#NO.1#NO.2#NO.3* by any mobile
to the Safe-Kid-One phone number.
c. There are two ways to get family numbers.
Click below “Get Family Number” in the picture.
Send message *3* to kids watch phone number
d. Dial family numbers
Press the family number buttons for 5 seconds.
e. SOS
Press SOS button for
5 seconds, the watch
will automatically dial
the 3 family numbers
one by one. It will
repeat 5 times.
Meanwhile, the watch
will send the current
geographical location
link to the family
numbers.
1
2
1
2
4 Four main functions: History/Tracking/Geofence/Setting
4.1>. Setting: Family number setting/Whitelist setting/
Monitor/GPS locating/Upload interval/Remote shutdown
4.1.1>. Family number setting and SOS setting
>.
9 10
4.1.3>. Monitor
a. Monitor what’s happening around the kid.
b. Two methods to set as below:
Input phone number on APP
Send message *4* to kids watch by one of family numbers.
c. The watch will be forced to call the number you set, but the
kid will not notice it.
1
2
4.1.2 Whitelist number setting
a. Two methods to set whitelist:
Input phone numbers on APP.
Send message *7#NO.1#
NO.2#NO.3…* by one of the
three family numbers to watch.
b. Two methods to check
whitelist numbers
Check whitelist number on
APP.
Send message *8* to watch
to check whitelist numbers.
Remarks: We close the whitelist
function by default. You can
activate or close the function
by sending a message
command as per your own will. Please send the message by
one of three family numbers (if you have set them before, if
not yet, from any mobile)
Active whitelist number message : *0#1*
Close whitelist number message: *0#0*
>.
1
2
1
2
4.1.6>.Remote shutdown
We set the watch in such a way, that kids can not turn off
the watch after the SIM card has been installed. However,
it can be switched off by the APP.
11 12
4.1.4>. GPS Location
We open the GPS by default.
You can choose ON or OFF
on some occasions in order
to save the power.
4.1.5>. Upload intervals
It means the frequency of data
upload to the server. The shorter
the time is set, the faster data
upload and the quicker battery
will be used up.
600 s (Unit is seconds) has
proven to be the most reasonable
setting and the standby time will
be around 8-14h.
4.3.1>.In this interface, you could get below information:
a. Check the real-time place of watch
b. Check the latest battery capacity
c. Check current positioning
mode. When the watch is
indoors, it shows LBS,
when outdoors, it will switch
to GPS automatically within
10 minutes.
4.3.2> .You can send
message *1* by one of three
family numbers to get current
location of watch.
4.3>.Tracking
13 14
4.2>. History
Please choose the start and end time, you will be able to
check the history during that period.
4.4>.Geofence
As shown in the picture, long press any point on the map.
The point will be the center of the geographic fence circle.
Drag the scroll below to set the radius size of the
geographic fence circle.
When the Safe-Kid-One
wearer moves out of the
geographic fence, the
connected mobile phone
will vibrate and get alarm
notification thru the APP.
15 16
4.3.3>. You can change the Watch Information. Please
click I at the top right of the information box to re-edit.
S-K-O
6.Add more device on one account
In the home page of the APP, please touch upper left corner
and choose Device management, then press the icon + at the
upper right corner. Input ID number and password. ID number
is the new device IMEI. Password is 123456 by default.
17 18
5. Change password and time zone.
In the home of the APP, please touch upper left corner and
choose the System help to change the password and time
zone.
Table of contents
Languages:
