EnOcean PTM 210 User manual

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 1/18

Patent protected:

US 6,747,573

US 7,019,241

Further patents pending

Pushbutton Transmitter Device 315 MHz

PTM 210 / 210C

June 16, 2010

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 2/18

PTM 210 / PTM 210C

REVISION HISTORY

The following major modifications and improvements have been made to the first version of

this document:

No Major Changes

Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany

www.enocean.com, [email protected], phone ++49 (89) 6734 6890

Important!

This information describes the type of component and shall not be considered as assured

characteristics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry

and specifications are subject to change without notice. For the latest product specifica-

tions, refer to the EnOcean website: http://www.enocean.com.

As far as patents or other rights of third parties are concerned, liability is only assumed for

modules, not for the described applications, processes and circuits.

EnOcean does not assume responsibility for use of modules described and limits its liability

to the replacement of modules determined to be defective due to workmanship. Devices or

systems containing RF components must meet the essential requirements of the local legal

authorities.

The modules must not be used in any relation with equipment that supports, directly or

indirectly, human health or life or with applications that can result in danger for people,

animals or real value.

Components of the modules are considered and should be disposed of as hazardous waste.

Local government regulations are to be observed.

Packing: Please use the recycling operators known to you. By agreement we will take pack-

ing material back if it is sorted. You must bear the costs of transport. For packing material

that is returned to us unsorted or that we are not obliged to accept, we shall have to in-

voice you for any costs incurred.

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 3/18

PTM 210 / PTM 210C

TABLE OF CONTENT

1GENERAL DESCRIPTION................................................................................. 4

1.1 Basic Functionality......................................................................................... 4

1.2 Typical Applications ....................................................................................... 5

1.3 Technical Data.............................................................................................. 5

1.4 Mechanical Interface...................................................................................... 5

1.5 Environmental Conditions..............................................................................10

1.6 Ordering Information....................................................................................10

2FUNCTIONAL DESCRIPTION...........................................................................10

2.1 Block Diagram .............................................................................................10

2.2 Contact Nipples Designation ..........................................................................11

2.3 Transmission timing .....................................................................................12

3APPLICATIONS INFORMATION........................................................................13

3.1 Laying the antenna (PTM210C only)................................................................13

3.2 Construction of application specific Switch Rockers............................................14

3.3 Device Mounting ..........................................................................................14

3.4 Transmission Range .....................................................................................15

4AGENCY APPROVALS ....................................................................................16

4.1 CE Approval (PTM210 only) ...........................................................................16

4.2 FCC/IC Approval (PTM210C only) ...................................................................16

4.3 Japanese Type Approval (PTM210C only).........................................................18

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 4/18

PTM 210 / PTM 210C

1GENERAL DESCRIPTION

The radio transmitter device PTM 210 / PTM 210C from EnOcean enables the implementa-

tion of wireless remote controls without batteries. Power is provided by a built-in electro-

dynamic power generator. The PTM 210 / PTM 210C device serves the 868 MHz / 315 MHz

air interface protocol of EnOcean.

Electro-dynamic powered radio transmitter device PTM 210

1.1 Basic Functionality

A common electro-dynamic energy transducer is actuated by a bow (1), which can be

pushed from outside the device by an appropriate push button or switch rocker. When the

energy bow is pushed down, electrical energy is created and an RF telegram is transmitted

including a 32-bit device ID. Releasing the energy bow generates different telegram data,

so every PTM telegram contains the information that the bow was pressed or released.

“Long” or “Short” push button operation (the time between pushing and releasing the

pushbutton) can be easily detected by the receiver. By doing that, applications such as

dimming control or blinds control including slat action are simple to implement.

In addition, the PTM telegram transmits the operating status of the contact nipples (2)

when pressing the bow. This enables the identification of up to 2 appropriate switch rockers

or up to 4 pushbuttons.

(2) Contact nipples

for switch rocker

identification

(1) Energy bow

on both device sides

Rotation axis for

pushbuttons or

switch rocker

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 5/18

PTM 210 / PTM 210C

1.2 Typical Applications

Building installation

Industrial automation

Consumer electronics

Key applications are wall-mounted flat rocker switches with 1 or 2 rockers, as well as hand-

held remote controls with up to 4 single pushbuttons. Because the RF transmitters are self-

powered (no batteries), maintenance-free RF systems are possible.

1.3 Technical Data

Power supply power generation by rocker operating (Electrodynamic Power Generator)

Antenna PTM 210C external whip antenna 26.8 cm, ø1.3±0.1mm

Antenna PTM 210 internal PCB antenna

Frequency 315.0 MHz (PTM 210C) / 868.3 MHz (PTM 210)

Data rate / Modulation type 125 kbps / ASK

Channels 2 with 4 action states each (upper/lower pushbutton is pressed/released)

EnOcean Equipment Profile supported EEP 05-02-xx, 05-03-xx, 05-04-xx

Transmission range typ. 300 m free field, typ. 30 m indoor

Telegram packet length (sub telegram) 0.7 ms +/- 5%

Number of channels 2 channels with action states each

(upper/lower contact nipple is pressed/released)

Device-identifier individual 32-bit ID (factory programmed)

No. of (redundant) packets PTM 210: 3 / PTM 210C: 3–5 (depending on residual energy)

1.4 Mechanical Interface

Module dimensions (inclusive rotation axis and energy bow) 40.0 x 40.0 x 11.2 mm

Device weight 20 g ± 1 g

Energy bow travel / operating force 1.8 mm / approx. 7 N *)

*) at room temperature, only one energy bow may be actuated at the same time!

Restoring force at energy bow 0.5 N to 4 N

For the correct function of the application, the specified minimal restoring force of 0.5 N must be considered!

Number of operations typ. 50.000 actuations tested according to VDE 0632 / EN 60669

Cover material Hostaform (POM)

Energy bow material PBT (50% GV)

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 6/18

PTM 210 / PTM 210C

PTM 210 without antenna, tilted view (including rocker catwalks)

1) this catwalks are not needed when using one single rocker only 2) dimensions of rocker part

PTM 210 without antenna, top view (note cut A, B and C marking)

Ener

Bow

Sto

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 7/18

PTM 210 / PTM 210C

PTM 210 without antenna, cut A

2) dimensions of rocker part

PTM 210 without antenna, cut B and C

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 8/18

PTM 210 / PTM 210C

Hatched areas: support planes

PTM 210C with antenna (PTM 210 provides internal antenna), rear view

labeling area

antenna

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 9/18

PTM 210 / PTM 210C

2) dimensions of rocker part

PTM 210 without antenna, side view

If the rocker is not mounted on the rotation axis of PTM 210 several tolerances

have to be considered!

The measure from support plane to top of the energy bow is 7.70 mm +/- 0.3

mm!

The movement of the energy bow must not be limited by mounted rockers!

Catwalks of switch rocker must not exert continuous forces on contact nipples!

catwalks of switch rocke

rocker tilted to 5.4 degrees (corresponds to 1.8 mm energy bow travel)

press bow to stopper

support plane

mounting plane

rotary

USER MANUA

V0.9

EnOcean GmbH

Kolpingring 18a

82041 Oberhaching

Germany

Phone +49.89.6734 689-0

Fax +49.89.6734 689-50

[email protected]

www.enocean.com

Subject to modifications

PTM 210 / PTM 210C User Manual V0.9

July 7, 2010 9:36 AM

Page 10/18

PTM 210 / PTM 210C

1.5 Environmental Conditions

Operating temperature -25 °C up to +65 °C

Storage temperature -25 °C up to +65 °C

Humidity 0% to 95% r.h.

1.6 Ordering Information

Type Ordering Code

PTM 210 S3001-A210

PTM 210C S3031-A210

2FUNCTIONAL DESCRIPTION

2.1 Block Diagram

Block diagram of PTM 210

Energy Bow / Power Generator

Converts pressure on the energy bow into electrical energy.

Power Converter

Electronic converter unit for generating the device DC power supply

Processor

Contact Nipples

Energy

Bow Power

Converter

Data

DC Power

Pushed/Released

Ant

Processor

Contact Nipples

Energy

Bow Power

Converter

Data

DC Power

Pushed/Released

Ant

Other manuals for PTM 210

This manual suits for next models

Table of contents

Popular Transmitter manuals by other brands

NIVELCO

NIVELCO EasyTREK SCA-300 Series Programming manual

Honeywell

Honeywell 5816WMBR installation instructions

Kamstrup

Kamstrup READy MTU Installation and operation guide

Omega

Omega ZW Series user guide

ABB

ABB Field 264H Instructions for installation

Alinco

Alinco DJ-V17T Service manual

Dejero

Dejero EnGo 3x manual

Rosemount

Rosemount 4600 Reference manual

Speaka Professional

Speaka Professional 2342740 operating instructions

trubomat

trubomat GAB 1000 instruction manual

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 instructions

Rondish

Rondish UT-11 quick start guide

MG 10JRE instruction manual

Burkert

Burkert 8177 operating instructions

Firetide

Firetide HotPort 3203 Hardware installation guide

Tele Radio

Tele Radio T9-02 User instructions

Rotronic

Rotronic HygroFlex HF3 Series user guide

Jamara

Jamara FCX6 Pro Tel Instruction