EnGenius ENH500 Setup guide

1

How to Set up WDS Bridge on a ENH-500 (P2P)

Point-to-Point WDS Bridge should have a physical topology similar to

the picture below:

2

Please note that in order for the settings to save on this unit you need

to click save/apply under the save/reload option under Status.

3

Step #1:

Note the MAC address under the wireless MAC address field for each unit.

Step #2:

Change the IP address of each unit to be in the same subnet as your network,

outside the DHCP scope

4

Step #3:

Change the mode of operation to WDS Bridge.

Step #4:

Set the channels to be the same on all units in the WDS link.

5

Step #5:

Here is WDS link settings of device A with the Wireless MAC address of device B

in the MAC address field.

Step #6:

Here is device B WDS link settings page with Device’s A wireless MAC address

entered.

6

Step #7:

To test the link ping across the link

Step #8:

Your ping should have zero packet loss

7

Optional:

If you want encryption on your WDS link, then select the encryption method

under the security drop down menu, then the WEP key or WPA passphrase.

Note the unit will revert to G speeds when using WEP, N speeds is only

supported by AES. This has to match on both units if you chose to enable it on

one unit:

If you have trouble with your WDS Bridge link then try changing both units

channel HT from 40 Mhz to 20 Mhz.

8

If you are still experiencing problems with your WDS link, then try changing to a

non-DFS channel, and then lastly try changing the band of the units from A/N to

A only.

9

Use the following chart to determine non DFS channels. Use the FCC column.

Please keep in mind if using the 5GHz band that channels 52-140 are UNI –2

channels which radar systems commonly operate on. There is an FCC

mandated function called DFS that automatically changes the channel of any

5GHz WiFi radio including any and all EnGenius radios if radar is detected as to

avoid interference to radar systems.

The best channels to use are 34-48 and 149-165.

Other manuals for ENH500

8

Other EnGenius Wireless Access Point manuals

EnGenius

EnGenius ECB600 User manual

EnGenius

EnGenius EOC5510 User manual

EnGenius

EnGenius ECB300 User manual

EnGenius

EnGenius OA7535 User manual

EnGenius

EnGenius ENS1750 User manual

EnGenius

EnGenius ENS500EXT User manual

EnGenius

EnGenius EOC2611P User manual

EnGenius

EnGenius M35 User manual

EnGenius

EnGenius ECB150 User manual

EnGenius

EnGenius EOC5611P User manual

EnGenius

EnGenius ENS202v2 User manual

EnGenius

EnGenius ENS200EXT User manual

EnGenius

EnGenius ETR9350 User manual

EnGenius

EnGenius ECB7510 User manual

EnGenius

EnGenius EOA3630 User manual

EnGenius

EnGenius EMD2 User manual

EnGenius

EnGenius EOC-8610 Series User manual

EnGenius

EnGenius ENH202 User manual

EnGenius

EnGenius EOC-3220 User manual

EnGenius

EnGenius EAP600 Guide

EnGenius

EnGenius EAP300 User manual

EnGenius

EnGenius EOC-3610s-EXT User manual

EnGenius

EnGenius EWS500AP User manual

EnGenius

EnGenius EOC1650 User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide