EnGenius ECB150 User manual

Quick Installation Guide

ECB150 802.11b/g/n Wireless Client Bridge

Please verify contents of the box before continuing to set up the ECB150.

ECB150 * 1

12V/1A 100V~240V Power Adaptor * 1

RJ-45 Ethernet Cable * 1

Detachable Antenna * 1

CD with User's Manual * 1

Quick Installation Guide * 1

Hardware Installation

1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information,

verify with User Manual.

2) Connect one end of the Category 5e Ethernet cable into RJ-45 port of the ECB150 and the other

end to the RJ-45 port on the computer that will use the ECB150. Ensure that the cable is securely

connected to both the ECB150 and the Computer.

3) Connect the Power Adaptor DC Inlet to the DC-IN port of the ECB150 and the Power Adaptor to

the electrical out.

IP address configuration

1) After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is

on.

2) For the next steps, refer to your Operating System User Manual.

3) Once your computer is on, ensure that your TCP/IP is set to On or Enabled. (In the control panel,

double click Network Connections and then double click on the connection of your Network

Interface Card (NIC). Select Internet Protocol (TCP/IP) and then click on the Properties button.)

4) If your PC is already on a computer network, ensure that you have set it to a Static IP Address on

the interface (or Ethernet card that will use the ECB150) as 192.168.1.21 and the Subnet Mask

6709A0213730

address as 255.255.255.0. (Select Use the following IP Address radio button). Once the

computer has been prepared, proceed to setting up the ECB150.

ECB150 Setup

1) To configure ECB150, open a web browser (example: Microsoft Internet Explorer, Mozilla Firefox,

Google Chrome, etc.).

2) In the address bar of the web browser, enter 192.168.1.1 (the default IP address of the ECB150)

and hit enter.

3) A login screen will appear. By default, the username of the ECB150 is admin and the password is

admin. Enter the current username and password of the ECB150 and then click Login. Refer to

the ECB150 user manual on how to change the

username and password.

4) After clicking Login with the correct username and

password, the ECB150 Main Menu will appear. If you are

successful, proceed to setting up the wireless connection.

Switching Between Operating Modes

This device can operate in the following modes: Access Point, Client Bridge, WDS, Repeater, AP Router.

1) Click on the Operation Mode link under the System navigation drop-down menu.

2) Operating Mode: Select an operating mode from the list (Access Point, Client Bridge, or Repeater)

and then click on the Apply button.

3) All basic setup is completed. Note: The wireless connection is not secure. To setup security on the

ECB150, refer to the ECB150 User Manual.

http://192.168.1.1

Other manuals for ECB150

Table of contents

Other EnGenius Wireless Access Point manuals

EnGenius

EnGenius X-TRA RANGE ERB300H User manual

EnGenius

EnGenius EAP350 User manual

EnGenius

EnGenius Neutron EWS210AP User manual

EnGenius

EnGenius ENH200EXT User manual

EnGenius

EnGenius ENH710EXT User manual

EnGenius

EnGenius Turbo Engine Series User manual

EnGenius

EnGenius ENH200 User manual

EnGenius

EnGenius ESR-1221N User manual

EnGenius

EnGenius ENS500EXT User manual

EnGenius

EnGenius EAP600 Guide

EnGenius

EnGenius OA7535 User manual

EnGenius

EnGenius EOC-3220 User manual

EnGenius

EnGenius ENH500 User manual

EnGenius

EnGenius ENH200 User manual

EnGenius

EnGenius ETR9360 User manual

EnGenius

EnGenius ENS620EXT User manual

EnGenius

EnGenius ENS200EXT User manual

EnGenius

EnGenius ECB7510 User manual

EnGenius

EnGenius ECB600 User manual

EnGenius

EnGenius ENH500 User manual

EnGenius

EnGenius EWS330AP User manual

EnGenius

EnGenius ENS202v2 User manual

EnGenius

EnGenius ENS200 User manual

EnGenius

EnGenius EWS357APV3 User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide