Enerzone SOLUTION 1.4 User manual

READ AND KEEP THIS MANUAL FOR REFERENCE

Printed in Canada 46263_IA

SOLUTION 1.4

(EB00061 model)

Wood Stove

Owner's Manual

Part 2 of 2

INSTALLATION AND OPERATION

REQUIREMENTS

MOBILE

HOME

Safety tested according to ULC S627,

UL 1482 and UL 737 standards by an

accredited laboratory.

US Environmental Protection Agency

phase II certified wood stove compliant

with 2020 cord wood standard

CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS

IN LOCAL AREA.

READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS WOOD STOVE. FAILURE TO FOLLOW THESE

INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.

ENGLISH

2022-09-07

ONLINE WARRANTY REGISTRATION

If the unit requires repairs during the warranty period, proof of purchase must be provided.

The purchase invoice must be kept. The date indicated on it establishes the warranty period.

If it can not be provided, the warranty period will be determined by the date of manufacture of the

product. It is also highly recommended to register the warranty online at

https://www.enerzone-intl.com/en/warranty/warranty-registration/

Registering the warranty will help to quickly ﬁnd the information needed on the unit.

Dealer:

Installer:

Phone Number:

Serial Numbrer:

Page 3

Installation and Operation Requirements - Solution 1.4

ENGLISH

TABLE OF CONTENTS

1. CERTIFICATION PLATE .......................................................................................................... 4

2. General Information ................................................................................................................ 5

2.1 Performances..................................................................................................................... 5

2.2 Specifications..................................................................................................................... 6

2.3 Dimensions ........................................................................................................................ 7

2.4 EPA Loading ...................................................................................................................... 9

3. Clearances to Combustible Material.................................................................................... 10

3.1 Clearances........................................................................................................................10

4. Floor Protection .................................................................................................................... 17

5. Reducing Wall and Ceiling Clearances Safely .................................................................... 18

5.1 Shield Construction Rules ..................................................................................................18

6. Installation of options on your product................................................................................ 21

6.1 Decorative Panels..............................................................................................................21

6.2 Optional Fresh Air Intake Kit Installation ..............................................................................23

6.3 Optional Fire Screen Installation ........................................................................................24

6.4 Optional Blower And Thermodisc Installation.......................................................................25

6.5 Air Tubes And Baffle Installation..........................................................................................26

6.6 Mobile Home Installation ....................................................................................................28

7. Maintenance/Parts Replacement......................................................................................... 29

7.1 Replacement.....................................................................................................................29

7.2 Gasket..............................................................................................................................30

7.3 Door .................................................................................................................................30

8. Exploded Diagram and Parts List ........................................................................................ 33

ENERZONE LIMITED LIFETIME WARRANTY ........................................................................... 36

Page 4 Installation and Operation Requirements - Solution 1.4

ENGLISH

1. CERTIFICATION PLATE

Page 5

Installation and Operation Requirements - Solution 1.4

ENGLISH

2. General Information

2.1 Performances

Values are as measured per test method, except for the recommended heating area, firebox volume,

maximum burn time and maximum heat output.

Model Solution 1.4 (EB00061)

Type of combustion Non-catalytic

Fuel Type Dry Cordwood

Recommended heating area (sq. ft..)1 250 to 1,200 ft2(23 to 111 m2)

Overall firebox volume21.8 ft3(0.0510 m3)

Loading volume EPA 1.55 ft3(0.0439 m3)

Maximum burn time15 hours

Maximum heat output (dry cordwood)3 45,000 BTU/h (13.2 kW)

Overall heat output rate (min. to max.)2 4 12,124 BTU/h to 26,700 BTU/h

(3.55 kW to 7.83 kW)

Average overall efficiency3

(Dry cordwood) 74 % (HHV)5 79 % (LVH)6

Optimum efficiency7 80 %

Optimum overall efficiency8 79 %

Average particulate emissions rate9 1.8 g/h (EPA / CSA B415.1-10)10

Average CO11 74 g/h

1Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type

and other variables. The recommended heated area for a given appliance is dened by the manufacturer as its capacity to maintain a minimum

acceptable temperature in the designated area in case of a power failure.

2The overall rebox calculation is an approximation and is not intended to be used for loading. This volume includes a buffer zone to allow an easier

fuel insertion, prevent ash spillage and allow the air wash to work properly.

3The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft3and 20 lb/ft3. Other performances are based on

a fuel load prescribed by the standard. The specied loading density varies between 7 lb/ft³ and 12 lb/ft3. The moisture content is between 19%

and 25%.

4As measured per CSA B415.1-10 stack loss method.

5Higher Heating Value of the fuel.

6Lower Heating Value of the fuel.

7Optimum overall efciency at a specic burn rate (LHV).

8The optimum heat transfer efciency is for the low burn rate and represents the appliance's ability to convert the energy contained in the wood logs

into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

9This appliance is ofcially tested and certied by an independent agency.

10 Tested and certied in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and ASTM E3053-17 based on the ALT-125 sent by EPA

on February 28th, 2018.

11 Carbon monoxide.

Page 6 Installation and Operation Requirements - Solution 1.4

ENGLISH

2.2 Specifications

Recommended log length 16 in (406 mm) north-south

Maximum log length12 17 in (432 mm) north-south

Flue outlet diameter 6 in (150 mm)

Recommended connector pipe diameter 6 in (150 mm)

Type of chimney ULC-S629, UL 103 HT (2100 °F)

Minimum chimney height 12 feet

Baffle material C-Cast

Approved for alcove installation Yes

Approved for mobile home installation13 Yes

Type of door Simple, glazed, with cast iron frame

Type of glass Ceramic glass

Blower Optional (up to 100 CFM)

Particulate emission standard14 EPA / CSA B415.1-10

USA standard (Safety) UL 1482, UL 737

Canada standard (Safety) ULC-S627

12 North-south: ends of the logs visible, East-west: sides of the logs visible.

13 Mobile homes (Canada) or manufactured homes (USA): The US Department of Housing and Urban Development describes “manufactured homes”

better known as “mobile homes” as follows; buildings built on xed wheels and those transported on temporary wheels/axles and set on a permanent

foundation. In Canada, a mobile home is a dwelling for which the manufacture and assembly of each component is completed or substantially

completed prior to being moved to a site for installation on a foundation and connection to service facilities and which conforms to the CAN/CSA-

Z240 MH standard.

14 Tested and certied in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and draft ASTM WK47329-14. Based on ALT-125

sent by EPA on February 28th, 2018.

Page 7

Installation and Operation Requirements - Solution 1.4

ENGLISH

2.3 Dimensions

2.3.1 Stove Dimensions

10"

254mm

20"

508mm

65/8"

170mm

6"

153mm

11"

280mm

OPTION

Figure 1: Top View

17 7/8"

454mm

87/8"

225mm

10 1/4"

260mm

28 7/8"

732mm

26 7/8"

682mm

27 7/8"

709mm

21"

532mm

22 7/8"

580mm

32 1/4"

819mm

OPTION

Figure 2: Front View Figure 3: Side View

Page 8 Installation and Operation Requirements - Solution 1.4

ENGLISH

2.3.2 Combustion Chamber Dimensions

75/8"

195mm

12"

305mm

Figure 4: Door Opening

14 1/4"

360mm

11 3/4"

298mm

19 1/8"

484mm

5/16"

8mm

3/16"

5mm

Figure 5: Front View - Combustion Chamber Figure 6: Side View - Combustion Chamber

Page 9

Installation and Operation Requirements - Solution 1.4

ENGLISH

2.4 EPA Loading

The loading methods shown below are those that were used during emissions certification.

2.4.1 Air control

The air control is located underneath the ash shelf. To open the

air control, push the air control handle completely to the left

(High). This will increase the burn rate. To close the air control,

push the air control handle completely to the right (Low). This

will decrease the burn rate.

2.4.2 High burn rate (primary air control open)

Open the air control completely. Place six small pieces (2"x2")

of wood in the firebox crossing them at the greatest possible

angle. Criss cross fifteen kindling wood pieces on the small pieces of wood in three layers at the

greatest possible angle. Tie knot with five sheets of paper and place them on top of the kindling

wood. Light up the paper and let the door ajar at 90° until all the kindling wood is on fire and

the first row of small pieces of wood is on fire too. Close the door.

When there is no more fire in the front of the firebox and there are only faint flames on the wood

in the back of the firebox, break ashes, level the coal bed and put four logs in the firebox. Place

the biggest log (about 5"x5") and a medium log (about 4"x4") on the coal bed with a north-south

orientation. Place two other medium logs on the first two with the greatest possible angle. Their

should be air space between each logs and between the logs and the bricks. Let the door ajar

at 90° for approximately two minutes and then close the door.

2.4.3 Medium and low burn rate

On a 2" coal bed that is still slightly red, place five logs of approximatively 4"x4" or 3"x3" with

a north-south orientation. Place three logs on the coal bed and the other two on top with the

greatest possible angle. Their should be air space between each logs and between the logs

and the bricks. Let the door ajar at 90° for approximately 5 min. Then, close the door with the

primary air control open. Leave to burn with the primary air control open for approximately 10

minutes and then close the primary air control completely for the low burn rate and halfway for

the medium burn rate.

Page 10 Installation and Operation Requirements - Solution 1.4

ENGLISH

3. Clearances to Combustible Material

The clearances shown in this section have been determined by tests according to procedures

set out in safety standards ULC S627 (Canada), UL 1482 (U.S.A.) and UL 737 (U.S.A.). When

the stove is installed so that its surfaces are at or beyond the minimum clearances specified,

combustible surfaces will not overheat under normal and even abnormal operating conditions.

No part of the stove or flue pipe may be located closer to combustibles than the minimum

clearance figures given.

The clearances to combustible walls may be slightly different in Canada and the U.S.A. and may

also differ depending on whether single or double wall flue pipe is used. Make sure to choose

the correct clearance for the stove location and type of flue pipe.

The clearances of the appliance and the flue pipes must be met individually, meaning the appliance

cannot be installed closer to the combustible materials than the single or double wall pipe allows.

For a safe way to reduce clearances refer to section"5. Reducing Wall and Ceiling Clearances Safely"

of this manual.

3.1 Clearances

APPLIANCE CLEARANCES WITH SINGLE

WALL PIPE CONNECTOR

APPLIANCE CLEARANCES WITH DOUBLE

WALL PIPE CONNECTOR

Canada USA Canada USA

A14" (356 mm) 12" (305 mm) A6" (152 mm) 6" (152 mm)

B12" (305 mm) 12" (305 mm) B12" (305 mm) 12" (305 mm)

C11" (279 mm) 11" (279 mm) C6" (152 mm) 6" (152 mm)

If the above clearances are met, then the distances measured from the flue outlet will be:

DISTANCES13 FROM PIPE CONNECTOR

WITH SINGLE WALL PIPE CONNECTOR

DISTANCES5 FROM PIPE CONNECTOR

WITH DOUBLE WALL PIPE CONNECTORE

Canada USA Canada USA

D18" (457 mm) 16" (406 mm) D9 ¼" (235 mm) 9 ¼" (235 mm)

E18" (457 mm) 18" (457 mm) E18" (457 mm) 18" (457 mm)

F18" (457 mm) 18" (457 mm) F12 7/8" (327 mm) 12 7/8" (327 mm)

15 The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances

above mentioned.

This manual suits for next models

Table of contents

Other Enerzone Wood Stove manuals

Enerzone

Enerzone Solution 1.3 User manual

Enerzone

Enerzone Destination 1.6 User manual

Enerzone

Enerzone Euromax EP00070 User manual

Enerzone

Enerzone Solution 1.6 AGENCY PHASE II CERTIFIED WOOD User manual

Enerzone

Enerzone SOLUTION 1.7 User manual

Enerzone

Enerzone Solution 2.3 User manual

Enerzone

Enerzone Solution 2.3 User manual

Enerzone

Enerzone Solution 2.3 EB00012 User manual

Enerzone

Enerzone Destination 1.6 User manual

Enerzone

Enerzone EB00060 User manual

Enerzone

Enerzone EB00032 User manual

Enerzone

Enerzone Solution 1.6 User manual

Enerzone

Enerzone Harmony 2.3 User manual

Enerzone

Enerzone Solution 1.6 AGENCY PHASE II CERTIFIED WOOD User manual

Enerzone

Enerzone Solution 1.3 User manual

Enerzone

Enerzone Solution 1.6 AGENCY PHASE II CERTIFIED WOOD User manual

Enerzone

Enerzone Solution 1.8 User manual

Enerzone

Enerzone EB00011 User manual

Enerzone

Enerzone Solution 2.9 User manual

Enerzone

Enerzone EB00041 User manual

Enerzone

Enerzone Solution 3.4 User manual

Enerzone

Enerzone EB00002 User manual

Enerzone

Enerzone SOLUTION 3.3 User manual

Enerzone

Enerzone Solution 2.3 User manual

Popular Wood Stove manuals by other brands

Plamen

Plamen ECO MINIMAL 50 Technical manual

Austro Flamm

Austro Flamm KOKO manual

RAIS

RAIS 800 user manual

Henley

Henley Arklow Installation and operating instructions

Jøtul

Jøtul F 500 Installation and operating instructions

Englander

Englander BLUE RIDGE 100 owner's manual

WoodPro

WoodPro WS-TS-1500 owner's manual

Contura

Contura C 586W installation instructions

Nordpeis

Nordpeis N-20 T user manual

Palazzetti

Palazzetti EVA GENERAL INFORMATION - WARNINGS - INSTALLATION - MAINTENANCE

Lopi

Lopi 1250 Republic owner's manual

Panadero

Panadero CAPRI 3V Usage and maintenance instructions

RAIS

RAIS RONDO 92 user manual

RAIS

RAIS attika NEXO 100 GAS installation guide

ADURO

ADURO 15-3 Mounting instruction

Pacific energy

Pacific energy SUPER 27 SPECTRUM operating instructions

Avalon

Avalon Olympic 11190 owner's manual

Ventis

Ventis HES350 owner's manual