Endress+Hauser FieldEdge SGC200 User manual
Products Solutions Services
Operating Instructions
FieldEdge SGC200
Bluetooth Edge Device to connect measuring
technology to the Netilion Cloud
BA02058S/04/EN/01.20
71494807
2020-08-17
Revision history FieldEdge SGC200
2 Endress+Hauser
Revision history
Product version Operating Instructions Changes Comments
1.00.XX BA02058S/04/EN/01.20 Initial version –
FieldEdge SGC200 Table of contents
Endress+Hauser 3
Table of contents
1 About this document ........... 4
1.1 Document function ................... 4
1.2 Symbols used ........................ 4
1.3 Documentation ...................... 5
1.4 Registered trademarks ............... 6
2 Basic safety instructions ....... 6
2.1 Requirements for the personnel ........ 6
2.2 Designated use ...................... 6
2.3 Workplace safety .................... 6
2.4 Operational safety ................... 7
2.5 Product safety ....................... 7
2.6 Device-specific IT security ............. 7
3 Product description ............. 7
3.1 Function ............................ 7
3.2 System design ....................... 8
3.3 Communication and data processing .... 8
4 Incoming acceptance and
product identification .......... 9
4.1 Incoming acceptance ................. 9
4.2 Product identification ................. 9
4.3 Storage and transport ................. 9
5 Installation .................... 10
5.1 Installation conditions ............... 10
5.2 Mounting the device ................ 10
5.3 Post-installation check ............... 13
6 Electrical connection .......... 14
6.1 Connection conditions ............... 14
6.2 Connecting the device ............... 15
6.3 Post-connection check ............... 15
7 Operation options ............. 15
8 System integration via
SmartBlue app ................. 16
9 Commissioning ................ 16
9.1 Function check ..................... 16
9.2 Configuring the device ............... 17
10 FieldEdge SGC200 and
Netilion ........................ 23
10.1 Using the FieldEdge SGC200 in
Netilion ........................... 23
10.2 About Netilion ..................... 24
11 Maintenance .................. 24
12 Repairs ......................... 24
12.1 General notes ...................... 24
12.2 Return and / or cancellation of Netilion
Subscription ........................24
12.3 Disposal ........................... 25
About this document FieldEdge SGC200
4 Endress+Hauser
1 About this document
1.1 Document function
These Operating Instructions contain all the information that is required in various phases of
the life cycle of the device: from product identification, incoming acceptance and storage, to
mounting, connection, operation and commissioning through to troubleshooting,
maintenance and disposal.
1.2 Symbols used
1.2.1 Safety symbols
DANGER
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in
serious or fatal injury.
WARNING
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
serious or fatal injury.
CAUTION
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
minor or medium injury.
NOTICE
This symbol contains information on procedures and other facts which do not result in
personal injury.
1.2.2 Symbols for certain types of information
Symbol Meaning
Permitted
Procedures, processes or actions that are permitted.
Preferred
Procedures, processes or actions that are preferred.
Forbidden
Procedures, processes or actions that are forbidden.
Tip
Indicates additional information.
Reference to documentation.
A
Reference to page.
Reference to graphic.
FieldEdge SGC200 About this document
Endress+Hauser 5
Symbol Meaning
Notice or individual step to be observed.
1.
,
2.
,
3.
… Series of steps.
Result of a step.
Help in the event of a problem.
Visual inspection.
1.2.3 Symbols in graphics
Symbol Meaning Symbol Meaning
1, 2, 3,... Item numbers
1.
,
2.
,
3.
… Series of steps
A, B, C, ... Views A-A, B-B, C-C, ... Sections
-
Hazardous area
.
Safe area (non-hazardous area)
1.2.4 SmartBlue icons
Symbol Meaning
SmartBlue
Accessible field devices
Home
Menu
Settings
1.3 Documentation
FieldEdge SGC200
• Operating Instructions BA02058S
• Technical Information TI01452S
Basic safety instructions FieldEdge SGC200
6 Endress+Hauser
1.4 Registered trademarks
Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG,
Inc. and any use of such marks by Endress+Hauser is under license. Other trademarks and
trade names are those of their respective owners.
Apple®
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the
U.S. and other countries. App Store is a service mark of Apple Inc.
Android®
Android, Google Play and the Google Play logo are trademarks of Google Inc.
2 Basic safety instructions
2.1 Requirements for the personnel
The personnel for installation, commissioning, diagnostics and maintenance must fulfill the
following requirements:
‣Trained, qualified specialists must have a relevant qualification for this specific function
and task.
‣Are authorized by the plant owner/operator.
‣Are familiar with federal/national regulations.
‣Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the application).
‣Follow instructions and comply with basic conditions.
The operating personnel must fulfill the following requirements:
‣Are instructed and authorized according to the requirements of the task by the facility's
owner-operator.
‣Follow the instructions in this manual.
2.2 Designated use
The FieldEdge SGC200 must be installed, connected and configured in accordance with the
instructions in this manual.
The FieldEdge SGC200 is not approved for hazardous areas.
2.3 Workplace safety
For work on and with the device:
‣Wear the required personal protective equipment according to federal/national
regulations.
FieldEdge SGC200 Product description
Endress+Hauser 7
2.4 Operational safety
Risk of injury!
‣Operate the device only if it is in proper technical condition, free from errors and faults.
‣The operator is responsible for interference-free operation of the device.
Modifications to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers:
‣If modifications are nevertheless required, consult with Endress+Hauser.
2.5 Product safety
The FieldEdge SGC200 meets the legal requirements of the relevant EU directives.
Endress+Hauser has affixed the CE mark as confirmation that the FieldEdge SGC200 has been
successfully tested.
2.6 Device-specific IT security
2.6.1 Access via Bluetooth® wireless technology
Signal transmission via Bluetooth® wireless technology uses a cryptographic technique
tested by Fraunhofer AISEC.
• Connection via Bluetooth® is not possible without specific Endress+Hauser devices.
• Only one point-to-point connection between one device and one smartphone or tablet is
established.
3 Product description
3.1 Function
The FieldEdge SGC200 enables the connection of Endress+Hauser devices to the
Netilion Cloud via Bluetooth. The FieldEdge transmits device IDs, device readings and status
information. Connection to the web is via an integrated LTE modem with a global SIM card.
The FieldEdge is configured via the Endress+Hauser SmartBlue app.
You can use the transmitted data via the following offers:
• Netilion Connect or
• Netilion Services
Netilion Connect
The transmitted data can be retrieved directly via a software interface (REST JSON Application
Programming Interface (API)) and integrated into a user application.
The Application Programming Interface (API) is provided as part of the Netilion Connect
Subscription.
Product description FieldEdge SGC200
8 Endress+Hauser
Netilion Services
Netilion Services can be used for example for remote monitoring with a Netilion Service
Subscription.
3.2 System design
13 4 5
10 6
6 7
8
Netilion
9
2
1 Network architecture
1 Endress+Hauser field devices based on Bluetooth® Wireless technology
2 Encrypted, wireless remote access via Bluetooth®
3 FieldEdge SGC200
4 LTE connection
5 Netilion Cloud
6 https Internet connection
7 Netilion Services: Netilion Service app based on internet browser
8 User application
9 Netilion Connect: Application Programming Interface (API)
10 Endress+Hauser SmartBlue app
3.3 Communication and data processing
Bluetooth IEEE 802.15.1
4G/LTE
FieldEdge SGC200 Incoming acceptance and product identification
Endress+Hauser 9
4 Incoming acceptance and product identification
4.1 Incoming acceptance
• Check the packaging for visible damage arising from transportation.
• To avoid damage, remove the packaging with care.
• Keep all the accompanying documents.
The system may not be put into operation if the contents are found to be damaged
beforehand. In this case refer to the information on https://netilion.endress.com/legal/terms-
of-service. Return the system to Endress+Hauser in the original packaging where possible.
4.2 Product identification
4.2.1 Nameplate
2 FieldEdge SGC200 nameplate
4.2.2 Manufacturer's address
Endress+Hauser Process Solutions AG
Christoph Merian-Ring 12
CH-4153 Reinach
Switzerland
www.endress.com
4.3 Storage and transport
Always use the original packaging when transporting the product.
4.3.1 Ambient temperature range
–40 to 80 °C (–40 to 176 °F)
4.3.2 Storage temperature
–40 to 80 °C (–40 to 176 °F)
Installation FieldEdge SGC200
10 Endress+Hauser
4.3.3 Humidity
10 to 95 %
4.3.4 Vibration resistance
DIN EN 60068-2-64
IEC 60068-2-64: 20 to 2 000 Hz(1 m/s)2 Hz
4.3.5 Degree of protection
The device can be used in buildings and outdoors and has IP67 protection from
immersion.
5 Installation
5.1 Installation conditions
Please note the following to ensure correct operation of the FieldEdge SGC200:
• Fit the LTE antenna supplied or ordered as an optional extra on the device
• Connect the device to a voltage supply.
• Use the SmartBlue app to determine the best location for the device → 15
• The device can be used in buildings and outdoors and has IP67 protection from immersion.
• Can be installed up to a maximum altitude of 2 000 m (6 562 ft) above sea level.
• Supply voltage 8 to 30 VDC
• Permitted voltage fluctuation ± 10 %
• Input current 0.2 A
• Pollution degree 4 in accordance with IEC 61010
• Ambient temperature range –40 to 80 °C (–40 to 176 °F)
• Humidity 10 to 95 %
• Vibration resistance in accordance with IEC 60068-2-64 and DIN EN 60068-2-64:
20 to 2 000 Hz (1 m/s) 2 Hz
Only use the LTE antenna provided or the optional remote antenna; otherwise the
operating permit will lose its validity.
5.2 Mounting the device
Dimensions
• FieldEdge SGC200 without LTE antenna:
100.5 mm ⋅ 40 mm ⋅ 118.44 mm (3.94 in ⋅ 1.57 in ⋅ 4.65 in)
• FieldEdge SGC200 with angled LTE antenna (supplied):
350 mm ⋅ 40 mm ⋅ 155 mm (13.78 in ⋅ 1.57 in ⋅ 6.10 in)
Other manuals for FieldEdge SGC200
1
Table of contents
Other Endress+Hauser Wireless Access Point manuals
