Endress+Hauser Liquistation CSF39 Technical specifications

Products Solutions Services

Brief Operating Instructions

Liquistation CSF39

Automatic sampler for liquid media

These Instructions are Brief Operating Instructions; they are

not a substitute for the Operating Instructions pertaining to

the device.

Detailed information on the device can be found in the

Operating Instructions and in the other documentation

available at:

• www.endress.com/device-viewer

• Smart phone/tablet: Endress+Hauser Operations App

KA01184C/07/EN/02.16

71314891

Valid as of version

01.06.00

Liquistation CSF39

2 Endress+Hauser

TAG No.: XXX000

Ser. No.: X000X000000

Order code 00X00-XXXX0XX0XXX

www.endress.com/deviceviewer Endress+Hauser Operations App

Serial number

A0023555

Liquistation CSF39 Table of contents

Endress+Hauser 3

Table of contents

1 Document information ........................................................... 4

1.1 Warnings ........................................................................... 4

1.2 Symbols ............................................................................ 4

1.3 Symbols at the device ................................................................... 4

1.4 Documentation ....................................................................... 5

2 Basic safety instructions ......................................................... 6

2.1 Requirements for the personnel ........................................................... 6

2.2 Designated use ....................................................................... 6

2.3 Occupational safety .................................................................... 6

2.4 Operational safety ..................................................................... 7

2.5 Product safety ........................................................................ 7

3 Incoming acceptance and product identification .................................. 8

3.1 Incoming acceptance ................................................................... 8

3.2 Product identification .................................................................. 8

3.3 Scope of delivery ...................................................................... 9

3.4 Certificates and approvals ............................................................... 9

4 Installation ..................................................................... 10

4.1 Installation conditions ................................................................. 10

4.2 Installation ......................................................................... 16

4.3 Post-installation check ................................................................. 18

5 Electrical connection ............................................................ 19

5.1 Connecting the sampler ................................................................ 19

5.2 Connecting modules and sensors ......................................................... 25

5.3 Terminal assignment for input/output signals ............................................... 35

5.4 Connecting additional inputs, outputs or relays ............................................... 36

5.5 Connecting digital communication ........................................................ 38

5.6 Hardware settings .................................................................... 41

5.7 Ensuring the degree of protection ........................................................ 42

5.8 Post-connection check ................................................................. 43

6 Operation options .............................................................. 44

6.1 Overview ........................................................................... 44

6.2 Access to the operating menu via the local display ............................................ 45

6.3 Configuration options ................................................................. 46

7 Commissioning ................................................................. 50

7.1 Function check ...................................................................... 50

7.2 Switching on ........................................................................ 50

7.3 Basic setup ......................................................................... 51

7.4 Sampling programs ................................................................... 52

Document information Liquistation CSF39

4 Endress+Hauser

1 Document information

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

Consequences of non-compliance (if

applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

1.3 Symbols at the device

Symbol Meaning

Reference to device documentation

Liquistation CSF39 Document information

Endress+Hauser 5

1.4 Documentation

The following manuals which are available on the product pages on the internet complement

these Operating Instructions:

• Operating Instructions for

– Device description

– Commissioning

– Operation

– Software description (excluding sensor menus; these are described in a separate manual -

see below)

– Device-specific diagnostics and troubleshooting

– Maintenance

– Repair and spare parts

– Accessories

– Technical data

• Operating Instructions for Memosens, BA01245C

– Software description for Memosens inputs

– Calibration of Memosens sensors

– Sensor-specific diagnostics and troubleshooting

• Operating Instructions for HART communication, BA00486C

– Onsite settings and installation instructions for HART

– Description of HART driver

• Guidelines for communication via fieldbus and web server

– HART, SD01187C

– PROFIBUS, SD01188C

– Modbus, SD01189C

– Web server, SD01190C

– Web server (optional), SD01190C

– EtherNet/IP, SD01293C

• Special Documentation: Sampler application manual SD01068C

• Documentation on other devices in the Liquiline platform:

– Liquiline CM44xR (DIN rail device)

– Liquiline System CA80 (analyzer)

– Liquiline System CAT8x0 (sample preparation)

– Liquistation CSFxx (sampler)

– Liquiport CSP44 (sampler)

Basic safety instructions Liquistation CSF39

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance of the measuring system may be

carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Measuring point faults may be repaired only by authorized and specially trained personnel.

Repairs not described in the Operating Instructions provided may only be carried out

directly by the manufacturer or by the service organization.

2.2 Designated use

Liquistation CSF39 is a stationary sampler for liquid media. The samples are taken

discontinuously using a vacuum pump or peristaltic pump and are then distributed into

sampling containers and refrigerated.

The sampler is designed for use in the following applications:

• Communal and industrial wastewater treatment plants

• Laboratories and water management offices

• Monitoring of liquid media in industrial processes

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted. The manufacturer

is not liable for damage caused by improper or non-designated use.

2.3 Occupational safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable European standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

Liquistation CSF39 Basic safety instructions

Endress+Hauser 7

2.4 Operational safety

1. Before commissioning the entire measuring point, verify that all connections are

correct. Ensure that electrical cables and hose connections are undamaged.

2. Do not operate damaged products, and safeguard them to ensure that they are not

operated inadvertently. Label the damaged product as defective.

3. If faults cannot be rectified:

Take the products out of operation and safeguard them to ensure that they are not

operated inadvertently.

LCAUTION

Cleaning not switched off during calibration or maintenance activities

Risk of injury due to medium or cleaning agent

‣If a cleaning system is connected, switch if off before removing a sensor from the medium.

‣If you wish to check the cleaning function and have therefore not switched off the cleaning

system, please wear protective clothing, goggles and gloves or take other appropriate

measures.

2.5 Product safety

2.5.1 State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

Devices connected to the sampler must comply with the applicable safety standards.

2.5.2 IT security

We only provide a warranty if the device is installed and used as described in the Operating

Instructions. The device is equipped with security mechanisms to protect it against any

inadvertent changes to the device settings.

IT security measures in line with operators' security standards and designed to provide

additional protection for the device and device data transfer must be implemented by the

operators themselves.

Incoming acceptance and product identification Liquistation CSF39

8 Endress+Hauser

3 Incoming acceptance and product identification

3.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify your supplier of any damage to the packaging.

Keep the damaged packaging until the matter has been settled.

2. Verify that the contents are undamaged.

 Notify your supplier of any damage to the delivery contents.

Keep the damaged products until the matter has been settled.

3. Check the delivery for completeness.

 Check it against the delivery papers and your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

The permitted ambient conditions must be observed (see "Technical data").

If you have any questions, please contact your supplier or your local sales center.

NOTICE

Damage to the sampler

If transported incorrectly, the roof may become damaged or tear off.

‣Transport the sampler using a forklift truck. Never lift the sampler by the top. Lift it in the

middle between the upper and lower sections.

3.2 Product identification

Nameplates can be found:

• On the inside of the door

• On the packaging (adhesive label, portrait format)

3.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Firmware version

• Ambient and process conditions

• Input and output values

• Activation codes

• Safety information and warnings

‣Compare the data on the nameplate with your order.

Liquistation CSF39 Incoming acceptance and product identification

Endress+Hauser 9

3.3 Scope of delivery

The scope of delivery comprises:

• 1 Liquistation CSF39 with:

– The ordered bottle configuration

– Optional hardware

• Accessories kit

For peristaltic or vacuum pump:

Connection nipple for suction line with various angles (straight, 90°), Allen key (for version

with vacuum pump only)

• 1 print version of Brief Operating Instructions in the language ordered

• Optional accessories

If you have any questions, please contact your supplier or your local sales center.

3.4 Certificates and approvals

3.4.1  mark

Declaration of Conformity

The product meets the requirements of the harmonized European standards. As such, it

complies with the legal specifications of the EC directives. The manufacturer confirms

successful testing of the product by affixing to it the  mark.

Installation Liquistation CSF39

10 Endress+Hauser

4 Installation

4.1 Installation conditions

4.1.1 Dimensions

355 (14.0)

125 (4.9)

903 (35.6)

1508 (59.3)

625 (24.6)

471 (18.5)

816 (32.1)

753 (29.7)

250 (9.8)

A0024494

 1 Dimensions of Liquistation CSF39 plastic version with stand, dimensions in mm (in)

A Suction line connection

Other manuals for Liquistation CSF39

Table of contents

Other Endress+Hauser Laboratory Equipment manuals

Endress+Hauser

Endress+Hauser Liquiline Control CDC90 User manual

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRobot II 96 G User manual

Endress+Hauser

Endress+Hauser analytikjena CyBio QuadPrint HQ User manual

Endress+Hauser

Endress+Hauser CPY7B User manual

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant PQ 9000 User manual

Endress+Hauser

Endress+Hauser analytikjena CyBio QuadPrint HQ-M User manual

Endress+Hauser

Endress+Hauser Analytik Jena APU 28 Series User manual

Endress+Hauser

Endress+Hauser Analytik Jena SpeedMill PLUS User manual

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO User manual

Endress+Hauser

Endress+Hauser Liquistation CSF48 User manual

Endress+Hauser

Endress+Hauser Analytik Jena Automatic Boat Drive User manual

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 User manual

Endress+Hauser

Endress+Hauser Liquistation CSF48 Manual

Endress+Hauser

Endress+Hauser OXY5500 QF Firmware update

Endress+Hauser

Endress+Hauser StamoSens CNM 750 User manual

Endress+Hauser

Endress+Hauser Liquistation CSF34 User manual

Endress+Hauser

Endress+Hauser analytikjena Biometra ThermoShaker TSC How to use

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO User manual

Endress+Hauser

Endress+Hauser Liquiphant FTL62 Density User manual

Endress+Hauser

Endress+Hauser asp-port d 2 User manual

Endress+Hauser

Endress+Hauser analytikjena multi N/C 2100 User manual

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TOne How to use

Endress+Hauser

Endress+Hauser analytikjena qTOWER User manual

Endress+Hauser

Endress+Hauser Analytik Jena APUsim User manual

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide

Yamato

Yamato BM510 instruction manual