Endon Leyton User manual

Assembly/ User Instructions

INSTRUCTION MANUAL

Please read these instructions carefully before fitting your new light and retain for reference.

For Indoor use only

Do not plug into the mains until you have installed a correct bulb.

This product is only suitable for connection to 240V~50Hz supply and is not suitable for a Bathroom location.

The Table Lamp must be protected by a 3 amp fuse in the mains plug.

The Class II, Double Insulated symbol is on the Lamp so the Lamp does not require an Earth and Live or

Neutral must not be connected to Earth.

If any modification is made it will invalidate the warranty and may render the product unsafe.

If the mains cable becomes damaged it must only be replaced by a technically competent, qualified person.

If the mains plug requires replacing use a plug approved to BS1363 with 3 Amp fuse and wire it up according to the

diagram below; Class II (Double Insulated)

If there is a “Minimum Distance” Label, please do not allow Flammable Materials to rest within that distance from the

bulb(s). Never cover any lamp with any object or material.

The shade becomes extremely hot, so please allow to cool before adjusting the angle of the head.

1. Completely unpack your Table Lamp, removing any transit packaging.

2. Install the bulb (1),do not install bulbs with a greater wattage or different shape than specified on the label.

3. Energy saving replacement bulbs: this lamp is suitable to use these lamps.

4. Plug in and turn on the in line switch to try your lamp.

If your Table Lamp will not illuminate, please check the 3 amp fuse in the plug and ultimately check the

relevant fuse in your Fuse Box.

If unsuccessful please consult your Retailer.

All Table Lamps for UK Market are designed for 240V ac, 50 Hz (220- 240V ac)

Please retain these instructions for future reference.

Switch off, remove plug and allow 10 minutes to cool before adjusting head, replacing bulb or cleaning using

only a dry cloth.

Assembly/ User Instructions

Leyton Table Lamp

Safety Warnings

This pack contains:

1x Table Lamp with a head adjustable for angle

Tools required: none except if replacing plug:

Small electrical screw driver

Minimum Distance: This is

the symbol which denotes

this requirement.

Distance

Care Information

Use only R80 bulb or Energy Saving Replacement

Class II

Endon Lighting Ltd

Leeds

LS9 0SE

H41 10

Table of contents

Other Endon Outdoor Light manuals

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual