The most important conditions for proper and safe use of the equipment together with the wall
mount are: the correct selection of the wall mount for the TV or monitor and the correct mounting
of the wall mount on the wall and the attachment of the TV / monitor on the wall mount.
Before installing, please make sure that the model of the wall mount you have purchased fully
matches the parameters of the TV for which you want to use the wall mount.
First of all, make sure that: - the weight of the TV does not exceed the maximum permissible load
on the wall mount, - the diagonal of the TV screen falls within the range of diagonals
recommended for the wall mount, - the spacing of the mounting holes located on the back wall of
the TV (usually according to vesa standard) falls within the range of the spacing of the mounting
holes of the wall mount.
IMPORTANT WARNINGS BEFORE INSTALLATION.
The structure of the wall must be such as to maintain a load corresponding to the load
parameters given for the handle model and to the weight of the equipment mounted on the
handle. If this condition is not met, the face must be reinforced to obtain the appropriate maximum
load.
The installation of the wall mount and equipment must be carried out in accordance with
the installation instructions of the wall mount and the instructions of the equipment manufacturer,
provided that the equipment manufacturer gives instructions or recommendations for installation
on the wall mounts.
The installation of the wall mount requires basic knowledge and skills in the installation of
such devices and the use of basic tools enabling the making of appropriate holes in the wall, the
placement of dowels with appropriate parameters for a given type of wall structure, and screwing
the fixing screws and screwing the TV /monitor to the handle. In case of doubt or lack of suitable
tools, we recommend that you contact a specialized assembly plant for this type of equipment.
Do not install on a structure that is subjected to vibrations, movements, shifts, or is
exposed to impacts or any type of impact and shock. Failure to comply with this condition may
result in damage or damage to equipment and walls, material damage and danger to the user.
Do not install on loose structures, on walls made of unknown material, on any surface
whose load carrying capacity and rigidity is inspecified or in doubt. In such cases, you should
consult a construction specialist, the administrator / owner of the building or the relevant building
documentation.
Do not install in the vicinity of appliances that heat or operate with open flames, such as
fireplaces, in places exposed to direct sunlight, or any factors causing strong heating or cooling,
such as air conditioning systems, or causing high humidity. Failure to do so may damage or
damage the TV, equipment and walls, material damage and danger to the user.
