Elvox 40510 User manual

Instruction manual

40510

7” Due Fili Plus porter switchboard

GENERAL INFORMATION

Device 40510 is a switchboard for the DueFili Plus video door entry system, equipped with a 7-inch colour screen. It can

be used in hands-free mode or with a handset.

The instruction manual can be downloaded from www.vimar.com

Installation rules

Installation should be carried out in compliance with the current regulations regarding the installation of electrical equipment

in the country where the products are installed.

Regulatory Compliance

EMC directive

Standards EN 60065, EN 61000-6-1 and EN 61000-6-3.

INFORMATION FOR USERS UNDER DIRECTIVE 2002/96 (WEEE)

In order to avoid damage to the environment and human health as well as any administrative sanctions, any appli-

ance marked with this symbol must be disposed of separately from municipal waste, that is it must be reconsigned

to the dealer upon purchase of a new one. Appliances marked with the crossed out wheelie bin symbol must be collected

in accordance with the instructions issued by the local authorities responsible for waste disposal. For more information call

the free-phone number 800-862307.

This product was developed using FreeRTOS

software - http://www.freertos.org/

VIMAR group

7” Due Fili Plus porter switchboard

Main functions

The switchboard offers the following functions:

1. making and receiving audio calls with the indoor units;

2. receiving audio/video calls from the speech units;

3. implementing automatic self-starts from the speech units;

4. forwarding speech unit calls to indoor units;

5. calling another switchboard;

6. managing warnings from indoor units;

7. managing speech unit locks, stair lights and system relays;

8. activating CCTV cameras for monitoring purposes;

9. logging calls, warnings and activations.

Advanced functions

1. management of Competence Areas

2. management of operation time bands (Day/Night)

3. interception / non-interception of calls (Indoor/Outdoor mode)

The following languages are supported:

1. Italian

2. English

3. French

4. German

5. Spanish

6. Greek

7. Portuguese

Technical characteristics

Technical data:

• Supply voltage: 28VDC nominal

Power supply via power supply unit 6923 (not supplied)

• Maximum absorption: 300 mA

• Absorption in standby: 86 mA

• 7-inch colour display, 800x480 pixel resolution, 16:9 format

• Ambient class: Class A1 (indoor use)

• Protection degree IP30

• Operating temperature: -5°C to +40°C (indoor use)

• Operating ambient humidity 10 - 80% (non-condensing)

• Electronic chimes with different tunes (10 melodies).

• Dimensions: 242x213x221 mm (WxHxD with support open)

• DIP switch for line impedance termination.

7” Due Fili Plus porter switchboard

Front view

Keyboard

Handset

Screen

Rear and side view

Mini USB connector

for connection to

a PC

RJ45 socket for connection

to the Due Fili Plus system

via stud

Dip switch for video

termination

VIMAR group

7” Due Fili Plus porter switchboard

Keyboard

Key Description

Menu / Select

Exit / Cancel

Down

Alphanumeric keys

Hands-free

End Conversation

Internal / External

Day / Night

Self-start

Keyboard lock

Hold

Input / Transfer

F1 (programmable)

F2 (programmable)

Contacts List

List of alert notiﬁcations

Events list

Lock

7” Due Fili Plus porter switchboard

Indicators

LED Status Description

Steady light Power - Switchboard on

Steady light Switchboard connected to a PC via USB

Flashing light Unanswered call indication and/or alert notiﬁcation

VIMAR group

7” Due Fili Plus porter switchboard

External connections

Switchboard 40510 is connected via the “Interconnecting stud” and the corresponding RJ45 Cat. 5E connection cable

supplied.

+U +I

PRI

6923

BU OG BK RD

WHBNYEGN

Important: Strictly observe the connections on the con-

necting stud. Inverted wiring connections may lead to the

switchboard being damaged.

Due Fili Bus

Important: The maximum connection dis-

tance between power supply unit 6923

and the interconnecting stud is 10 m.

Interconnecting

stud

Length: 3 m

Mains

Power

Supply unit

7” Due Fili Plus porter switchboard

+U +I

PRI

6923

BU OG BK RD

WHBNYEGN

• Note: We recommend connecting the cables with a fork Faston of a size suited to the stud screws, and inserting

it between the head of the screw and the washer, arranging the cables so as to avoid contact between adjacent

Fastons.

Connection correspondence table: interconnecting stud - Due Fili system

Connection box terminals Connection box wire colour Due Fili audio / video door entry system

BU 1•

Blue 1 (Due Fili Bus)

OG 2•

Orange 2 (Due Fili Bus)

BK 3•

Black from power supply unit 6923 terminal -

RD 4•

Red from power supply unit 6923 terminal +I

GN 5•

Green -

YE 6•

Yellow -

BN 7 •

Brown -

WH 8•

White -

Access hole for Due Fili

Bus and power supply

cables

to switchboard

Video Termination

Select DIP switch to terminate the video signal

A) if the BUS cable enters terminals BU (1), OG (2) of the switchboard interconnecting stud and continues to another indoor

unit.

B) when a BUS cable with typical impedance of 100 Ohm (Elvox cable 732I or 732H) enters terminals BU (1), OG (2) of the

interconnecting stud and the riser stops in the switchboard.

C) when a BUS cable with typical impedance of 50 Ohm (Cat. 5 or Cat. 6 twisted pair cable) enters terminals BU (1), OG (2) of

the interconnecting stud and the riser stops in the switchboard.

VIMAR group

7” Due Fili Plus porter switchboard

GRAPHICAL INTERFACE

First line

The following icons may appear on the ﬁrst line of the screen, starting from the left:

The ringtone is disabled. The switchboard nevertheless accepts calls and it is possible to answer.

A notiﬁcation that a door is open has been received.

The microphone is disabled.

The keyboard is locked.

The conversation is taking place in hands-free mode.

The conversation is taking place via the handset.

Internal mode

External mode



Internal mode with call ﬁlter enabled



External mode with call ﬁlter enabled

Automatic Internal/External enabled

Automatic Internal/External disabled

Last line

The date and time appear on the last line, in the format chosen during conﬁguration.

7” Due Fili Plus porter switchboard

Standby

Stand-by screen

The switchboard enters standby mode after a speciﬁed time. In this mode, screen brightness is reduced and electricity

consumption limited.

If a function button is pressed when the switchboard is in standby, that function is implemented immediately once the

switchboard has awoken. In standby, the key wakes up the switchboard without implementing any other functions.

Keyboard

The keys carry out their functions when released.

If pressed for at least 0.5 seconds, the following keys perform another function:

KEY STANDBY TALKING

Ringtone mute Microphone mute

(Not applicable) Change parameter in adjustment

Self-start list

Activation list

To serve similar events “indirectly” (Not applicable)

To serve similar alerts “indirectly” (Not applicable)

With events / alert ﬁlter enabled, enter the

ﬁlter ID.

(Not applicable)

When viewing the contacts list, exit directly

to standby if the ﬁlter is enabled

(Not applicable)

When viewing events / alert, to delete them

after entering the installer PIN

(Not applicable)

During clock adjustment, requests the date/

time from the device conﬁgured as Master

Clock

(Not applicable)

Table of contents

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual

Bticino

Bticino Classe 300 installation manual