ELTEC CYBOX GW 2-P User manual
Revision: 1.3 | Date: 04.11.2022
es
CYBOX GW 2-P
MOBILE WIRELESS GATEWAY WITH 5G AND WI-FI 5 / WAVE 2
INSTALLATION MANUAL
II
CYBOX GW 2-P
es
INSTALLATION MANUAL
LIST OF CHANGES
ISSUE
CHANGE DESCRIPTION
DATE
1.0
Initial version
2022-07-25
1.1
Adoption of antenna description / Added chapter mezzanine
extensions
2022-07-26
1.2
Chapter correction
2022-08-01
1.3
Chapter mezzanine extensions extended
2022-11-04
III
CYBOX GW 2-P
es
INSTALLATION MANUAL
DISCLAIMER
Copyright
© 2022 ELTEC Elektronik AG. The information, data, and figures in this document including respective
references have been verified and found to be legitimate. In particular in the event of error they may,
therefore, be changed at any time without prior notice. The complete risk inherent in the utilization of this
document or in the results of its utilization shall be with the user; to this end, ELTEC Elektronik AG shall not
accept any liability. Regardless of the applicability of respective copyrights, no portion of this document
shall be copied, forwarded or stored in a data reception system or entered into such systems without the
express prior written consent of ELTEC Elektronik AG, regardless of how such acts are performed and what
system is used (electronic, mechanic, photocopying, recording, etc.). All product and company names are
registered trademarks of the respective companies.
Our General Business, Delivery, Offer, and Payment Terms and Conditions shall otherwise apply.
SAFETY INFORMATION
Electrical safety
WARNING
The device can be operated with voltages over 75 V DC.
Incorrect handling risks causing a fatal electrical shock.
Before connecting the power supply, connect the device to protective earth.
General advice
•Only qualified personnel is allowed to install, operate and maintain the devices.
•Please take safety precautions against electrostatic discharge (ESD).
•Access to the devices may only be granted to qualified personnel.
•To prevent the risk of electric shock, turn off the external power supply and remove the power
supply cable from the electrical outlet before handling or disassembling the system.
•When adding or removing devices to or from the system, ensure that the power cables for the
devices are unplugged before the signal cables are connected.
•Make sure that your power supply is set to the correct voltage in your area. If you are not sure about
the voltage of the electrical outlet you are using, contact your local power company.
•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or
your retailer.
IV
CYBOX GW 2-P
es
INSTALLATION MANUAL
Operation safety
WARNING
The device can become very hot during operation (> 80 ° C).
Make sure it is protected from accidental contact.
The device must be installed so that it is not accessible to children.
To prevent burns, switch off the device and allow to cool down for half an hour
before disassembling or working on it.
•Before installing the device and connecting cables to it, carefully read the related manuals.
•Before using the device, make sure all cables are correctly connected and the power cables are not
damaged. If you detect any damage, contact your dealer immediately.
•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may
become wet.
•Place the product on a stable surface.
•If you encounter technical problems with the product, contact a qualified service technician or your
retailer.
Radio Frequency Exposure Statement
At least 20 cm separation distance between the antenna and the user’s body must be maintained at all
times.
RECYCLING
Please recycle packaging environmentally friendly:
Packaging materials are recyclable. Please do not dispose packaging into domestic waste but
recycle it.
Please recycle old or redundant devices environmentally friendly:
Old devices contain valuable recyclable materials that should be reutilized. Therefore please
dispose old devices at collection points which are suitable.
EU DECLARATION OF CONFORMITY
ELTEC Elektronik AG herewith declares that the device is compliant to the basic
requirements of the directive 2014/53/EU. The full text of the EU declaration of
conformity is available in the Download Center at www.eltec.com.
V
CYBOX GW 2-P
es
INSTALLATION MANUAL
CONTACT
ELTEC Elektronik AG
Galileo-Galilei-Straße 11
55129 Mainz
Germany
Fon +49 6131 918 100
Fax +49 6131 918 195
Email [email protected]
www www.eltec.com
VI
CYBOX GW 2-P
es
INSTALLATION MANUAL
CONTENTS
1ABOUT THIS DOCUMENT 1
2OVERVIEW 2
2.1 Products 2
3HARDWARE 3
3.1 Device Connectors 3
3.1.1 Power Supply Connector 3
3.1.2 M12 Ethernet Interfaces 3
3.1.3 M12 Service Interface (USB and Serial Port) 4
3.2 Mezzanine extensions 5
3.2.1 MVB Interfaces 5
3.2.2 2.5 Gbps Ethernet Interface 6
3.2.3 M.2 PCIe SSD Extension 6
3.3 Antenna Connectors 7
3.4 Front Panel and Module-to-Antenna Connections 8
3.4.1 Correlation Front Panel Labelling –Software 9
3.5 LED Indicators 10
3.5.1 Power LED Status 10
3.5.2 Status LED 1 10
3.5.3 Status LED 2 10
3.5.4 Module 1-4 LED Status 11
3.5.5 LAN LED (100 M | 1000 M) Status 11
3.6 Reset Switch 11
3.7 SIM Cards 12
4MOUNTING 13
4.1 Connecting an Earthing Cable 14
4.2 Electrical Connection 14
VII
CYBOX GW 2-P
es
INSTALLATION MANUAL
LIST OF TABLES
Table 1 Pin Assignment of Power Supply Connector (PWR) 3
Table 2 Pin Assignment of M12 Ethernet Connectors (LAN 1/2) 3
Table 3 Pin Assignment of M12 Service Connector 4
Table 4 Pin Assignment of MVB Connectors 5
Table 5 Pin Assignment of 2.5 Gb M12 Ethernet Connector (LAN 3) 6
Table 6 Overview Front Panel Antenna Description 9
Table 7 Power LED Status 10
Table 8 Status LED 1 10
Table 9 Status LED 2 10
Table 10 Module 1-4 LED Status 11
Table 11 LAN LED Status 11
Table 12 Reset Switch Behavior 11
VIII
CYBOX GW 2-P
es
INSTALLATION MANUAL
LIST OF FIGURES
Figure 1 Picture of CyBox GW 2-P 2
Figure 2 Example M.2 PCIe SSD 6
Figure 3 Examples of Front Panels 8
Figure 4 SIM Slot Assignment per Modem 12
Figure 5 Dimensions of the Housing 13
Figure 6 Earth Cable Mounting on Earth Stud 14
1
CYBOX GW 2-P
es
INSTALLATION MANUAL
1ABOUT THIS DOCUMENT
This installation manual is intended only for system developers and integrators. It is not intended for end
users.
It describes the hardware functions of the product, connection of peripheral devices and integration into
a system. Additional information on special applications and the configuration of the product is available
in a separate configuration manual which can be downloaded from the Download Center at
www.eltec.com.
2
CYBOX GW 2-P
es
INSTALLATION MANUAL
2OVERVIEW
2.1 PRODUCTS
This installation manual comprises all information to set-up the following product.
Figure 1 Picture of CyBox GW 2-P
Table of contents
Other ELTEC Gateway manuals
Popular Gateway manuals by other brands
LST
LST M500RFE-AS Specification sheet
Kinnex
Kinnex Media Gateway quick start guide
2N Telekomunikace
2N Telekomunikace 2N StarGate user manual
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE user guide
Telsey
Telsey CPVA 500 - SIP Technical manual
