(D) SWITCHING BETWEEN T1 AND T2
(B) MAIN COMPONENTS
S1
S2
S4
S3
Crown
Hour Minute
Second
Hold S3 for about 4 sec to T1/T2
(A) SPECIFICATION
1. Type: Ana-digi Quartz Watch
2. Additional functions:
Digital hour, Minute, Second (6 digit), Day, Year, Month, Date
Chronograph
Alarm
Timer
Dual Time
3. Power cell no.: CR2025 or Equivalent
4. Water Resistant: 100M
(C) ANALOGUE TIME SETTING
Pull out the crown when the second hand at the 12 O'clock position.
Turn the crown clockwise or anti-clockwise to the desired time.
Push the crown back.
Hold S1 for about 5 sec to set Push S3/S4 to reset sec. '00' Push S3/S4 to adjust hour
Push S3/S4 to adjust minute Push S3/S4 to adjust year Push S3/S4 to adjust month
(E) DIGITAL TIME AND CALENDAR SETTING
ELI 614
S1
S2
S4
S3
S1
S2
S4
S3
Push S2
to Minute
Setting
Push S2
to Year
Setting
Push S2
to Month
Setting
S1
S2
S4
S3
S1
S2
S4
S3
S1
S2
S4
S3
Push S2
To Hour
Setting
S1
S2
S4
S3
S1
S2
S4
S3
Hold S3 To T1/T2
S1
S2
S4
S3
PERFORMANCE SERIES
P-400 AN
ED008U
IMPORTANT
• Push buttons are not to be operated under water.
• This watch contains electronic components. Never attempt to open
the case or remove the back cover.
• Should water or condensation appear in the watch, have the watch
checked immediately, corrosion of electronic parts can occur inside
the case.
• Avoid exposing the watch to extreme temperature.
• Avoid severe impact. The watch is designed to withstand impact
under normal use. It is inadvisable to subject it to severe impact or
rough usage.
• Clean the watch with soft cloth and clean water only. Avoid using
chemicals - especially soap as the waterproof gasket will corrode.
• Keep watch away from the conditions of strong electric field and static
electricity.
• Replace battery by authorized service centre. Otherwise, the water
resistance function may be affected.
• For watches fitted with resin straps. You may notice a whitish powdery
substance on the band. This substance will not harm your skin or
clothing, and can be removed by simply wiping it with a cloth.
• For watches with light colour and transparent straps, there may be
colour change on the strap after wear for some time.
• Do not return crown to normal position while chronograph second
hand returns to 12:00 (ZERO) position.
• Hand stops on the way when crown are returned to normal position
and these positions are recognized as 12:00 (ZERO) position.
• Before resetting the time, make sure the chronograph is not in function
and the chronograph hands are precisely at zero.
• Calendar position may vary, depending on design. But the functions
and setting are the same.
