CLD-100
HALOGEN LEAK DETECTOR
Instruction Manual
General Information
Incorporated with advanced leak detection technology, CLD-100 is
Detect all kinds of halogen refrigerants
an ideal and economic halogen leak detector.Compact in appearance,
it is stable and easy to operate.
Sensitivity can be adjusted at any time and the detector can be adjusted
automatically to the best state of detection.
Inner precise IC with ultra-low circuit consumption offers more stable
function and lengthens battery life.
Two-color visual display of battery voltage.
Excellent sensor brings high sensitivity and longer service time.
General Information
Detection Range
Battery lndicator
The forepart light of panel indicates the leak and the battery voltage.
GREEN Battery voltage is normal, sufficient for proper operation.
ORANGE Battery voltage is approaching the lower threshold for
operation.
Replace them as soon as possible.
CFCs e.g.R12,R11,R500,R503 etc.
HCFCs e.g.R22,R123,R124,R502 etc.
HFCs e.g.R134a,R404a,R125 etc.
Blends such as AZ-50, HP62, MP39 etc.
Detect Ethylene Oxide gas leaks in hospital sterilizing equipment
(it will detect the halogenated carrier gas).
Detect SF-6 in high voltage circuit breakers.
Detect most gases that contain Chlorine, Fluorine and Bromine(ha
logen gases).
Detect cleaning agents used in dry cleaning applications such as
perchloroethylene.
Detect halogen gases in fire-extinguishing system.
Operating temperature:
Maximum sensitivity:
Battery life:
Response time:
Work mode:
Fixed probe length:
Warm-up time:
Reset time:
Power supply:
0℃to 52℃(30℉to 125℉)
6 gr/yr, for all halogenated refrigerants
approximately 20 hours in normal use.
instantaneous.
continuous, no limitation.
20cm.
approximately 6 seconds.
2-10 seconds.
6V DC, four AAA excellent batteries.
The CLD-100 may also be used to detect leaks in other systems and storage
/recovery containers.It will respond to all halogenated (including Chlorine and
Fluorine) refrigerants. This includes but is not limited to:
