Elitech EL-026 User manual
WASHER
8*
13(×3)
2
SPRING WASHER
5/16"(×3)
3
WASHER
12.5*
25*
T=3(×3)
1
NYLON NUT
5/16"(×3)
4
BRAKE SCREW
M6*P1.0
*L6mm(×2)
5
WRENCH
NO.13(×1)
8
ALLEN WRENCH
NO.3(×1)
6
ALLEN WRENCH
NO.4(×1)
7
76
LCD MOUNT
76mm(×2)
C
82
LCD MOUNT
82mm(×1)
D
JOINT(×1)
B
TUBE
L400(×1)
E
CABLE CLIP(×1)
G
SCREW
M4*P0.7*
L12mm(×12)
9
FOR LCD monitor
F
BASE(×1)
A
FOLD ARM(×1)
C
or
D
9
To install LCD Mount(C) in the back of monitor:
Locate mounting screw fixtures on the back
of monitor and attached LCD mount(C OR D)
with screw(9).
Make sure the screw(9) match to your monitor
hole to fix the LCD Mount(C OR D).
Component list
EL-026
A
G
To route your cable from the cable case
which inside of the Fold arm(A) and
cable clip(G) for a tidy look.
STEP 4
STEP 3
CC
D
A
2
3
4
B
1
Installing LCD Mount(C) to Fold arm(A)
and LCD Mount(D) to Joint(B).
E
G
F
STEP 1
Installing Tube(E) on the base(F) and
then put on the Cable clip(G) on the
tube for cable management.
Fixed the brake screw(3) with Allen
wrench(6) to avoid rotation of the tube.
STEP 2
A
B
E
Put the Fold arm(A) and Joint(B) through
the Tube(E).
To adjust the height of Fold arm(A) and
Joint(B) with Allen wrench(7).
6
3
4
7
8
Assembly steps
Answer:
Please follow steps below to set the tilting angle
Use a flat-blade screwdriver
to push open the caps.
2.
1.
Locate the two caps which
are on each side of the axis
of the monitor bracket.
3.
Loosen the nut adjust
the tilting angle then
tighten the nutadain.
loose
tighten
WRENCH NO.13
30
90
2.
1.
SCREWDRIVER
Why my monitors keep flopping?
Other Elitech Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
