Elite Screens Evanesce B Series Guide

Evanesce/Evanesce Tension Vertical Limit Switch

Adjustment Instructions

Caution: The screen’s Top Black Masking is already set to its maximum distance. There is NO extra

black top drop in the roller. Attempting to increase the drop will damage the motor and VOID your

warranty with Elite Screens. DO NOT use these instructions to try and get more out of your

standard black masking drop. Please contact Elite Screens before making any adjustments.

A. If you over adjust the rise position the screen will attempt to go further into the case and

cause it jitter and bounce.

B. If you over adjust the drop position the screen will begin to reverse itself back up.

C. eversing the adjustments should bring the screen back to normal operation

1. Allen Wrench

Fig. 1

2. Limit switch adjustment holes

Note: The limit switches can only be viewed when the screen material is completely deployed.

They are located on the right side of the screen when facing the back.

Fig. 2

UP adjustment switch

DOWN adjustment switch

5/32” Allen wrench

Note: When turning the limit switches bear in mind that a full-circle in either direction will create

a one inch adjustment.

3. How to adjust the Retract (rise) position (shown in Fig. 3 to Fig. )

Fig. 3

Fig. 4

Fig. 5

Use the allen-wrench

to turn the UP switch

counter

clockwise

If the screen does not retract

completely (as shown in ig.

3), use the following steps.

Press the UP button on the

remote first to retract the

screen as much as possible.

NOTE: Adjustment should be made

while facing the back of the screen

Fig. 6

How to adjust the position of the top black masking border

(shown in Fig. 7 to Fig. 9)

Note: All electric screens come with standard top black masking and they cannot be dropped

further. DO NOT use these instructions to try to get more out of your standard black masking

drop.

Fig. 7

One full turn will retract your screen by 1”. In order

to see adjust ent, deploy and retract the screen.

(Warning: If you continue to rotate the switch once

the weight bar fits flush with the casing, the screen

will atte pt to retract further, causing da age to the

unit. DO NOT over turn the switch).

If you need to decrease the amount of

top black masking, refer to the

following steps.

If the screen retracts too far in, press the DOWN

button on the remote to expose the limit switches.

Rotate the UP adjustment switch 1-2 turns

clockwise. Then press the UP button on the

remote to see the new retract position.

Use your remote control to fully lower

the screen.

Fig. 8

Fig. 9

Note: As a rule, Elite Screens does not recommend making any unnecessary

adjustments to the screen, as improper adjustment will damage the unit.

Please contact Technical Support for assistance @ (877) 511-1211.

Use your allen-wrench to turn the

DOWN switch clockwise.

One full turn equals 1” of decreased drop. In order

to notice the adjust ent, retract and deploy the

screen. Warning: Over adjusting the switch will

da age the otor and void the warranty.

NOTE: Adjustment should be made

while facing the back of the screen

Other manuals for Evanesce B Series

This manual suits for next models

Table of contents

Other Elite Screens Projection Screen manuals

Elite Screens

Elite Screens F60XWV1 User manual

Elite Screens

Elite Screens Kestrel Home Series User manual

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES User manual

Elite Screens

Elite Screens YardMaster 2 WraithVeil Dual Series User manual

Elite Screens

Elite Screens VMAX113XWS Manual

Elite Screens

Elite Screens GolfSim Bay Series User manual

Elite Screens

Elite Screens AEON series User manual

Elite Screens

Elite Screens TE100HC2 User manual

Elite Screens

Elite Screens VMAX2 (Plus) Series User manual

Elite Screens

Elite Screens AR120WH2 User manual

Elite Screens

Elite Screens AR100H User manual

Elite Screens

Elite Screens CineTension Series User manual

Elite Screens

Elite Screens QuickStand Series User manual

Elite Screens

Elite Screens Elite Tripod Series User manual

Elite Screens

Elite Screens F100NWH User manual

Elite Screens

Elite Screens TE100HC2 User manual

Elite Screens

Elite Screens Elite Vmax Series User manual

Elite Screens

Elite Screens F100NWH Owner's manual

Elite Screens

Elite Screens Insta-RP2 Screen Series User manual

Elite Screens

Elite Screens ezCinema Series User manual

Elite Screens

Elite Screens Aeon CineGrey 4D AT Series User manual

Elite Screens

Elite Screens Evanesce B Series User manual

Elite Screens

Elite Screens TE100HC2 User manual

Elite Screens

Elite Screens SilverFrame 100GH1 User manual

Popular Projection Screen manuals by other brands

FART PRODUKT

FART PRODUKT Standard SCREEN Installation instruction

Draper

Draper E Series Installation & operating instructions

Laarhoven

Laarhoven Companion II General assembly instructions

Renogy

Renogy RMS-LFPS-US manual

Da-Lite

Da-Lite ExecutiveElectrol Instruction book

Samsung

Samsung S*H65* user manual

FONESTAR

FONESTAR PPTR-43100-FA quick start guide

Slide Clear

Slide Clear Varro XL installation instructions

OS РХ-090Н user manual

Niko

Niko 10-845 Product information

Speaka Professional

Speaka Professional 2357532 Important information

Sima

Sima XL-72 instruction manual

Jasic

Jasic EVO 2.0 ET-200P Fitting instructions

InFocus

InFocus SC-WALL GRY-92H Instruction guide

Barco

Barco OverView MVL-615 Brochure & specs

Draper

Draper Envoy Installation & operating instructions

SI Dynamic 2 XL installation manual

Draper

Draper Nocturne+ E Installation & operation instructions