Electronics Tomorrow 964F110813 User manual
Instruction Manual
[For iPod, iPhone and iPad User]
BLE Alarm Clock
Main Unit
Location of Control
1. Snooze button
2. Alarm
3. Pair
4. Scroll
5. Reset
6. Battery
Compartment
7. Battery door
1
2
3 4
7
65
FCC ID: PEQ964F110813
Electronics Tomorrow Ltd.
Model No: 964F
DC 3V 2 X 1.5V - - -
MADE IN CHINA
Features
Thank you for purchasing the BLE Alarm Clock. This
product is designed as a Ble Alarm Clock by working with
your iPad, iPhone, iPod or other iOS devices.
- Support iOS version 7 or above;
- Support Bluetooth version 4.0.
- Set wake up buzzer alarm with snooze function, up to 5
alarms.
- Take full control of the BLE Alarm Clock with idevice app
via Bluetooth Low Energy.
- Selectable alarm tone pattern and volume to different
alarms.
- Temperature and Humidity reading and history chart
- Set count down timer.
- Monitor the battery status of the BLE Alarm Clock and
have battery warning if it is at low level.
Before you start using it
• Please make sure to read the instruction manual
carefully.
• Following and respecting the instuctions in your
manual will prevent damage to your instrument and
loss of your statutory rights arising from defects due
to incorrect use.
• We shall not be liable for any damage occuring as a
result of non-following of these instructions. Likewise,
we take no responsibility for any incorrect readings
and for any consequences which may result from
them.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future
reference.
Getting started
1. Install battery
1.1 Open the battery compartment.
1.2 Insert 2 x AA batteries in polarity (+) and
(-) as indicated.
1.3 Close the battery compartment.
2. Install BleAlarm App on your idevice.
2.1 Access app store and search for BleAlarm .
2.2 Select and install BleAlarm App on your
idevice.
BLE
ALARM
Pairing the BLE Alarm Clock
3. Pair the BLE Alarm Clock with BleAlarm app.
3.1 Before running the BleAlarm app, make sure the
Bluetooth is turned ON at your i-device.
3.2 After you tap the app icon , the ‘Nearby Devices’
screen appears. You need to pair the BLE Alarm Clock
device before you enter the main app screen.
BLE
ALARM
Pairing the BLE Alarm Clock
3.3 Tap “ Pair New Device”
to search for nearby
devices.
3.4 Press and hold the [PAIR]
button on the BLE Alarm
Clock device for 5 seconds.
You can find that the icon
start to blink.
3.5 The new BLE Alarm Clock
will be displayed on App
and is ready for pairing. Tap
the "BLE Alarm Clock" will
start the pairing and
connection process. Once
the BLE Alarm Clock is
paired, it will start time and
data synchronization.
BLE Alarm Clock
Pairing the BLE Alarm Clock
3.6 After the connection is made, the following information
will be synchronized:
i) Current time and date
ii) Alarms & timer setting
iii) Unit battery level
iv) Temperature and Humidity history
Pairing the BLE Alarm Clock
3.7 When the BLE Alarm Clock is paired with one i-device,
other i-devices cannot pair with it again.
3.8 One idevice can pair with maximum 5 BLE Alarm
clocks.
3.9 Bluetooth icon status description
No Bluetooth
connection
Bluetooth under
connection
Bluetooth connected
successfully
Rename the BLE Alarm Clock
4. Rename the device.
Tap the device name (default is “BLE Alarm Clock”) at
the top of the screen to edit the device name.
Battery status indicator
5. Battery status indicator
It indicates the battery level of your BLE Alarm Clock
device. While the battery level drops below 20%, the
battery icon is in red status and a low battery warning
will pop up for to remind battery replacement.
Meanwhile, low battery indicator icon will shown on the
alarm clock LCD.
Above 60%
Between
20% ~ 60%
Below 20%
Table of contents
Other Electronics Tomorrow Alarm Clock manuals
