Electrolux REX CA 962 ALU User manual

Cappa Aspirante

Cooker hood

CA 962 ALU

Contenuti - Contenents

Generalità .................................................. 4

General Data .............................................. 13

Componenti ............................................... 4

Components ............................................... 13

Avvertenze per la Sicurezza ...................... 4

Safety Warnings ......................................... 13

Installazione ............................................... 5

Installation ................................................. 14

• Scelta del tipo di installazione

• Selecting the type of installation

• Installazione del corpo cappa C

• Installation of the hood canopy C

• Installazione del camino

• Installation of the chimney

• Connessione spirante o Filtrante

• Ducting or recirculation fitting

• Connessione Elettrica e Controllo Funzionale

• Connection to power supply and checking of good

working order

Contenuti - Contenents

Avvertenze per la Sicurezza .................... 11

Safety Warnings ....................................... 20

Uso ............................................................ 11

Operation .................................................. 20

Manutenzione ........................................... 11

Maintenance ............................................. 20

• Filtri antigrasso metallici

• Metal antigrease filters

• Filtri al carbone attivo

• ctivated carbon filters

• Illuminazione

• Light

• Pulizia

• Cleaning

Part 1 - INSTALLATION INSTRUCTIONS

1 -GENERAL DATA

This hood has been designed to be wall-mounted abo e a cooking hob with one side

resting against a wall. It works either by suction (external outlet) or filter (internal

recycling). Be ause of the omplexity and weight of the hood, its installation

should be arried out by qualified staff, taking are to respe t all lo al

regulations on air dis harge. The manufa turer annot be found liable for any

damage due to improper installation.

2 - COMPONENTS

The cooker hood is made up of the following components (fig. 1):

2.1 - No. 1 canopy C complete

with controls and worktop

illumination;

2.2 - No. 1 telescopic chimney

stack A complete with

ducting fan unit;

2.3 - No. 1 flange Ø 120 or Ø 150

2.4 - No. 1 enting grill G;

2.5 - No. 1 ducting spigot R;

2.6 - No. 1 support rod B;

2.7 - No. 1 fixing kit containing:

No. 1 wall bracket S to fix

the canopy hood;

No. 1 co er D, screws, rawl plugs and documentation.

3 -SAFETY WARNINGS

3.1 - When used in the extra tion mode the ooker hood du ting must not be onne ted to

a flue whi h is used for exhausting fumes from applian es supplied with energy other

than ele tri su h as a entral heating flue or water heating flue.

3.2 - Before onne ting to the mains supply ensure that the mains voltage orresponds with

the voltage on the rating plate inside the hood.

3.3 - Conne t the ooker hood to the mains via a double pole swit h whi h has 3 mm

learan e between the onta ts.

3.4 - The applian e must be earthed.

3.5 - When installed, the hood must be positioned at least 65 m above a ooking applian e.

3.6 - Never do flambé ooking under this ooker hood.

3.7 - Never leave frying pans unattended during use as overheated fats and oils may at h

fire.

S36_01

Part 1 - INSTALLATION INSTRUCTIONS

3.8 - Before arring out any kind of maintenan e or leaning, dis onne t the hood from the

mains supply.

3.9 - If the room where the ooker hood is to be used ontains a fuel burning applian e su h

as a entral heating boiler then this must be of the room sealed or balan ed flue type.

If other types of flue or applian e are fitted ensure that there is an adequate supply of

air into the room. When the ooker hood is used in onjun tion with other applian es

supplied with energy other than ele tri , the negative pressure in the room

must not ex eed 0,04 mbar to prevent fumes being drawn ba k into the room by the

ooker hood.

4 - INSTALLATION

The ersatility of the ducting fan unit on this hood enables it to be installed in one of

four different ways:

1 - Air outlet directed upwards (ducting or recirculation fitting).

2 - Air outlet directed towards the wall (ducting fitting only).

3 - Air outlet directed to the right or left (ducting fitting only). For correct installation of

the hood, please proceed in the following stages:

4.1 - Selection of the type of installation

4.2 - Installation of the hood canopy C

4.3 - Installation of the chimney A

4.4 - Ducting or recirculation fitting

4.5 - Electrical connection and testing

4.1 - Selecting the type of

installation

1 - Air discharge towards the top

In this case the hood can be used

either in filter mode (fig. 2a) or in

suction mode (fig. 2b).

2 - Air discharge towards the wall

(fig. 3)

In this case the hood can only be

used in suction mode.

3 - Side air discharge, Lh or Rh (fig.

4a-b).

In this case the hood can only be used in suction mode.

2a 2b

S07_02

4a 4b

S07_04

R R

S07_03

Part 1 - INSTALLATION INSTRUCTIONS

4.2 - Installation of the hood canopy C

1 - Drilling the wall

a) Using the cardboard template pro ided, mark on the wall the centres of holes 1 for

fixing of the hood canopy C. The centre of hole 2 for fixing the chimney, (fig. 5a) air

outlet directed upwards or towards the wall, (fig. 5b- ) air outlet to the right or left

hand side, must be marked at a distance X from the line between holes 1, obtained

by measuring the extension Z of the chimney required for installation, plus 18 mm

X=Z+25-7. Using a Ø8 mm drill bit, drill the points marked in this way.

b) When installed with the air outlet directed towards the wall (fig. 5a), it will be necessary

to drill an air ducting opening,

measuring Ø120 or 150 mm,

according to the diameter of the

flange F pro ided.

2 - Fitting the fixing elements

a) Insert the rawl plugs pro ided

into holes 1 and 2.

b) Fit the eye bolts O (fig. 6).

c) Fix the wall bracket S in hole 2 using the screw V pro ided (fig. 7).

ø120

ø150

100 100 ø8

650

105 105

S36_05

1 1

5a 5b 5c

A08_06

L = 44 mm

A08_07

Part 1 - INSTALLATION INSTRUCTIONS

3 - Fitting the hood canopy C to the wall

a) Remo e the lower grill and the acti e

charcoal filter if present (see paragraph

on maintenance).

b) Fit the support rod B using the two

screws K (3,5x9,5) pro ided (fig. 8).

c) Hook the hood canopy C to the eye

bolts O fixed in holes 1 (fig. 9).

d) Adjust the support rod B so that it

pushes against the wall (fig. 10).

e) Adjusting position (fig. 11). There are

two adjustable hooks at the rear of the

hood, which can be used to adjust its

position as follows:

- Turn the screws L until the

position of screws N

coincides with the lower

access holes.

- Turn the screws N to adjust

the ertical and horizontal

position of the hood.

- Lock the screws L to fasten the hood against the wall.

- Insert the plugs T pro ided in the holes gi ing access to screws N.

4.3 - Installation of the chimney A

No matter which type of installation is being used, any wooden shel es in the area

where the hood is to be fitted must first be remo ed, drilled and later replaced.

A08_08

S36_09

A08_11

S36_10

Part 1 - INSTALLATION INSTRUCTIONS

1 - Drilling the shel es:

a) Using the cardboard template

pro ided, and taking hole “B” as

a point of reference, drill the

shel es along the central axis to

allow the passage of the chimney.

The chimney must be inserted into

the shel es before it is fixed to the

hood canopy C (fig. 12).

b)When installing the ducting

ersion with the air outlet directed

upwards, if the ducting fan unit is

positioned below the line of

shel es it will be necessary to drill

a suitable hole in the top shelf only,

to allow the air ducting pipe to pass

through (fig. 13).

2 - Direction and position of the

ducting fan unit

a) The hood is normally supplied with

the air outlet directed towards the

wall (fig. 3), if it is to be installed with the air outlet directed

to the right or left (fig. 4a-b), it will be necessary to change

the direction of the ducting fan unit, proceeding as follows:

- Unscrew the screws U (fig. 14);

- Turn the ducting fan unit 60° to the right or left;

- Replace the screws U.

b) The ducting fan unit air outlets must be arranged

according to the type of installation to be carried out.

· Air outlet directed upwards (fig. 2a-b).

- Remo e the plastic plug from the upper part of the enting

grill and replace it on the rear part (fig. 15).

· Air outlet directed towards the wall (fig. 3).

- Remo e the plastic frame from the air outlet (fig. 16).

S36_13

S36_12

S07_22

S07_14

A08_14

Part 1 - INSTALLATION INSTRUCTIONS

- Remo e the plug from the upper part of the ducting fan unit

(fig. 17), as it is not possible to insert the flange F with the

plug in place.

- Fit the flange F Ø120 or 150 mm (fig. 18), replace the plug.

· Air outlet directed to the right or left hand side (fig. 4a-b).

- Remo e the four screws fastening the plastic frame, as shown

in fig. 16.

- Fit the ducting spigot R (fig. 19) and replace the four screws

remo ed as abo e.

3 - Fixing the chimney

a) Loosen the screws M fixing the two parts

of the chimney and pull the inner section I

(fig. 20) almost all the way out. Remo e

the protecti e film P.

b) Rest the lower section of the chimney in its housing on

the top of the hood canopy. Lower the ducting fan unit

until it reaches the wall bracket S and fix it using the

screw H pro ided (fig. 21). Fit the co er D (pro ided)

on the wall bracket S (fig. 22).

c) Fix the chimney A to the hood canopy C using the four

screws pro ided (fig. 23).

d) Insert the transparent seal Q (pro ided), so as to elimi-

nate any play between the two parts of the chimney

(fig. 24). Lock the screws M.

e) Remo e the support rod B.

S07_16

S07_19

A08_20

A08_21

A08_22

A08_23

A08_24

Part 1 - INSTALLATION INSTRUCTIONS

4.4 - Ducting or recirculation fitting

1 - Ducting fitting.

This is possible for all forms of installation:

a) Connect the air outlet to the external ducting system.

b) Remo e the acti ated charcoal filter (if there is one) inside the

hood canopy (see Maintenance).

2 - Recirculation fitting

This is only possible with the air outlet directed upwards. Fit the

enting grille G onto the air outlet (Fig. 25). The acti ated charcoal

filter should be fitted inside the hood canopy after connection to

the power supply.

4.5 - Connection to power supply and checking of good

working order

1 - It is absolutely necessary to follow the warnings 3.2, 3.3 and 3.4 of paragraph 3,

concerning safety measures.

2 - Loosen the two locking screws and remo e the metal co er (fig.26).

Connect the hood connection to the engine connection (fig.27a). Correctly place the

connectors under the co er and tighten the two locking screws (fig. 27b).

3 - Once electrical connection has been carried out, check that lights, engine and change

of speed work

4 - Fit the lower grill and the acti ated carbon filter (only for filter mode) (see Maintenance).

27b S36_27

27a

S07_23

S36_26

Table of contents

Other Electrolux Ventilation Hood manuals

Electrolux

Electrolux EFP90540OX User manual

Electrolux

Electrolux EFP 662 Specification sheet

Electrolux

Electrolux CH120 User manual

Electrolux

Electrolux EFT60001 User manual

Electrolux

Electrolux EFT739X User manual

Electrolux

Electrolux EFG5530 User manual

Electrolux

Electrolux EFC 9440 User manual

Electrolux

Electrolux EFV90673OK User manual

Electrolux

Electrolux EFP129X User manual

Electrolux

Electrolux LFP616X User manual

Electrolux

Electrolux EFP 6446 User manual

Electrolux

Electrolux EFA 9673 User manual

Electrolux

Electrolux EFC60420 User manual

Electrolux

Electrolux Icon E36WC45FSS User manual

Electrolux

Electrolux EFC 1540 User manual

Electrolux

Electrolux EFP 629 User manual

Electrolux

Electrolux ICON E30WV60EPS User manual

Electrolux

Electrolux DGB3850M User manual

Electrolux

Electrolux IHGL1062CN User manual

Electrolux

Electrolux EECH6001S User guide

Electrolux

Electrolux LFC316X User manual

Electrolux

Electrolux EFL50555OX User manual

Electrolux

Electrolux EFC 9416 User manual

Electrolux

Electrolux EI30DD10KS Service manual

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual