Electrolux EFCI 90542 User manual

EFCI

90542

Instructions Manual

Manual de instrucciones

Manual de Instruções

Instructions Manual

INDEX

RECOMMENDATIONS AND SUGGESTIONS......................................................................................................................5

CHARACTERISTICS..............................................................................................................................................................6

INSTALLATION......................................................................................................................................................................8

USE.......................................................................................................................................................................................12

MAINTENANCE....................................................................................................................................................................14

Manual de instrucciones

ÍNDICE

CONSEJOS Y SUGERENCIAS...........................................................................................................................................16

CARACTERÍSTICAS............................................................................................................................................................17

INSTALACIÓN......................................................................................................................................................................19

USO......................................................................................................................................................................................23

MANTENIMIENTO................................................................................................................................................................25

Manual de Instruções

ÍNDICE

CONSELHOS E SUGESTÕES............................................................................................................................................27

CARACTERÍSTICAS............................................................................................................................................................28

INSTALAÇÃO.......................................................................................................................................................................30

UTILIZAÇÃO.........................................................................................................................................................................34

MANUTENÇÃO....................................................................................................................................................................36

RECOMMENDATIONS AND SUGGESTIONS

INSTALLATION

• The manufacturer will not be held liable for any damages resulting

from incorrect or improper installation.

• The minimum safety distance between the cooker top and the extrac-

tor hood is 650 mm.

• Check that the mains voltage corresponds to that indicated on the

rating plate fixed to the inside of the hood.

• For Class I appliances, check that the domestic power supply guaran-

tees adequate earthing.

Connect the extractor to the exhaust flue through a pipe of minimum

diameter 120 mm. The route of the flue must be as short as possible.

• Do not connect the extractor hood to exhaust ducts carrying combus-

tion fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-electrical appliances

(e.g. gas burning appliances), a sufficient degree of aeration must be

guaranteed in the room in order to prevent the backflow of exhaust

gas. The kitchen must have an opening communicating directly with

the open air in order to guarantee the entry of clean air.

USE

• The extractor hood has been designed exclusively for domestic use to

eliminate kitchen smells.

• Never use the hood for purposes other than for which it has ben de-

signed.

• Never leave high naked flames under the hood when it is in operation.

• Adjust the flame intensity to direct it onto the bottom of the pan only,

making sure that it does not engulf the sides.

• Deep fat fryers must be continuously monitored during use: over-

heated oil can burst into flames.

• Do not flambè under the range hood; risk of fire

• The hood should not be used by children or persons not instructed in

its correct use.

MAINTENANCE

• Switch off or unplug the appliance from the mains supply before carry-

ing out any maintenance work.

• Clean and/or replace the Filters after the specified time period.

• Clean the hood using a damp cloth and a neutral liquid detergent.

650 mm min.

CHARACTERISTICS

Dimensions

650 min.

650

290

150

350

700

Min 810

Max

1050

Components

Ref. Q.ty Product Components

1 1 Hood Canopy complete with: Controls, Lights, Filters

21 Telescopic chimney made up of:

2.1 1 Upper chimney

2.2 1 Lower chimney

7.1 1 Telescopic frame complete with Suction fan, made up

of:

7.1a 1 Upper frame

7.1b 1 Lower frame

91 Reduction flange ø 150-120 mm

10 1 Flange ø 150

15 1 Air Outlet Connector

24 1 Connectionbox

25 2 Hose clamps

26 2 Cable clamps

27 1 Finishing plug

Ref. Q.ty Installation Components

11 4 Wall plugs ø 10

12c 6 Screws 2.9 x6.5

12e 3 Screws 2,9 x9,5

12f 4 ScrewsM6 x10

12g 4 Screws M6 x 80

12h 4 Screws 5,2 x70

21 1 Boring template

22 4 Washers øi 6.4

23 4 Nuts M6

Q.ty Documentation

1Instruction booklet

12c

7.1a

7.1

12h

7.1b

2.1

2.2

12c

12g

12f

12e

12c

INSTALLATION

Drilling the Ceiling/shelf and fixing the frame

DRILLING THE CEILING/SHELF

• Use a plumb line to mark the centre of the hob on the ceiling/support shelf.

• Place the drilling template 21 provided on the ceiling/support shelf, making sure that the

template is in the correct position by lining up the axes of the template with those of the hob.

• Mark the centres of the holes in the template.

• Drill the holes at the points marked:

• For concrete ceilings, drill for plugs appropriate to the screw size.

• For hollow brick ceilings with wall thickness of 20 mm: drill ø 10 mm(immediately insert

the Dowels 11 supplied).

• For wooden beam ceilings, drill according to the wood screws used.

• For wooden shelf, drill ø 7 mm.

• For the power supply cable feed, drill ø 10 mm.

• For the air outlet (Ducted Version), drill according to the diameter of the external air ex-

haust duct connection.

• Insert two screws of the following type, crossing them and leaving 4-5 mm from the ceiling:

• For concrete ceilings, use the appropriate plugs for the screw size (not provided).

• for Cavity ceiling with inner space, with wall thickness of approx. 20 mm, Screws 12h,

supplied.

• For wooden beam ceilings, use 4 wood screws (not provided).

• For wooden shelf, use 4 screws 12g with washers 22 and nuts 23, provided.

FIXING THE frame

• Loosen the two screws fastening the lower chimney and re-

move this from the lower frame.

• Loosen the two screws fastening the upper chimney and re-

move this from the upper frame.

If you wish to adjust the height of the frame, proceed as follows:

• Unfasten the eight metric screws joining the two columns, lo-

cated at the sides of the frame.

• Adjust the frame to the height required, then replace all the

screws removed as above.

• Insert the upper chimney stack from above, and leave it run-

ning free on the frame.

• Lift up the frame, fit the frame slots onto the screws up to the

slot end positions.

• Tighten the two screws and fasten the other two screws pro-

vided with the hood.

Before tightening the screws completely it is possible to adjust

the frame by turning it. Make sure that the screws do not come

out of their seats in the slotted holes.

• The frame mountings must be secure to withstand the weight

of the hood and any stresses caused by the occasional side

thrust applied to the device.

On completion, check that the base is stable, even if the frame

is subjected to bending.

• In all cases where the ceiling is not strong enough at the sus-

pension point, the installer must provide strengthening using

suitable plates and backing pieces anchored to the structurally

sound parts.

Ducted version air exhaust system Connection

When installing the ducted version, connect the hood to the

chimney using either a flexible or rigid pipe ø 150 or 120 mm,

the choice of which is left to the installer.

• To install a ø 120 mm air exhaust connection, insert the re-

ducer flange 9on the hood body outlet.

• Fix the pipe using the pipe clamps 25 provided.

• Remove any activated charcoal filters.

ø 150 ø 120

Recirculation version air outlet

• Fix the connection 15 to the frame using the 4 screws pro-

vided.

• Fix the flange 10 to the lower opening of the connection 15.

• Connect the hood air outlet to the flange in the lower part of

the junction using a rigid or flexible ø 150 tube (by installer’s

choice).

Flue assembly - Mounting the hood body

• Position the upper chimney section and fix the upper part to the

frame using the 2 screws 12c (2,9 x 6,5) provided.

• Similarly, position the lower chimney section and fix the

lower part to the frame using the 2 screws 12c (2,9 x 6,5) pro-

vided.

Before fixing the hood body to the frame:

• Remove the grease filters from the hood body.

• Remove any activated charcoal filters.

• From below, use the 4 screws 12f (M6 x 10)provided to fix the

hood body to the frame.

12f

12c

Table of contents

Other Electrolux Ventilation Hood manuals

Electrolux

Electrolux EFC 9440X User manual

Electrolux

Electrolux EFC60441OR User manual

Electrolux

Electrolux EFA 9673 - 90673 User manual

Electrolux

Electrolux LFG427W User manual

Electrolux

Electrolux EFP90540OX User manual

Electrolux

Electrolux Juno JDA 5330 Technical manual

Electrolux

Electrolux DBE6980HM User manual

Electrolux

Electrolux EFP 6456 User manual

Electrolux

Electrolux EFG 520 User manual

Electrolux

Electrolux EFR90571OX User manual

Electrolux

Electrolux EFP 629 User manual

Electrolux

Electrolux Husqvarna QFC 60350 User manual

Electrolux

Electrolux EFT 601-2 User manual

Electrolux

Electrolux EFC 950 Assembly instructions

Electrolux

Electrolux IHPL1240WE User manual

Electrolux

Electrolux 7332543810222 User manual

Electrolux

Electrolux IHL9028CN User manual

Electrolux

Electrolux EFC 635 X User manual

Electrolux

Electrolux EFP 60466 User manual

Electrolux

Electrolux SL series Operating instructions

Electrolux

Electrolux EFC 980 User manual

Electrolux

Electrolux EFT 5436 User manual

Electrolux

Electrolux EI30HI55KS User manual

Electrolux

Electrolux EFA 90540 User manual

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual