Electrolux IC43316 User manual
01103040/US
09.15
Operating handbook
Flatwork ironers
IC43316 – IC43320
USA
.
00409 0
00
01103040
Page
Notice Date
OPERATING
HANDBOOK Table of contents
Pages/Chapters
General operating
Precaution for use ...............................................................................................1/1
General
Identification plate................................................................................................2/2
Method of use
Control console....................................................................................................1/3
Starting machine..................................................................................................2/3
Stopping machine................................................................................................3/3
Additional instructions..........................................................................................4/3
Precautions for use..............................................................................................6/3
Using the handle..................................................................................................8/3
Safety
Locking and tagging procedure ...........................................................................3/4
Safety devices .....................................................................................................4/4
Operating incidents
The linen remains stuck to the cylinder ...............................................................1/5
When the linen comes off the dryer-ironer it is not dry ........................................1/5
The heating does not work or works badly ..........................................................2/5
The machine temperature drops .........................................................................3/5
The machine stops suddenly...............................................................................3/5
Additional instructions..........................................................................................4/5
Maintenance
Preventive maintenance ......................................................................................1/6
Replacing ironing bands ......................................................................................5/6
Appendices
Explanation of graphic symbols...........................................................................1/7
Explanation of washing symbols .........................................................................2/7
Conversion of measurement units.......................................................................3/7
Lubrification table ................................................................................................4/7
The manufacturer reserves the right to modify construction and equipment characteristics.
0409 1 1
11
01103040
PageNotice Date
OPERATING
HANDBOOK
1. General operating
Precaution for use
• The machine should not be used by children.
• This ironer must be used exclusively for textiles appropriate for machine ironing, which
have been previously and exclusively washed in water.
• Blankets should not be ironed.
• Be careful with synthetic linen and also with printed linen. They can melt and stick on the
cylinder.
• Do not iron articles that contain plastic, foam, sponge rubber or similarly textured rubber-
like materials.
• Do not iron linens coated with solvent, paint, wax, grease or any easily inflammable pro-
ducts.
10409 2
01103040
Page
Notice Date
OPERATING
HANDBOOK
Before any use, it is compulsory to read the instruction handbook.
Users must have learnt how to the machine operates.
The identification plate is situated on the left side.
This machine should be installed in conformance to the health and safety regula-
tions, and only used in a sufficiently aerated area.
Check the instructions before installing or using the machine.
In the machine you should have found a set of instructions and a servicing poster to display
in your laundry.
You must have found with this handbook, a crank for the manual drive of the cylinder.
Depending on its destination, the dryer ironer is delivered bare or may be placed on a trans-
port pallet and/or packed with plastic film.
In some cases, it may be delivered in maritime packing (wood crate).
Please refer to the handling chapter in this instruction handbook for a description of handling
operations.
2. General
2
0409 2
D1435
xxxxxxx
USA/CANADA
Manufacturer’s address:
ELECTROLUX LAUNDRY SYSTEMS France
52 rue Pasteur BP6
10430 Rosières Près Troyes - France
Model
IC433..
Orifice size: Nat 2.3 mm (x3)
Propane 1.3 mm (x3)
Serial No
...../........
MFG. Date
../../....
QC No
........
Gas Type: NAT □
Propane □
Conforms to: - UL 141 : 2007
- UL 795: 2006
- CGA 7.3 : 1971
- NFPA 79 : 2002
Heat Input Nat gas:
68240 BTU/hour
(C.V 34,02 MJ/m³)
Gas Supply Pressure: Nat: 8.0 w.c, 2.0 kPa
Manifold Pressure: Nat: 4.49 w.c, 1.12 kPa
Heat Input Propane gas:
68240 BTU/hour
(C.V 46,34 MJ/kg)
Gas Supply Pressure: Propane: 14.9 w.c,
3.7 kPa
Manifold Pressure: Propane: 14 w.c, 3.5 kPa
Electrical rating: Volts 120 Total input Amp: 5.5 A
Hertz 60 Fuse size: 12 A
Phase 1
WARNING: Improper installation, adjustment, alte-
ration, service or maintenance can cause property
damage, injury or death. Read the installation,
operating and maintenance instructions thoroughly
before installing or service this equipment. For safety
reasons use only original spare parts.
ATTENTION : L’installation, le réglage, la mainte-
nance, ou l’entretien inapropriés peuvent causer des
dégats matériels, des blessures ou la mort. Lisez
complètement les notices d’installation, d’utilisation et
d’entretien avant d’installer, d’utiliser ou d’entretenir
cet équipement. Pour des raisons de sécurité, utiliser
uniquement des pièces de rechange d’origine.
01103040
PageNotice Date
OPERATING
HANDBOOK
The machines described in this handbook have an ironing capacity of 1.650 m (65") or 2.065
m (811/3") wide according to their type.
The ironing speed can be adjusted according to the linen texture and its degree of moisture.
The temperature of the ironing cylinder can also be adjusted by a thermostat.
The parameters are displayed by a control panel.
2. General
Identification
plate
Adjustment label
(for gas machine only)
Identification plate
2
0409 3
01103040
Page
Notice Date
OPERATING
HANDBOOK 2. General
This page is left blank on purpose.
0409 13
1
2
4
56
7
8
9
10
3
HONEYWELL DC1010
PV
SP
AL2
OUT2
AL1
PRO
OUT1
AT
SET
D1323
3
2
18
45
6
7
01103040
PageNotice Date
OPERATING
HANDBOOK
3. Method of use
Control consol
1. "Voltage" indicator
2. "Stop" switch
3. "On" switch
4. "Ironing speed adjustment" potentiometer
5. "Ironing temperature selection" thermostat
6. "Heating" indicator on
7. Gas heating "Ignitor failure" indicator
8. "On / Off" heating switch with "On" indicator
0409 2 3
01103040
Page
Notice Date
OPERATING
HANDBOOK 3. Method of use
Starting machine
Turn main section switch to I (ON), the indicator (1) "voltage" lights".
Turn the potentiometer (4) to the minimum speed.
Adjust thermostat (5) on required temperature. Usual ironing temperature is around
180 °C (355 °F) for cotton.
Press button (3) "On".
The cylinder and the guiding bands rotate.
The fan works and draws the air out of the machine to outside the building.
Press switch (8) "heating on", the key indicator lights. The heating indicator (6) lights.
The temperature rise is reached after approximately 12 min for a temperature of 180
°C (355 °F). The heating indicator (6) switches off as soon as the required ironing tem-
perature is reached.
Check that the finger protection is working. The finger protection must stop the ma-
chine when it is touched.
Press button (3) "On" to restart the machine.
Adjust potentiometer (4) on an average speed and start ironing.
Ajust the ironing speed depending on the textile processed and the moisture rate of
the linen.
If the pipe burner is secured, the indicator (6) switches off and the indicator (7) lights ;
(to restart the machine, press "STOP HEATING" and then "HEATING ON" (8).
•
•
•
•
•
•
•
•
•
0409 33
01103040
PageNotice Date
OPERATING
HANDBOOK
Stopping machine
In order to extend the lifetime of your machine and its components, observe the fol-
lowing instructions to stop the heating.
Press switch (6) "Heating stop", its indicator switches off. The "Heating" indicator (8)
switches off too.
Continue to feed in damp laundry until the temperature falls to 120°C (248°F).
Turn the general switch situated on the left casing to O (off).
CAREFUL : At any time, it is possible to stop the machine by pressing key (2) "General
stop", a high temperature of the ironing cylinder may damage the ironing strips.
•
•
•
•
3. Method of use
This manual suits for next models
1
Table of contents
Other Electrolux Laundry Appliance manuals
