Electro-Voice R300 User manual

R300 UHF Wireless MicropHone

USER GUIDE

EZsync ClearScan

Electro-Voice

300

SET

SYNC

TAB LE oF contents

1. Quick System Setup

 •Receiver.................................................................................................................4

 •Transmitter.............................................................................................................5

 •SystemsOperation..............................................................................................6

2.DetailedComponentDescriptions

 •Receiver.......................................................................................................... 7-14

 •HandheldTransmitter .................................................................................15-16

 •BodypackTransmitter................................................................................. 17-19

3.GuidelinesForBestPerformance.............................................................................20-21

4.TroubleshootingGuide................................................................................................22-23

5.Specications ...............................................................................................................24-25

6.Certications....................................................................................................................... 26

7. ServiceandWarranty ........................................................................................................ 27

8.ComponentsandAccessories........................................................................................ 28

9.AppendixACompatibleChannelGroups...............................................................29-31

01QUICK SETUP: receiver

1.Donotconnectthereceivertoanyotherequipmentyet!

2.ConnectthetwoAntennastothereceiver.

3.Installthebladesintothepowersupply,plugitintothebackofthereceiver,

andintoanoutlet.

4.PressthePOWERswitch.Displaywilllightup.

5.Pressandholdthe buttonuntilCLEARSCANscrollsacrossthescreen.

6.WhenCLEARSCANstops,thereceiverwillbesettotheclearestchannel.

7.Turnthereceiveroffandconnectthemixerorotheraudiosystemtothereceiver

XLRConnectororthe¼inchLineLevelJack.

8.Settheaudiomixerorothersysteminputleveltominimum.

9.PressthePowerswitchbuttoninagain.

Receiver “Quick Set-up” is complete.

QUICK SETUP: transMitter

1.WiththePowerswitchonthetransmitterOFF,installtwofreshAAbatteriesintothetransmitter.

2.PressthetransmitterPowerSwitchuntilthedisplaycomeson.

3.HoldthetransmitterwiththeEZsyncPortfacingthereceiver,aboutafoot(30cm)away.

4.PresstheSYNCButtononthereceiver,SYNCwillshowinthedisplay.

5.Oncethechannelissetinthetransmitter,thedisplaywillswitchtothemain

displayandshowRFandAudioLevels.

Transmitter “Quick Set-up” is complete.

R300

EZsync Clear

SYNC

EZsync

R300 ClearScan

SET

QUICK SETUP: systeMs operation

1.Setthemixer/ampgain.

2.Talkorsingintothemicrophoneorplaytheguitaratanormalvolume.You

shouldhearaudiocomingoutofthesystem.

3.Youmayhavetoadjustthegain(viathecontrolnexttotheconnectoronthe

receiverbackpanel)toprovidethebestinputvolumeforyourmixer/amp.

“Quick Set-up” is now complete. Please enjoy your R300 system.

SYNC

R300

EZsync Clear

SET

EZsync ClearScan

Electro-Voice

300

ANTENNA B ANTENNA A12V .500mA

MIN MAX

VOLUME

LEVEL

-10dB 0dB

BALANCED OUT UNBALANCED OUT

DETAILED coMponent descriptions

2.1 |R300 Receiver

RECEIVER CONTROLS, CONNECTORS

1.PowerON/OFF

2.SYNCDataTransferButton

3.InfraredEZsyncWindow

4.GraphicalDisplay

 a.ChannelorFrequencyDisplay

 b.DiversityIndicator

 c.RFStrengthMeter

 d.AudioLevelMeter

 e.LockIndicator

 f.SquelchLevelIndicator

5.ScrollDownandUp( and )ControlButtons

6.SETControlButton

7.ClearScanControl(pressandhold button)

8.TNCAntennaInputConnectors(2)

9.BalancedOutputVolumeControl

10.XLRBalancedOutputConnector

11.¼InchUnbalancedLineLevelAudioOutputConnector

12.UnbalancedOutputLevelSwitch(-10dBor0dB)

13.DCPowerConnector(12VDC,500mA)

14.PowerCordRetainer

8 89 10 11 12 13 14

DETAILED coMponent descriptions

2.1 |Receiver Setup & Operation

1.Placethereceiverandantennaswherethereisaclearlineofsighttotheareawherethetransmitter

willbeused.Rotatetheantennastoseparatethemby90degrees.

2. Install the appropriate power connection blades into the power supply and connect the

power supplycordtothereceiver.PlugthepowersupplyintoanACoutlet.Pushthepower

buttontoturnthereceiveronandconrmthatitisonbycheckingthemaindisplayscreen.

3. Manual Channel Change

  a.The and buttonsallowyoutoscrollthroughtheChannels.WhentheChannel

youdesireisdisplayed,stopscrolling.

  b.After2secondsthedisplayedchannelnumberwillstarttoash.

  c.Thenumberwillstopashingandthenewchannelisinstalled.

  d.TurnonthetransmitterandholdtheEZsyncportfacingthereceiverEZSyncport,

aboutafoot(50cm)away.

ANTENNA B ANTENNA A12V .500mA

MIN MAX

VOLUME

LEVEL

-10dB 0dB

BALANCED OUT UNBALANCED OUT

e.PresstheSYNCbuttononthereceivertotransferthechannelinformation.

f.ThereceiverwilldisplaySYNCuntilthedataistransferred,thenreturntothemainscreen.

g.Thetransmitterdisplayscreenwillnowshowthenewchannelandfrequency.

h.Ifthechanneldatawasnottransferredtothetransmitterafter5seconds,thereceiver

willdisplayERROR.BecertainthatthetransmitterisOnandtheEZsyncportisfacingthereceiver

andtryagain.

i.Ifthedatastilldoesnottransfer,trynewbatteries,ormovetheunittoashadedareaawayfrom

directsunlightbeforetryingagain.

R300

EZsync Clear

SYNC

EZsync

R300 ClearScan

SET

R300

EZsync Clear

SYNC

EZsync

R300 ClearScan

SET

DETAILED coMponent descriptions

4. ClearScan: Thisfeatureautomatestheprocessofndingaclearchannel.

  a.Toscanfortheclearestchannelinagroup,pressandhold untilCLEARSCAN

appearsinthedisplay,thenreleasethebutton.

  b.Whenthescaniscomplete,thedisplaywillshowtheclearestavailablechannel.

  c.UsetheSYNCbuttontotransferthenewchannelasinstep3.

5.DuringsetupmakesurethemixeroramplierinputusedfortheR300ismutedor

turneddowntoaminimumlevel.

6.Pluganaudiocable(notsupplied)intothe3pinXLRor¼inchoutputoftheR300.

Note:TheXLRconnectoristhepreferredconnectionsincetheoutputisbalancedandwillbe

moreimmunetonoiseforlongerrunsofcablealthougheithercanbeusedwithgoodresults.

Setthebalancedoutputlevelonthebackpanelto12o’clock(midwayintherange)tostartand

adjustlaterifnecessary.Ifthe¼inchunbalancedoutputisused,startwithadjustmentswitchin

the-10dBsetting.

Other manuals for R300

Table of contents

Other Electro-Voice Microphone manuals

Electro-Voice

Electro-Voice PL77AA User manual

Electro-Voice

Electro-Voice N/D267 User manual

Electro-Voice

Electro-Voice Cobalt Co7 User manual

Electro-Voice

Electro-Voice PL68 User manual

Electro-Voice

Electro-Voice PL44 User manual

Electro-Voice

Electro-Voice RE90TX User manual

Electro-Voice

Electro-Voice RE98 User manual

Electro-Voice

Electro-Voice N/D767A User manual

Electro-Voice

Electro-Voice D056 User manual

Electro-Voice

Electro-Voice PL76 Mounting instructions

Electro-Voice

Electro-Voice HM1 User manual

Electro-Voice

Electro-Voice US690 User manual

Electro-Voice

Electro-Voice ND46 User manual

Electro-Voice

Electro-Voice R300-L User manual

Electro-Voice

Electro-Voice TR407 User manual

Electro-Voice

Electro-Voice 924 Dimension Guide

Electro-Voice

Electro-Voice 205CRA Dimension Guide

Electro-Voice

Electro-Voice N/DYM N/D767 User manual

Electro-Voice

Electro-Voice RE97S User manual

Electro-Voice

Electro-Voice RE920Tx User manual

Electro-Voice

Electro-Voice MC100 User manual

Electro-Voice

Electro-Voice 607 User manual

Electro-Voice

Electro-Voice RE90L User manual

Electro-Voice

Electro-Voice RE92L User manual

Popular Microphone manuals by other brands

IK Multimedia

IK Multimedia iRig Stream MIC PRO user manual

DAPAudio

DAPAudio RM-101 user manual

AKG

AKG CHM 21 User instructions

Sennheiser

Sennheiser evolution wireless series EM 100 instruction manual

Sony

Sony C-48 operating instructions

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG user manual

Shure

Shure WH30TQG user guide

auna PRO

auna PRO MIC-900 manual

AKG

AKG D 3800 User instructions

Shure

Shure KSM141 user guide

MAIIN SOUND

MAIIN SOUND IIN style instruction manual

Earthworks

Earthworks TC25 user manual

Sennheiser

Sennheiser evolution D1 user manual

Alesis

Alesis MicLink Wireless user guide

DSPPA

DSPPA D6234 manual

Monacor

Monacor IMG STAGELINE ECM-300B manual

Ansr Audio

Ansr Audio Scan16 user manual

Shure

Shure MXA710 Series user guide