ElectrIQ eiQ-C11E User manual
eiQ-C11E
Intelligent Robotic Vacuum Cleaner
USER MANUAL
Thank you for choosing electriQ
Please read this user manual before using this robotic vacuum cleaner
and keep it safe for future reference.
Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals
Contents
1. Safety instructions………………2-4
2. Product Parts……………………5-6
3.Building your Vacuum Cleaner… 7-8
4.Using your Vacuum cleaner……8-14
5. Looking after your
Vacuum Cleaner…………………14-18
6.Common Faults………………… 18-19
7.Technical Specifications……………19
1.1 Please read these instructions
1.2 Safety Precautions
1.3 Child Safety
1.4 About the Battery
1.5 Where can it be used?
2.1 Main Body and Accessories
2.2 Accessories Introduction
3.1 Main Body
3.2 Remote Control
3.3 Zone Divider
3.4 Charging Station
4.1 How to use the robot
4.2 Remote Control
4.3 Zone Divider
4.4 Charging Station
4.5 Charging Methods
5.1 Daily Storage
5.2 Cleaning the Main Body
5.3 Cleaning the Dust Box
5.4 Cleaning the Filter
5.5 Cleaning the Main Brush
5.6 Cleaning the Side Brush
5.7 Cleaning the Wheels
5.8 Cleaning the Left Wheel and Right Wheel
5.9 Cleaning the Sensors
5.10 Cleaning the Trailing Bar Assembly
6.1 Alarm and Prompt Facility
6.2 Processing Methods
- 01 -
We have provided instructions with this appliance so that you
will know how to use it safely.
The plug must be removed from the socket-outlet before
cleaning or maintaining the appliance.
This appliance can be used by children aged 8 years and
above people with reduced physical, sensory or mental
capabilities or persons who lack experience and knowledge
providing they have been given supervision or instruction
concerning use of the appliance in a safe way and understand
the hazards involved.
Do not let children play, clean or maintain the appliance without
supervision.
Only use this appliance with the power supply unit it came with.
Only use this appliance at home.
Warnings
1.2 Safety Precautions
Caution
- 02 -
1.Safety instructions
1.1 Use Notes
Please read and remember the following safety precautions:
* Read the instructions carefully; only use this product in line with this operating instructions.
* Keep the instructions in case you need to look up anything in the future.
* If you want to give the product to others, please give them the instructions to go with it.
* Using it wrongly could lead to injuring yourself or damaging the product.
Only use the original adaptor, battery and charging station
or else it will damage the machine, making fires more likely to
start through electric shocks or high voltages.
If you find that the main body and accessories are damaged, please do
not use the cleaner and contact the after-service department. No one is
allowed to disassemble or tamper with the machine.
Do not touch the battery socket and the machine when your hands are
wet as this will cause an electric shock.
Thanks for purchasing the intelligent vacuum cleaner
eIQ-C11E, we hope you enjoy using it!
Do not use the robot cleaner in areas such balconies or corridors without
handrail protection where risk of fall exists.
Do not place metal objects close to the negative ion function area or
it may cause electric shock.
Do not place any clothing or parts of your body (hair, fingers, etc.) into
the the main brush and wheels as it will cause personal injury.
比例1.000
- 03 -
Do not pull the machine by the power cord. Do not twist or bend the wire
or put anything heavy on it.
Do not put the machine near the fire, inflammable, explosive and
corrosive materials.
Attention
If you're not using the
machine, please turn off
the power or else it will
damage the battery.
Only use this machine
indoors.
Prevent water, oil and
other liquids from getting
into the machine.
If the machine is not used
for a long time, please
fully charge the battery,
take it out and put it
Do not leave any
electrical cables in the
way of a working robot
as it can damage them.
Place the charging station
and zone divider next to
a wall and on a flat
surface, otherwise it might
effect the performance quality of the machines.
Please remove all fragile
objects from the floor.
If the charging station doesn't
need to be used for a long
time, turn if off at the mains
socket and pull out the plug.
Do not cover the signal
window of the charging
station or else the
function of auto-charging
won't work properly.
The battery should be
charged for 12 hours if it
hasn't be used for a long
time or for the first time.
Use the cleaner for up to
3-4 charges for the best
battery efficiency.
Danger!
Electric shock.
OFF/ON
Please take down the two
protective pieces before
using, so the cleaner
can work efficiently.
Protective piece
Protective piece
1.5 Where can I use it?
*Do not use this machine outdoors.
*Do not use in extremely hot or cold environments.
*Do not use the robot cleaner in areas such balconies or corridors
without handrail protection where risk of fall exists.
*Do not use this machine in wet, flammable, explosive and corrosive
environments.
*Do not let the machine clean up flaming or flammable objects, such
as cigarette butts and matches.
*Do not use the robot on spilled toner from laser printers or copiers as
this will increase the risk of fire.
*Do not use the robot in areas with sharp glass or small metal objects
as those may damage it.
Wooden Floor Tiles Carpet
Applicable Range
Not Applicable Range
- 04 -
The cleaner is suitable in the following environments：
* Do not let children use the
vacuum cleaner by themselves.
* Packaging could cause
suffocation, so keep it away
from children.
1.3 Child Safety 1.4 About Battery
1. Only use the machine with the original battery.
2. Please turn off the power switch before taking out the
battery .
3. The battery must be taken out before disposing the robot.
4. If you want to replace the battery, please contact the
after-sale department. If the wrong battery is put into the
machine, it will lead to an accident.
5. If the battery is leaking, do not touch the liquid,
wipe
the liquid with dry cloth and put the battery straight into
a recycling bin or take to the nearest maintenance point.
Do not throw it away at random.
6. Please handle the old battery parts carefully.
The battery contains hazardous substances, so
dispose of it properly at your nearest recycling
centre, according to local environmental
protection regulations.
Intelligent Vacuum Cleaner
USER MANUAL
C11
A0
Thank you for purchasing the product.
Please read the manual carefully before using.
- 05 -
2. Product Parts
2.1 Main Body and Accessories
Remote Control
*1piece
Main Body
*1piece
* There is a side brush and a filter assembled in the main body and another side brush
and filter is inside.
* The trailing bar assembly includes a mop that can be used directly.
Tips:
Zone divider
*1piece
Charging Station
*1piece
Battery
*1piece
Trailing Bar Assembly
*1piece
Mop
*1piece
Screwdriver
*1piece
Filter
*2pieces
Side Brush
*3pieces
Clean Brush
*1piece
Power adaptor
*1piece
Instruction
*1piece
2.2 Accessories Introduction
Front View
Bottom View
Top Cover
Negative Ion
Function Area
Dust Box Button
Control Buttons
Display Screen
Ground
Detection
Sensors
Handle
Signal Window
Charging Electrodes
Trailing Bar Assembly
Trailing Bar Assembly Mop
Trailing Bar
Wall Detection Sensors
- 06 -
Front
Wheel
Battery Pack
Side Brush
Right Wheel
Left Wheel
Dust Box
Middle Rubber Brush
Middle Bristle Brush
Power Switch
Charging Jack
UV Lamp
Danger! Electric shock.
3.2 Remote Control
- 07 -
2.Put 2 AAA alkaline
batteries into the battery
slot, making sure to match
the positive and negative
signs on the battery to the
correct end of the battery slot.
1.Open the battery cover 3.Turn on the power switch after installing
the battery to check whether the remote
control can control the cleaner.
3.1 Main Body
3.Building your Vacuum Cleaner
OFF/ON
Please install the battery before using the cleaner!
Caution：
Red
White
Black
Insert the pin on the terminal
Unplug the pin when pressing
the snap joint
1. Loosen the screw a with screwdriver to unfold the battery cover.
2. Take out the connector between the battery and cleaner, join the two terminals and make sure the
relevant colours are in the right order and joining up to their matching colour on the other terminal.
Method to disassemble snap joint: Unplug the pin when pressing the snap joint.
3. Firstly, put the wire terminal buckle and wire into the battery pack gap according to the top right image.
Then put the battery into battery compartment. Finally, close the battery cover and lock screw.
4.1.1 Introduction to display
Display Interface
- 08 -
Menu Display
Control Button
Charging/Power display
Time/Error code display
Auto cleaning display
Spot cleaning display
Current week display
Malfunction display
3.3 Zone Divider
Power
Switch
Power
indicator
4. Put the zone divider
on a flat bit of floor and
against a wall as a barricade
from where you want to stop
the vacuum from going.
3.4 Charging Station
1. Put the charging station on
a flat floor and against the wall,
to make sure the vacuum can
get back to the station. Ensure
there are no obstacles or drops in the
floor for 3 metres in front and 0.5 metres
on the left and right of the charging station.
m
m
m
2. Insert the adaptor into the
power socket side and another
side in the charging station.
3. Do not cover the signal
window of the charging
station, otherwise the
auto-charging function
won't work.
1. Unfold the battery
cover
3. Turn on the power
switch, the power
indicator will flash.
2. Put 2 D alkaline batteries
into the battery slot, making
sure to match the positive
and negative signs on the
battery to the correct end of the battery slot.
Danger!
Electric shock.
4.1 How to use the robot
4.Using your Vacuum Cleaner
Press the button, the Cleaner will clean in the Auto Cleaning
mode; If you press this button for a long time whilst the vacuum
is in standby mode, it will turn itself off.
Press the button, the Cleaner will clean in the Spot Cleaning
mode.
Press the button, the Cleaner will goes into the Auto Charging
mode.
- 09 -
Setting up your Vacuum
1. Turn on the power switch on the robot cleaner then press the
You must set the current time before scheduling the robot to clean. Follow the steps below:
button. Then the screen
will flash and the robot will go into standby mode.
2. Press and hold button for at least three seconds, the robot will go to time setting and the
hour digits on the screen will flash .
3. Press button and the flashing number will increase each time you press cycling
back. To advance to next digit and move to minutes and eventually to day of the week by pressing
key. Follow this process to set up the two minute numbers to get the correct time. Once you
set up the correct cleaning start time press button, once to confirm the settings and the robot
will beep confirming schedule times are set.
4. After time scheduling is set and confirmed, press button again and the robot will goes into
the day of the week selection. The will flash on the screen.
5. press the button and the day of the week number will increase than cycle back to 0.You
can set up the correct day of the week. 0 stands for Sunday and 6 for Saturday.
6. After finishing the week settings press ,the screen will show then press
button again for at least three seconds to save the current week settings and resume normal
operation.
7. You can set the cleaning time for each week day, but the cleaning start time will be the same, and
you need to set the time day by day. You can also choose the day of the week the cleaning will be
initiated.
Notes:
Pressing button for 3 seconds will enable you to check and change the cleaning schedule
time. (When flashes, press button to cancel the cleaning schedule, press
button again and will recover theschedule.) Press button for at least 3 seconds and will return
the robot normal operation.
Setting the current time
Scheduling the cleaning time
1. Turn on the power switch of the robot cleaner then press the button. Then the screen will
flash and the robot will go into standby mode.
2. Press and hold button for at least three seconds, the robot will go to time setting and the
hour digits on the screen will flash .
3. Press button and the flashing number will increase each time you press cycling
back. To advance to next digit and move to minutes and eventually to day of the week by pressing
button. Follow this process to set up the two minute numbers to get the correct time.
4. After setting up the current time, press button again and the robot will go into current day
of the week setting. The week digit on the screen will flash.
5. Press the button and the day of the week number will increase than cycle back to 0.You
can set up the correct day of the week. 0 stands for Sunday and 6 for Saturday.
6. After finishing the time settings press button for at least three seconds to save the current
time settings and exit to normal operation.
Table of contents
Other ElectrIQ Vacuum Cleaner manuals
ElectrIQ
ElectrIQ iQLEAN-GR01 User manual
ElectrIQ
ElectrIQ iQLEAN-CR01 User manual
ElectrIQ
ElectrIQ eiQ-R900M User manual
ElectrIQ
ElectrIQ iQlean-LR02C30 User manual
ElectrIQ
ElectrIQ eiQ-C22EW User manual
ElectrIQ
ElectrIQ eIQ-RoboVac User manual
ElectrIQ
ElectrIQ CLARA User manual
ElectrIQ
ElectrIQ eiQ-RBV10 User manual
ElectrIQ
ElectrIQ iQLEAN-LR01 User manual
ElectrIQ
ElectrIQ iQLEAN-CR01 User manual
