Elcometer 1615 User manual
English
Elcometer 1615
Variable Impact Tester
- Kit of Parts -
Operating Instructions
1615_kits_TMA_0439_00_02.fm Page -1 Thursday, September 25, 2008 12:27 PM
English
R
is a registered trademark of Elcometer Limited.
All other trademarks acknowledged.
© Copyright Elcometer Limited. 2008.
All rights reserved. No part of this Document may be reproduced, transmitted, transcribed, stored (in a
retrieval system or otherwise) or translated into any language, in any form or by any means (electronic,
mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
A copy of this Instruction Manual is available for download on our Website via www.elcometer.com/
downloads.
Doc.No. TMA-0439 Issue 02
Text with Cover No:20597
1615_kits_TMA_0439_00_02.fm Page 0 Thursday, September 25, 2008 12:27 PM
R
1
CONTENTS
Section Page
1 About this kit of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Adjusting the guide tube of the basic tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Fitting the parts onto the basic tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 Assembling the kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Spares and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 Related equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1615_kits_TMA_0439_00_02.fm Page 1 Thursday, September 25, 2008 12:27 PM
R
2
Thank you for purchasing this kit of parts for your Elcometer 1615 Variable Impact Tester. Welcome to
Elcometer.
Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings
and concrete. Our products cover all aspects of coating inspection, from development through application
to post application inspection.
Your Elcometer 1615 Variable Impact Tester is a world beating product. With the purchase of this kit of parts
you now have access to the worldwide service and support network of Elcometer. For more information visit
our website at www.elcometer.com
1 ABOUT THIS KIT OF PARTS
The Elcometer 1615 Variable Impact Tester is used to evaluate the resistance of a coating to impact
(elongation, cracking or peeling).
The coated specimen is placed on top of a die and impact between the specimen and a hemispherical
punch is produced by means of a falling weight. The specimen is removed from the tester and the damage
to the coating caused by the rapid deformation of the metal is evaluated.
This kit of parts will enable the tester to be used in accordance with one or more of the test standards listed
in section 1.1 on page 3.
The appropriate kit of parts must be ordered in addition to the basic tester. These instructions describe how
to assemble the kit of parts onto the basic tester. For instruction on how to use the kit of parts, please refer
to the separate operating instructions supplier with the tester (operating instructions for all Elcometer
products can be downloaded from our Website via www.elcometer.com/downloads).
To maximise the benefits of this kit of parts please take some time to read these Operating Instructions. Do not
hesitate to contact Elcometer or your Elcometer supplier if you have any questions.
1615_kits_TMA_0439_00_02.fm Page 2 Thursday, September 25, 2008 12:27 PM
R
3
1.1 WHAT THE BOX CONTAINS
Kit For testing to standard Box contents
A ISO 6272:1993
EN 13523-5:2001
JIS K 5600-5-3:1999
DIN EN ISO 6272-1:2004
SN EN ISO 6272-1:2004
ÖNORM EN ISO 6272-1:2006
• Falling indenter with handle, stop key and a punch (20
mm) (total mass = 1 kg).
• Die (27 mm) with fixing screw
• Specimen clamp with two fixing screws
• Stop collar
Additional 1 kg weights are available as an optional extra -
see “Spares and accessories” on page 13.
B ISO 6272-2:2002
ASTM D 2794:2004
QUALICOAT:2006
BS EN ISO 6272-2:2004
• Weight with handle (1 kg)
• Static indenter with handle and punch (15.9 mm)
• Punch (12.7 mm)
• Die (16.3 mm) with fixing screw
• Hexagonal wrench (3 mm)
C EN 12206-1:2004
BS6496:1984
ASTM D 2794:2004
• Weight with handle (2 lb)
• Static indenter with handle and punch (15.9 mm)
• Die (16.3 mm) with fixing screw
• Hexagonal wrench (3 mm)
1615_kits_TMA_0439_00_02.fm Page 3 Thursday, September 25, 2008 12:27 PM
R
4
D ISO 6272-1:2002
BS EN ISO 6272-1:2004
• Falling indenter with handle, stop key and punch (20
mm) (total mass = 1 kg).
• Die (27 mm) with fixing screw
• Specimen clamp with two fixing screws
• Hexagonal wrench, x2 (3 mm, 4 mm))
• Stop collar
E NF T30-017:1989 • Falling indenter with handle and punch (23 mm) (total
mass = 400 g).
• Die (22 mm) with fixing screw
• Hexagonal wrench (3 mm)
Kit For testing to standard Box contents
1615_kits_TMA_0439_00_02.fm Page 4 Thursday, September 25, 2008 12:27 PM
R
5
F ISO 6272:1993
EN 13523-5:2001
JIS K 5600-5-3:1999
DIN EN ISO 6272-1:2004
SN EN ISO 6272-1:2004
ÖNORM EN ISO 6272-1:2006
ISO 6272-2:2002
ASTM D 2794:2004
QUALICOAT:2006
BS EN ISO 6272-2:2004
• Falling indenter with handle, stop key and a punch (20
mm) (total mass = 1 kg).
• Weight with handle (1 kg)
• Static indenter with handle and punch (15.9 mm)
• Punch (12.7 mm)
• Die (27 mm) with fixing screw
• Die (16.3 mm) with fixing screw
• Specimen clamp with two fixing screws
• Hexagonal wrench, x2 (3 mm, 4 mm)
• Stop collar
Additional 1 kg weights are available as an optional extra -
see “Spares and accessories” on page 13.
Kit For testing to standard Box contents
1615_kits_TMA_0439_00_02.fm Page 5 Thursday, September 25, 2008 12:27 PM
R
6
2 ADJUSTING THE GUIDE TUBE OF THE BASIC TESTER
1. Raise the indenter by lifting the handle.
2. Place the specimen on the die and clamp in place by rotating the specimen clamp
(if fitted to your tester).
3. Lower the indenter gently until the punch rests on the specimen.
4. Check that the centre of the handle is aligned with the 0 (zero) engraved line on
the guide tube scale. If adjustment is required :
• Unscrew the guide tube clamp.
• Adjust the position of the guide tube until a correct zero is obtained.
• If your tester is fitted with a stop collar, also ensure that the slot in the guide
tube is aligned with the notches in the stop collar.
Tighten the guide tube clamp.
1615_kits_TMA_0439_00_02.fm Page 6 Thursday, September 25, 2008 12:27 PM
R
7
3 FITTING THE PARTS ONTO THE BASIC TESTER
Note: Your test kit may not include all the parts listed below.
1. Die
Place die (1) into hole in base plate and
fix in place using the screw provided in
the kit of parts (1a).
2. Specimen clamp
Position specimen clamp (2) under
guide tube supporting arm and fix in
place using the two screws (2a)
provided in the kit of parts (remove
blanking plugs first if necessary).
3. Stop collar
Slide stop collar (3) onto guide tube and
engage with locating pin on base.
1
1a
2
2a
3
1615_kits_TMA_0439_00_02.fm Page 7 Thursday, September 25, 2008 12:27 PM
R
8
4. Release collar
Slide release collar (4) onto guide tube
and then tighten fixing screw (4a). Note:
Fit this item after inserting the indenter
and any weights required.
4 ASSEMBLING THE KITS
Before assembling any of the test kits, first check that the guide tube is positioned correctly in the guide tube
supporting arm clamp and adjust if necessary - see “Adjusting the guide tube of the basic tester” on page 6.
Remove the release collar before starting.
For guidance on how to fit the parts see “Fitting the parts onto the basic tester” on page 7.
4
4a
1615_kits_TMA_0439_00_02.fm Page 8 Thursday, September 25, 2008 12:27 PM
Table of contents
Other Elcometer Test Equipment manuals
Elcometer
Elcometer 1700 User manual
Elcometer
Elcometer 510 S User manual
Elcometer
Elcometer 506 User manual
Elcometer
Elcometer 510 User manual
Elcometer
Elcometer 106 Scale 6 User manual
Elcometer
Elcometer 110 User manual
Elcometer
Elcometer 108 User manual
Elcometer
Elcometer 456 User manual
Elcometer
Elcometer 1720 User manual
Elcometer
Elcometer 4340 Installation and user guide
Elcometer
Elcometer 1506 User manual
Elcometer
Elcometer 456 User manual
Elcometer
Elcometer 4270 User manual
Elcometer
Elcometer 501 User manual
Elcometer
Elcometer 3092 User manual
Elcometer
Elcometer 224 User manual
Elcometer
Elcometer 506 User manual
Elcometer
Elcometer 510 S User manual
Elcometer
Elcometer 1270 User manual
Elcometer
Elcometer 108 User manual
