eKey Home User manual
OPERATING INSTRUCTIONS
en
ekey home
Information about these operating instructions en│1
English
Translation of the original instructions –ID171/635/0/526
Table of contents
Information about these operating instructions ........................... 3
Note......................................................................................... 3
Declaration of conformity ............................................................ 3
Warranty and manufacturer's guarantee ........................................ 3
Copyright protection ................................................................... 3
Target group ............................................................................. 3
Explanation of symbols, abbreviations, and terminology................... 4
Safety information........................................................................ 5
Proper use and areas of application............................................... 5
Product liability and limitation of liability ........................................ 5
Classification of notices ............................................................... 6
Notices ..................................................................................... 6
Introduction to the system ........................................................... 7
System overview........................................................................ 7
Scope of delivery........................................................................ 7
Finger scanner........................................................................... 8
Code pad ................................................................................ 12
Control panels ......................................................................... 14
Technical specifications ............................................................. 16
Installation ..................................................................................18
Commissioning ............................................................................19
Commissioning the system ........................................................ 19
Performing test mode ............................................................... 21
Operating concept .......................................................................24
Usage of the finger scanner with the app ....................................25
Downloading the app ................................................................ 25
Coupling a mobile device for the first time.................................... 26
Changing security codes............................................................ 27
Storing a finger........................................................................ 28
Disabling Bluetooth................................................................... 29
Coupling additional mobile devices.............................................. 29
Managing multiple Bluetooth finger scanners ................................ 30
Storing the user coupling code ................................................... 31
Resetting the app security code.................................................. 31
Protecting the system in the event that the mobile device is lost ..... 32
Opening a door ........................................................................ 33
2│en Information about these operating instructions
Usage of the finger scanner with the control panel menu............35
Entering the security code ......................................................... 35
Changing the security code ........................................................ 37
Setting finger scanner LED intensity ............................................ 38
Setting the switching duration .................................................... 39
Setting the digital input............................................................. 40
Storing the identification method ................................................ 42
Opening a door ........................................................................ 47
Deleting a user......................................................................... 49
Deleting an identification method................................................ 49
Performing demo mode ............................................................. 50
Performing fair mode ................................................................ 51
Calling the serial and firmware version number ............................. 53
Usage of the code pad with shortcuts..........................................54
Entering the admin code............................................................ 54
Changing the admin code .......................................................... 56
Setting the automatic back-illumination ....................................... 58
Setting the brightness of the back-illumination.............................. 59
Setting the signaling that indicates when a button has been pressed 60
Setting an acoustic signal for opening.......................................... 61
Storing user codes.................................................................... 62
Opening a door ........................................................................ 64
Deleting a user code ................................................................. 65
Performing demo mode ............................................................. 66
Performing fair mode ................................................................ 67
Resetting the system to default settings .....................................68
Via the app.............................................................................. 69
Via the control panel ................................................................. 70
Via the code pad ...................................................................... 71
Updating the software.................................................................72
Error displays and troubleshooting..............................................72
Control panel ........................................................................... 72
Finger scanner ......................................................................... 73
Code pad ................................................................................ 74
Maintenance ................................................................................75
Disposal.......................................................................................75
Information about these operating instructions en│3
Information about these operating
instructions
Read these operating instructions carefully before use. These operating
instructions form a component of the product. Ensure that they are stored
in a safe place. These operating instructions contain important information
on the product; in particular, its proper use, safety, installation,
commissioning, usage, maintenance, and disposal.
Please contact your dealer for further information about the product.
A large-font version of these operating instructions is available at
http://www.ekey.net.
These operating instructions are not subject to updating. We reserve the
right to make technical modifications and change the product's
appearance; any liability for errors and misprints is excluded.
ekey biometric systems GmbH hereby declares that the product conforms
to the relevant European Union directives.
The version of our general terms and conditions in force on the date of
purchase shall apply. See http://www.ekey.net.
Copyright © 2016 ekey biometric systems GmbH.
All content, artwork, and any ideas contained in these operating
instructions are subject to applicable copyright laws. Any transmission,
relinquishment, or transfer of this content or parts thereof to any third
party requires the prior written consent of ekey biometric systems GmbH.
Translation of the original documentation.
These instructions are aimed at persons who commission and perform
maintenance on the ekey system, create users, and instruct users in how
to operate the system.
Note
Declaration of
conformity
Warranty and
manufacturer'
s guarantee
Copyright
protection
Target group
4│en Information about these operating instructions
Symbols:
1.
Step-by-step instructions
References to sections in these operating
instructions
References to the mounting instructions
References to the wiring diagram
□
Listing without specified order, 1st level
Displayed value
Displayed values
ekey home FS OM
Product names
MENU ITEM
Menu items
Button
Buttons
Abbreviations and terminology:
CP
Control panel
FAR
False acceptance rate
FRR
False rejection rate
FS
Finger scanner
IN
integra
OM
Outlet-mounted
RFID
Radio-frequency identification
Sn.
Serial number
Vn.
Firmware version number
WM
Wall-mounted
Fingerprint
The biometric information extracted from the
fingerprint
Identification
method
Method that a registration unit uses to identify a
person. Examples include fingers, RFID
transponders, and user codes.
Matching
Comparison between the stored reference and the
identification feature. If the two match, the device
signals user recognition.
Normal mode
Default operating status in which the system is
operated.
Registration unit
Finger scanner or code pad
Explanation of
symbols,
abbreviations,
and
terminology
Safety information en│5
Safety information
This product is an access control system with a biometric or mental
identification feature (finger scan or pin code). The system is comprised of
a registration unit and control panel. It is available in various models and
component combinations.
The biometric access control system detects the characteristics (minutiae)
of the fingerprint contours, compares them to the biometric information
saved from the reference fingerprint image, and opens the door in the
event of a match. One variant allows the user to be identified and the
door opened by means of an RFID transponder.
The mental access control system detects the pin codes which are
entered, compares them to the stored reference pin codes, and opens the
door in the event of a match.
The system is primarily designed for opening house doors, apartment
doors, and garage doors in homes and businesses.
To ensure proper use, the ekey system must be installed in accordance
with the mounting instructions and the wiring diagram. The installation
must be performed in full and by a professional. The electrical engineer
who installs the equipment must approve the ekey system for use, as well
as any accessories that are installed.
The ekey system is suitable for use as outlined in these operating
instructions. Any other kind of use is deemed improper use.
Safe operation and function of the devices can be impaired in the
following situations. Liability due to malfunctioning is transferred to the
operator/user in such cases:
□The system devices are not installed, used, maintained, or
cleaned in accordance with the instructions
□The system devices are not used within the scope of proper use
□Unauthorized modifications are carried out on the system
devices by the operator
Proper use
and areas of
application
Product
liability and
limitation of
liability
6│en Safety information
DANGER
Safety notice: Denotes imminent danger which could lead to death or
serious injuries.
ATTENTION
Notice: Denotes possible property damage which cannot result in
injuries.
NOTICE
Notice: Denotes additional information and useful tips.
DANGER
Risk of electrocution: All ekey home devices are to be operated with
Safety Extra Low Voltage (SELV). Only use power supplies rated
protection class 2 according to VDE 0140-1.
Failure to do so will create a risk of fatal electrocution.
Only certified electricians are authorized to carry out the electrical
installation work.
ATTENTION
Tamper-proofing: Do not mount the control panel outdoors.
If it is mounted outdoors, it could be tampered with.
Mount the control panel in a secure internal area.
Classification
of notices
Notices
Introduction to the system en│7
Introduction to the system
Fig. 1: Overview of the system
1Connecting cable from registration unit to control panel
2Power supply
3ekey registration unit
4ekey control panel
5Distribution box
6Motorized lock
7Cable transfer
8Connecting cable from control panel to motorized lock
The system is comprised of a registration unit and control panel.
The biometric access control system detects the characteristics (minutiae)
of the fingerprint contours, compares them to the biometric information
saved from the reference fingerprint image, and opens the door in the
event of a match. One variant allows the user to be identified and the
door opened by means of an RFID transponder.
The mental access control system detects the pin codes which are
entered, compares them to the stored reference pin codes, and opens the
door in the event of a match.
□One registration unit
□RFID transponder for finger scanners with RFID functionality
□One control panel
□Operating instructions, mounting instructions, wiring diagram
□Optional: matching accessories (cable transfer, power supply,
connecting cable, covers, etc.).
System
overview
Scope of
delivery
8│en Introduction to the system
Product name
ekey home
FS WM
ekey home
FS IN
ekey home
FS OM
Figure
Table 1: Finger scanner
Function of the finger scanner
1Front phalanx
2Fingerprint
Fig. 2: Fingerprint
The finger scanner detects the fingerprint by means of a line sensor and
subsequently processes it. It compares the result with that of the
biometric information extracted from the reference fingerprint image and
opens the door in the event of a match. The finger scanner only works
correctly and reliably with the front phalanx print. Swipe your finger
steadily and evenly over the sensor in the correct position.
The models with RFID functionality detect and identify RFID transponders.
Finger scanner
Introduction to the system en│9
Finger scanner controls
Control
Function
Finger swipe
area
Store fingers by “swiping the finger” evenly
downward over the sensor.
Identification by “holding up the RFID
transponder”, which involves holding an RFID
transponder over the finger swipe area of the finger
scanner.
Sensor
System programming by “Finger Touch”, a short,
rapid touch of the sensor with the finger.
Table 2: Finger scanner controls
1Right guiding edge
2Sensor
3Left guiding edge
Fig. 3: Finger swipe area and sensor
Other manuals for Home
3
Table of contents
Other eKey IP Access Controllers manuals
eKey
eKey Home CP WM 1 User manual
eKey
eKey FS WM 2.0 User guide
eKey
eKey FS UP User manual
eKey
eKey FS OM Crestron Series User manual
eKey
eKey TOCAhome integra User manual
eKey
eKey Multi User manual
eKey
eKey home FS IN User manual
eKey
eKey TOCAhome Installation instructions
eKey
eKey home Series User manual
eKey
eKey ekey home CP WM 1 User manual
