EK-Quantum Vector Strix RTX 3070 Backplate User manual

USER GUIDE

GPU WATER BLOCK

EK-Quantum

Vector Strix RTX 3070

Before you start using this product, please follow these basic guidelines:

Carefully read the manual before beginning with the

installation process.

Remove your graphics card from the computer for the safest

mounting process to prevent any possible damage to your

GPU or its circuit board (PCB).

EK Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured with the

rubber O-ring gaskets.

The use of quality market-proven corrosion-inhibiting

coolants is always strongly recommended for any liquid

cooling system.

Do not use pure distilled water as a cooling liquid! For best

results, EK recommends the use of EK-CryoFuel Coolants.

Make sure to bleed air out of your water block thoroughly to

reach optimal performance.

- 3 -

TABLE OF CONTENTS

BOX CONTENTS 4

REQUIRED TOOLS 5

WATER BLOCK DIMENSIONS 5

TECHNICAL SPECIFICATIONS AND MAIN WATER BLOCK PARTS 6

PREPARING THE GRAPHICS CARD 7

REMOVING THE STOCK COOLER 7

REMOVING THE STOCK BACKPLATE 8

CLEANING THE PCB 9

CUTTING AND PLACING THERMAL PADS 9

APPLYING THERMAL COMPOUND 10

INSTALLING THE WATER BLOCK 11

PLACING THE BLOCK ON THE GRAPHICS CARD 11

ATTACHING THE BLOCK TO THE GRAPHICS CARD 11

CHECKING FOR CONTACT 12

INSERTING THE GRAPHICS CARD INTO THE CHASSIS 12

INSTALLATION OF FITTINGS AND TUBING 13

CONNECTING THE D-RGB LED STRIP 13

REPLACING THE LED STRIP (Optional) 14

TESTING THE LOOP 14

SUPPORT AND SERVICE 15

SOCIAL MEDIA 15

- 4 -

BOX CONTENTS

4 mm

6 mm

8 mm

M3x4 DIN7985 Screw (2 pcs) EK-Loop Multi Allen Key (1 pc)

M2.5 Nut (2 pcs)

M2,5x6 AX1 Screw (13 pcs)

Allen Key 2.5. mm (1 pc) Thermal Pad F 1.0 mm (5 pcs)

Thermal Grease (1 pc)

M2,5x8 AX1 Screw (2 pcs)

M2,5x4 AX1 Screw (16 pcs)

EK-Quantum Vector Strix RTX 3070 M2.5 PVC Washers (16 pcs)

120 mm

16 mm

EK-Plug G1/4 (2 pcs)

Mounting mechanism - You may not need all the screws,

mounting mechanism is universal!

- 5 -

WATER BLOCK DIMENSIONS

293 mm

129 mm

154 mm

142 mm

14,6 mm

16,4 mm

Phillips Head Screwdriver Torx T6 Screwdriver Scissors

REQUIRED TOOLS

- 6 -

TECHNICAL SPECIFICATIONS AND MAIN WATER BLOCK PARTS

TO P P L ATE

(PLEXI / ACETAL)

O-RING

176 x 2

M4/M2,5 x 6,6 STANDOFF

M4/M2,5 x 2,5 STANDOFF - SHORT

COLDPLATE (COPPER / NICKEL)

JET

PL AT E

LED

D-RGB STRIP

M4/M2,5 x 2,5

STANDOFF - LONG

M4 x 27 DIN7984 SCREW

TERMINAL (PLEXI / ACETAL)

O-RING 15x1

M4 x 8 DIN7984 SCREW

EK BADGE STANDOUT

(BLACK / WHITE)

Technical Speciﬁcation:

- Dimensions (LxHxW): 293 x 154 x 16.4 mm

- D-RGB (Addressable RGB) Cable - Length: 500 mm

- D-RGB LED Count: 12

- D-RGB Connector: Standard 3-Pin (+5V, Data, Blocked, Ground)

- 7 -

PREPARING THE GRAPHICS CARD

STEP 1

REMOVING THE STOCK COOLER

Use the Phillips head screwdriver to remove the three screws from the

GPU bracket side and six screws from the side of the backplate.

After removing all nine screws (marked in the picture), carefully detach

the PCB with the backplate from the stock cooler and disconnect two

cables connected to the PCB.

Always remove the stock cooler slowly - it might be ﬁrmly

glued to the PCB with thermal pads.

For this Step, you will need:

Phillips Head Screwdriver Torx T6 Screwdriver

STEP 1

- 8 -

STEP 2

REMOVING THE STOCK BACKPLATE

Use the Phillips head screwdriver to remove the two screws attaching

the GeForce® RTX™ plate to the backplate.

Remove the nine screws with Phillips and Torx head screwdrivers

and carefully detach the stock backplate from the PCB.

STEP 2

- 9 -

STEP 3

STEP 1

Your GPU water block comes with thermal pads that have to be cut

into smaller pieces to cover all the VRM components, such as COILs,

MOSFETs, and drivers.

You must remove the protective foil from both sides of the

thermal pad before installation.

Thermal pads:

5x Thermal Pad F 1.0 mm – (120 x 16 mm) EAN: 3830046996732

STEP 1

Thermal Pad F – 1.0 mm (120 x 16 mm)

STEP 3

CLEANING THE PCB

Wipe off the remains of the original thermal compound using a

nonabrasive cloth or Q-tip, as shown in the sample image, until the

components and circuit board are completely clean. EK recommends

the use of denatured alcohol for removing TIM leftovers. After that,

remove all remaining stock thermal pads from the PCB.

CUTTING AND PLACING THERMAL PADS

120 mm

16 mm

1 mm

- 10 -

Thermal Grease

STEP 2

Once cut to size, thermal pads should be placed on the PCB, as

illustrated in the image. EK made sure to provide you with more

than an adequate quantity of thermal pads to complete this Step.

STEP 1

Apply the enclosed EK-TIM Ectotherm thermal grease (thermal

compound) on the CPU heat spreader – IHS – as shown in the

image. The layer of the thermal compound must be thin and even

over the entire surface of the IHS.

The excessive or uneven application of thermal grease

may lead to poor performance!

STEP 1

APPLYING THERMAL COMPOUND

For this Step, you will need:

Thermal Pad F 1.0mm

Other manuals for Vector Strix RTX 3070 Backplate

Table of contents

Other EK-Quantum Computer Hardware manuals

EK-Quantum

EK-Quantum Vector2 XC3 RTX 3080 D-RGB User manual

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB User manual

EK-Quantum

EK-Quantum Vector Strix RTX 3070 Backplate User manual

EK-Quantum

EK-Quantum Vector2 Arc A750-RGB User manual

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB User manual

EK-Quantum

EK-Quantum Momentum2 ROG Strix X570-i Gaming D-RGB User manual

EK-Quantum

EK-Quantum Kinetic FLT Accent - Silver User manual

EK-Quantum

EK-Quantum Vector Strix RTX 3080Ti User manual

EK-Quantum

EK-Quantum AM5 User manual

EK-Quantum

EK-Quantum EK-Classic GPU Water Block Strix RTX 3070... User manual

EK-Quantum

EK-Quantum LGA1700 User manual

EK-Quantum

EK-Quantum Monoblock Series User manual

EK-Quantum

EK-Quantum Vector Strix RTX 3090 Backplate User manual

EK-Quantum

EK-Quantum Velocity 2 D-RGB AM4 User manual

EK-Quantum

EK-Quantum Vector FTW3 RTX 3080 User manual

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB User manual

EK-Quantum

EK-Quantum MSI MPG X670E CARBON EK X D-RGB User manual

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB User manual

EK-Quantum

EK-Quantum Momentum MSI Z590 Carbon D-RGB User manual

EK-Quantum

EK-Quantum Vector Master RTX 4090 D-RGB User manual

EK-Quantum

EK-Quantum Reflection PC-O11D Mini D5 PWM D-RGB User manual

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB User manual

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB User manual

EK-Quantum

EK-Quantum Momentum2 ROG Strix X570-i Gaming D-RGB User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual