Proper Use
This 75W DETAIL SANDER is designed for dry grinding/sanding/polishing of wood,
iron, plastic and similar materials using the appropriate grinding/sanding paper,
rust-removing pad and polishing pad. The equipment is not suitable for wet
grinding/sanding/polishing.
The operating instructions as supplied by the manufacturer must be obeyed to ensure
that the equipment is used properly & the manufacturer cannot be held liable for
damage or injury caused by improper or incorrect usage.
The equipment is to be used only for its prescribed purpose & any use which is not
expressly permitted in these instructions may result in damage to the equipment
and place the user in serious danger. Be sure to observe the restrictions in the safety
information.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for equivalent purposes.
DANGER!
When using ensure that any dry dust, etc., will not become
close to any: Burning materials, smouldering ash and
cigarette buts, combustible, caustic, inflammable or explosive
substances, vapour or liquids. There is a risk of burns injury, or
burning damage to the detail sander parts. For safety reasons, the
equipment is not allowed to be used as a drive unit for other tools
or products of any kind.
The equipment is allowed to be used only for its intended
purpose. Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be liable
for any damage or injuries of any kind resulting from such
misuse.
77014_4460595_11016_UG.indd 10 18/04/2017 1:17 pm
