EINHELL Expert GE-CT 18 Li Kit User manual
GE-CT 18 Li Kit
GE-CT 18 Li Kit
31011:.rN-.I47.111.43:.rN-.trA
31011:.rN-.I37.111.43:.rN-.trA
7
GB
Original operating instructions
Cordless Lawn Trimmer
Anl_GE_CT_18_Li_Kit_SPK7.indb 1 14.01.13 13:45
- 2 -
1
2
4
6
9
2
1
7
11 10
11
3
13
8
5
1 2
9
6
8
7
4 12
Anl_GE_CT_18_Li_Kit_SPK7.indb 2Anl_GE_CT_18_Li_Kit_SPK7.indb 2 14.01.13 13:4514.01.13 13:45
- 3 -
3 4
5 6
7 8
6 8
4
I
6
5
II
12
3
Anl_GE_CT_18_Li_Kit_SPK7.indb 3Anl_GE_CT_18_Li_Kit_SPK7.indb 3 14.01.13 13:4514.01.13 13:45
- 4 -
9 10
K
11 12a
12b 13
13
Anl_GE_CT_18_Li_Kit_SPK7.indb 4Anl_GE_CT_18_Li_Kit_SPK7.indb 4 14.01.13 13:4514.01.13 13:45
- 5 -
14 15
16 17
18 19
9
9
Anl_GE_CT_18_Li_Kit_SPK7.indb 5Anl_GE_CT_18_Li_Kit_SPK7.indb 5 14.01.13 13:4614.01.13 13:46
- 6 -
20
1234
56
Anl_GE_CT_18_Li_Kit_SPK7.indb 6Anl_GE_CT_18_Li_Kit_SPK7.indb 6 14.01.13 13:4614.01.13 13:46
GB
- 7 -
Table of contents
1. Safety information
2. Layout and items supplied
3. Intended use
4. Technical data
5. Before putting into operation
6. Operation
7. Cleaning, maintenance and ordering of spare parts
8. Disposal and recycling
9. Faults
10. Charger indicator
Anl_GE_CT_18_Li_Kit_SPK7.indb 17 14.01.13 13:46
GB
- 8 -
Caution - Read the operating instructions to reduce the risk of injury
Anl_GE_CT_18_Li_Kit_SPK7.indb 18 14.01.13 13:46
GB
- 9 -
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete original operating in-
structions and safety information with due care.
Keep these operating instructions in a safe place
so that the information is available at all times. If
you give the equipment to any other person, hand
over these original operating instructions and the
safety information as well.We cannot accept any
liability for damage or accidents which arise due
to failure to follow these instructions and the safe-
ty information.
1. Safety information
For the relevant safety information please refer to
the booklet included in delivery.
WARNING
Read all the safety information and instruc-
tions. Any errors made in following the safety
information and instructions set out below may re-
sult in an electric shock, fire and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
Explanation of the warning signs on the
equipment (see Fig. 20)
1: Warning!
2: Wear eye protection!
3: Protect from moisture!
4: Read the instruction manual before starting!
5: Keep other people out of the danger area!
6: The equipment continues to rotate!
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1 Safety lock-off
2 On/Offswitch
3 Adjustment lock for turning the handle
4 Additional handle
5 Height adjustment
6 Edge guide
7 Blade head
8 Safety hood
9 Blade
10 Charging unit
11 Battery
12 Compartment for spare blades
13 Lock for rotatable motor head
2.2 Items supplied
• Open the packaging and take out the equip-
ment with care.
• Remove the packaging material and any
packaging and/or transportation braces (if
available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for
transport damage.
• If possible, please keep the packaging until
the end of the guarantee period.
IMPORTANT
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suffocating!
• Trimmer
• Guard hood
• Battery (Not supplied with Art. No. 34.111.73)
• Charging unit (Not supplied with Art. No.
34.111.73)
• Additional handle with spare blades
• Original operating instructions
• Safety information
3. Intended use
The equipment is designed for cutting lawns and
small areas of grass in private and hobby gar-
dens.
Equipment designed for use in private and hobby
gardens is regarded as unsuitable for use in pub-
lic facilities, parks and sports centers, along road-
ways, or in agriculture and forestry. The operating
instructions as supplied by the manufacturer must
be kept and referred to in order to ensure that the
equipment is properly used and maintained.
Important. This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The equipment may be used only for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse.The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Anl_GE_CT_18_Li_Kit_SPK7.indb 19 14.01.13 13:46
GB
- 10 -
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
4. Technical data
Speed n0.............................................8,500 min-1
Cutting circle ..........................................Ø 24 cm
Max. operating time ..................... approx. 40 min
Protection class ................................................III
LWA sound power level ............................... 88 dB
LpA sound pressure level ............................ 68 dB
Bd6.................................................ytniatrecnuK
Interchangeable battery .....18 V d. c. / 3000 mAh
........................... (optional: 18 V d. c. / 1500 mAh)
Vibration ..................................................5.8 m/s2
K uncertainty .......................................... 2.3 m/s²
Weight ....................................................... 2.2 kg
Sound pressure level
at the operator‘s ear............................... 78 dB(A)
Bd3.................................................ytniatrecnuK
Charging unit
Mains voltage ............................... 230 V ~ 50 Hz
Output
Rated voltage........................................ 21 V d. c.
Rated current ....................................... 3000 mA
The machine may exceed 85 dB (A).The operator
will require noise protection measures if this is
the case.The noise was measured in accordance
with prEN ISO 10518. The value of the vibrations
emitted by the handle was determined in ac-
cordance with prEN ISO 10518.
Important.
The vibration value changes according to the
area of application of the electric equipment and
may exceed the specified value in exceptional
circumstances.
Reduce noise generation and vibration to a
minimum!
• Use only equipment that is in perfect condi-
tion.
• Maintain and clean the equipment regularly.
• Adapt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
5. Before putting into operation
5.1 Fitting the safety hood (Fig. 3-4)
When fitting the safety hood (Fig. 1/Item 8) make
sure that the edge guide (Fig. 1/Item 6) is in a po-
sition in which the blade head (Fig. 1/Item 7) does
not obstruct the fitting. Push the guard hood (Fig.
1/Item 8) in the direction of the arrow onto the
motor housing as shown in Fig. 3. Make sure that
it latches in place correctly! Make sure that the
guard hood is fitted as in Fig. 4.
5.2 Height adjustment (Fig. 5)
Undo the union nut (Fig. 5/Item 5) until the grass
trimmer handle can be moved in and out freely.
Now set the required working height (Fig. 6) and
secure the handle in this position by tightening
the union nut again.
5.3. Fitting the additional handle (Fig. 7)
Fit the additional handle to the mount provided,
paying attention to the teeth (Fig. 7/Item I & II).
Then secure the additional handle with the help
of the screw and the adjustment lock provided.
Make sure that the compartment for the spare
blades faces the top of the equipment.
5.4 Adjusting the additional handle (Fig. 8)
Undo the adjustment lock (Fig. 8/Item 3) for the
additional handle until it can be moved forwards
and backwards without any great resistance. Set
the required position and tighten the securing
screw again.
5.5 Adjusting the angle of tilt of the guide
handle (Fig. 9)
Press the button for the angle of tilt adjustment
(Fig. 9/Item K). Now you can set the long handle
to the required tilt. Release the button and allow
the handle to lock into position to fix the angle of
tilt. Three different locking angles are possible.
5.6. Installing the battery (Fig. 10/11)
Press the side pushlock buttons of the battery
pack as shown in Fig. 10 and push the battery
pack into the mount provided.When the battery
pack is positioned as in Fig. 11, make sure that
the pushlock buttons latch in place! To remove the
battery pack, proceed in reverse order.
Anl_GE_CT_18_Li_Kit_SPK7.indb 20 14.01.13 13:46
This manual suits for next models
2
Table of contents
Other EINHELL Expert Trimmer manuals
