Eiki LC-X71 User manual

Other manuals for LC-X71

3

Table of contents

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual

Asus

Asus ZenBeam Latte user manual

LCD PROJECTOR

lENS REPLACEMENTAND INSTAllATION MANUAL

CAUTION

When installing or replacing the Projection Lens, refer to this manual. For installa-

tion of the lens, use the parts designated inthe manual.

AVAilABLE lENS

This projector applies the Projection Lenses listed below. Use the suitable lens for

where the projector is used.

NOTES ON LENS INSTAllATION

·Lens installation and replacement should be made by trained sales engi-

neer or qualified service personnel.

·Be sure to install the lens following this procedure precisely.

·Do not touch or remove any parts except the lens and related parts. It may

result in malfunctions, electrical shock, fire hazard or other accidents.

·Before installing or replacing the lens, check that the Model No. of the

Projection Lens matchesto the projector.

·When moving or setting up the projector,be sure to replace the Lens Cover

to protect the surface. And be careful not to hold or subject the lens to

strong forces. It maydamage the lens, cabinet, or mechanical parts.

·For details of the lens and installation, contact the sales dealer where you

purchasedthe projector.

- 1-

1AA6P1 P4094A- (KE6B)

Model NO. Type Zoom Focus

AH-23122 Short Throw Zoom Lens Motor Driven Motor Driven

AH-23132 Long Throw Zoom Lens Motor Driven Motor Driven

AH-32011 Fixed Short Throw Zoom Lens Fixed Manual

AH-24241 Ultra-LongThrow Zoom Lens Motor Driven Motor Driven

LENS REPLACEMENTPROCEDURE

Performthe steps IT] to [§] for lens replacement.

First set the lens at the fully lower position with lens

shift adjustment.

OJ REMOVETHE FRONT CABINET

1. Remove 2 Screws-A.

2. Remove the front cabinet

~REMOVE THE LIGHT-BLOCK SHEET BASE

AND LIGHT-BLOCK SHEET

1. Slide the light-block sheet base upward and

removeit.

2. Removethe light-block sheet from lens.

@] REMOVETHE LENS

1. Grasp the Lens Lock Lever and turn it fully

upward. Removethe Lens into the projector.

2. Disconnect the lens motor lead connector to the

socket on the lens attachment.

3. Remove4 Screws and remove lens attachment.

- 2 -

LIGHT-BLOCK

SHEET BASE

LIGHT-BLOCK

SHEET

Pullthe Lens

Lock Lever

upward

LENS LOCK

LEVER

SCREW -

CONNECTOR

[i] MOUNTTHE LENS

1. Remove protective caps (front and back) on the optional lens.

2. Mount the lens on the lens attachment which removed at step 3 with 4 Screws.

3. Connect the lens motor lead connector to the socket on the lens attachment. (Motor Driven

Lens only.)

4. Grasp the Lens Lock Lever and turn it fully upward. Install the Lens into the projector. Turn

the Lens Lock Lever fully downward until lever is Locked (clicked position) properly.

When installing the Motor Driven Lens, be sure to mount Lens Motor on left-side.

After installing the lens, make sure the Lens is not loose and properly installed.

LENS

ATTACHMENT LENS LOCK LEVER

Part No. (610 306 6707)

DRIVER

IN THE LENS

Part No. (610 275 6029)

SCREW LENS

ATTACHMENT

SOCKET

CONNECTOR

LENS MOTOR

LEAD

LENS LOCK LEVER

- 3 -

For AH-23122, AH-23132 and AH-24241

~MOUNT THE LIGHT-BLOCKSHEET AND

~LIGHT-BLOCKSHEETBASE

1. Mount the light-block sheet on the lens. (In the same

position as the removed sheet has been placed). Use

the sheet included with the lens.

Make sure the mark (TOP and BACK) on Light-Block

Sheet and set them properly.

2. Mountthe light-block sheet base.

~MOUNT THE FRONT CABINET

1. Mount the front cabinet with 2 screws.

For AH-32011

* Light-blocksheet base and Light-blocksheet are not used.

@J MOUNT THE FRONT CABINET

1. Mount the front cabinet with 2 screws.

- 4 -

FRONT

CABINET

/