EGO CTA9500 User manual
OPERATOR'S MANUAL
CULTIVATOR ATTACHMENT
MODEL NUMBER CTA9500/CTA9500-FC
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
Español p. 63
Français p. 31
EXCLUSIVELY FOR USE WITH
EGO POWER+ POWER HEAD
PH1400/PH1400-FC
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC2
TABLE OF CONTENTS
Safety Symbols ..........................................4
Safety Instructions.....................................5-11
Introduction ............................................12
Specications ..........................................12
Packing List ............................................12
Description .........................................13-14
Assembly ...........................................15-18
Operation ...........................................19-21
Maintenance ........................................22-26
Troubleshooting ......................................27-28
Warranty ...........................................29-30
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC 3
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
OPERATOR'S MANUAL
WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
◾Lead from lead - based paints
◾Crystalline silica from bricks and cement and other masonry products, and
◾Arsenic and chromium from chemically - treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemical: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to lter out microscopic particles.
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC4
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING: Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to following all instructions listed below
may result in electric shock, re, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING! The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shield and a full face shield when
needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read,
understand, and follow all instructions on the machine before attempting to assemble
and operate it.
Safety Alert Indicates a potential personal injury hazard.
Read &
Understand
Operator's
Manual
To reduce the risk of injury, user must read and
understand the operator’s manual before using
this product.
Wear Eye
Protection
Always wear safety goggles or safety glasses
with side shields when operating this product.
Wear Protective
Gloves
Protect your hands with gloves when handling
blades. Heavy-duty, nonslip gloves improve your
grip and protect your hands.
Ricochet Thrown objects can ricochet and result in
personal injury or property damage.
Keep Hands and
Feet Away
Never attempt to operate this product with one
hand. Loss of control of this product resulting in
serious or fatal injury may result. To reduce the
risk of cut injuries, keep hands and feet away
from the rotating blades. Never touch the rotating
blades with your hand or any other part of your
body.
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC6
Danger - Electric
Shock
To reduce the risk of electrocution, ensure that
there are no buried power cables that may be
carrying electric current that could come into
contact with the working tool. Damaging such
cables with the tool can cause electric shocks
with serious or fatal consequences.
Recycle Symbols
This product uses lithium-ion (Li-ion) batteries.
Local, state, or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your
local waste authority for information regarding
available recycling and/or disposal options.
IPX4 Ingress Protection
Degree Protection from splashing water
V Volt Voltage
mm Millimeter Length or size
in. Inch Length or size
kg Kilogram Weight
lb Pound Weight
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC 7
GENERAL BATTERY-OPERATED POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings, instructions, illustrations and
specications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
WORK AREA SAFETY
◾Keep work area clean and well lit. Cluttered or dark areas invite accidents.
◾Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
◾Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
PERSONAL SAFETY
◾Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
◾Always use personal protective equipment. Personal protective equipment
such as eye protection, dust mask, non-skid safety shoes, hard hat and/or
hearing protection used for appropriate conditions will reduce personal injuries.
◾Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to the battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or energizing power tools that
have the switch on invites accidents.
◾Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a moving part of the power tool may result in
personal injury.
◾Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
◾Dress properly. Do not wear loose clothing or jewelry. Keep your hair and
clothing away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC8
◾If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
◾Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless action
can cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
◾Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate for
which it was designed.
◾Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must be
repaired.
◾Remove the battery pack, if detachable, from the power tool and/or
activate any battery disabling device before clearing jammed material,
making any adjustments, changing accessories, cleaning, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
◾Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
◾Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power
tools and accessories.
◾Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
◾Use the power tool, accessories, tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
◾Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces may lead to unsafe handling
and/or loss of control of the tool.
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC 9
◾Keep cables away from the working area of the tool. During operation
cables may be hidden from view and can be accidentally damaged by the tool.
BATTERY TOOL USE AND CARE
◾Recharge only with the charger specied by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of re when used
with another battery pack. Use only with the battery packs and chargers listed
below.
BATTERY PACK CHARGER
BA1120, BA1120-FC, BA1400, BA1400-FC,
BA2240, BA2240-FC, BA2800, BA2800-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,
BA2800T, BA2800T-FC, BA4200T, BA4200T-FC
CH2100, CH2100-FC,
CH5500, CH5500-FC
◾Use power tools only with specically designated battery packs. Use of
any other battery packs may create a risk of injury and re.
◾When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a re.
◾Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, ush with water. If liquid contact
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
◾Do not use a battery pack or tool that is damaged or modied. Damaged
or modied batteries may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
◾Do not expose a battery pack or tool to re or excessive temperature.
Exposure to re or temperature above 212 °F (100°C) may cause explosion.
◾Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specied in the instructions. Charging
improperly or at temperatures outside the specied range may damage the
battery and increase the risk of re.
CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC10
SERVICE
◾Have your power tool serviced by a qualied repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
◾Never service damaged battery packs. Service of battery packs should only
be performed by the manufacturer or authorized service providers.
SAFETY INSTRUCTIONS FOR CULTIVATOR
◾Keep hands away from blades.
◾Do not use near underground electric cables, telephone lines, pipes, or hoses. If in
doubt, contact your utility or telephone company to locate underground services.
◾Rotating blades can cause severe injury, keep all body parts away from rotating
blades.
◾Use extreme caution when reversing or pulling the machine towards you.
◾If the cultivator should start to vibrate abnormally or become noisy, stop the motor
and check immediately for the cause. Abnormal noise is generally a warning of
trouble.
◾Keep all fasteners tight to be sure the cultivator is in safe working condition.
◾Check that the hitch pins are fully inserted on the blade shaft before each use.
◾Do not operate power equipment after it has been dropped or damaged. Return it
to your nearest authorized servicing dealer for inspection and repair.
◾Make sure all proper guards and other safety devices are properly and securely
attached before using this product.
◾Be extremely careful when tilling in hard ground. The blades could catch in the
ground and propel the cultivator forward.
◾Do not overload the capacity of the machine by attempting to till too deep at too
fast a speed.
◾Inspect the area where the equipment is to be used and remove all foreign
objects.
◾Do not charge the battery pack in rain, or in wet locations.
◾Do not dispose of the battery in a re. The cells may explode. Check with
local codes for possible special disposal instructions.
◾Do not open or mutilate the battery. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
Other manuals for CTA9500
1
This manual suits for next models
1
Table of contents
Languages:
Popular Tiller manuals by other brands
MTD
MTD OHV Series Original operating instructions
YAT
YAT YT5601-01 Assembly, Use, Maintenance Manual
Craftsman
Craftsman 917.296010 owner's manual
Troy-Bilt
Troy-Bilt OEM-290-260 Operator's manual
Scheppach
Scheppach MTP560 Translation from the original instruction manual
GARDEN WAY
GARDEN WAY 12194 owner's manual
Classen
Classen STAND-AER SA-25 Operator's manual and parts list
Craftsman
Craftsman 850 Series owner's manual
DR
DR PILOT 2 Safety & Operating Instructions
Altrad
Altrad ATIKA BH 1400 N Original instructions, safety instructions, spare parts
WIL-RICH
WIL-RICH 2500 Operator's manual
Viking
Viking HB 685 instruction manual