EGi Millennium User manual

Electroacústica

General

Ibérica, S.A.

Technical Manual

Tel. +34 976 40 53 56

Index

aCables & technical data _______________________________ 2

aWhat is MILLENNIUM? Requirements and sa ety regulations ______ 3

aMILLENNIUM 2 + 1 message zones ________________________ 4

1301.x Audio Processor 5

1201 Control console 6

1501 Connection base 7

1203 Intercom unit 8

1204 2-channel 5 W control unit 9

1309.1 Ampli ier 10

aInstallation schematics (up to 127 zones) ___________________ 11

Bar 11

Fashion shop 12

Car dealer 13

Fast ood restaurant 14

Restaurant 16

Middle-size business 18

aMILLENNIUM up to 127 message zones _____________________ 20

1315 120 W Power supply 21

1316 CPU- Central audio Processing Unit 22

1101.1 Audio source preampli ied input 23

1102.1 FM tuner and preampli ied audio input 24

1103.1 Modular pre-recorded message player 25

1104.1x Phone line connection inter ace 26

1109 Telephone extension adapter 27

1110 Messaging inter ace or receiving audio signal. VOX control 28

1303.1 10 + 10 W ampli ier or independent zones 29

1304.1 1-zone 20 W ampli ier 30

1305.1 100 V 1-zone ampli ier 40 W digital control 31

1319 100 V 1-zone ampli ier 120 W digital control 31

1320 100 V 1-zone ampli ier 240 W digital control 31

1306.1 Output power stage adapter with message override relay 33

1510 General line to lat cable converter 34

1318 Relay activation module or message override 35

1509 Audio signal selection module 35

Connection speci ications 1318 and 1509 36

0801 Control so tware 38

1202 Control console 38

1202 Control console menu tree 44

1307.1 Power supply unit 46

1308.1 Bu er - Power supply unit 46

1205 4-channel 1 W control unit 47

1207 4-Channel control unit. 2W 48

1206 Digital control keyboard 49

1503 Adapter to handle digital ampli iers by push buttons 49

Connection details 50

1311 10 W Digital ampli ier 51

1310.1 20 W Digital ampli ier 52

1106 Volume regulator and aux. input 53

1105 Pre-ampli ied XLR microphone base 54

1107 Volume regulator or 1105 mic. base 54

Connection details or 1105 and 1107 55

aInstallation schematics ________________________________ 56

Sports arena. Swimming pool 56

School 58

Hotel 60

Sound rein orcement in halls with removable partitions 62

Shopping mall 63

aInstallation start up __________________________________ 64

1208 Intercom unit 67

1209 Hotel rooms control unit with 2 message zones 68

aCovers and itting boxes _______________________________ 70

a8 speaker mounting _________________________________ 71

a5 speaker mounting _________________________________ 72

a2 speaker mounting _________________________________ 73

aBa les mounting ____________________________________ 74

0605.xx Pair o high-end quality wooden ba les____________ 75

0604.xx Modular sound pojector _______________________ 76

aSpeakers deployment in the ceiling _______________________ 77

aSpeakers deployment in the ceiling _______________________ 78

aModule assembly. Accessories ___________________________ 79

millennium

OUT

+



0,3

0,6

1,3

5 W

10 W

15 W

20 W



277

166

128

370

185

110



460

275

215

1 mm21,5 mm22,5 mm2

40 W

120 W

240 W

500 W

1,5 mm2

2,5 mm2

1,5 mm2

2,5 mm2

1,5 mm2

2,5 mm2

1,5 mm2

2,5 mm2

1.200 m

2.000 m

450 m

750 m

225 m

375 m

100 m

200 m

1,5 mm2

2,5 mm2

1,5 mm2

2,5 mm2

0,75 mm2

1,5 mm2

2,5 mm2

0,75 mm2

1,5 mm2

2,5 mm2

34 m

56 m

70 m

115 m

70 m

140 m

225 m

140 m

280 m

450 m

OUT



VOLTAGE

3 V audio + 7 V

+15,5 V

0 V & audio

3 V audio + 7 V

ata

5 V (max. 15 V )

3 V audio + 7 V

7 V + audio

0 V audio / 7 V + audio

0 V audio

0 V

15 V

max. 14 V

Mr. Installer: First, we thank you for choosing our products. We hope that the

installation works perfectly and on the first try. To accomplish it, please

follow carefully the guidelines provided in this Manual.

We, for our part, have provided all our modules with the appropriate protections

so they don't get damaged even in case of a connection error. If, in spite of

everything, you have any pro lem or dou t to solve, don't hesitate to contact

our representatives or our Customer Technical Support directly. We are here

to help you.

Cables & technical data

Maximum length for audio wires 1, 5, 6, 7 & 8: 500 m. To prevent the possi ility of diaphony trou les over 500 m use alanced wires or contact our Customer

Technical Support.

GENERAL LINE 15 V (wires 2 4)

Intensity Max. length for a voltage

drop of 2,5 V (m)

Audio power

in the line

(Assuming homogeneous

speaker distri ution)

2 ohms

4 ohms

16 ohms

Total impedance Length

LOW IMPEDANCE SPEAKER LINE

Cable section

8 ohms

CABLES WITH COLOR WIRES

0,5

1 to 1,5

1,5 to 2,5

0,5

0,75 to 2,5

0,5

COLOUR

brown

brown-black

red

yellow

green

green-black

blue

blue-black

violet

violet-black

grey

grey-black

white

white-black

black

non defined

red

black/red

black

non defined

FUNCTION

Message audio w/priority over music (+ if balanced).

Message audio (- if balanced).

Power supply +15

GROUN

Channel 1 Audio: (+) if it is balanced.

Channel 1 Audio: () if it is balanced.

Channel 2 Audio: (+) if it is balanced.

Channel 2 Audio: () if it is balanced.

Channel 3 Audio: (+) if it is balanced.

Channel 3 Audio: () if it is balanced.

Channel 4 Audio: (+) if it is balanced.

Channel 4 Audio: () if it is balanced.

IGITAL channel (+) RS-485, all control signals for the system are transmitted in a codified way.

IGITAL channel () RS-485.

Wire for message priority activation using a logical signal.

Input

without priority for local connection.

Input with priority for local connection. It has priority over the IN inputs.

Audio output for local connection.

Speaker Output (+)

Speaker Output Common

Speaker Output ()

Control cable common

Keyboard information

Control of channel indicators

COLOUR

IMPORTANT: The pairs of wires: 1-10, 5-50, 6-60, 7-70, 8-80 should only be installed complete in big systems with balanced lines, from 500 m on. For smaller systems

it is enough to install wires 1, 5, 6, 7 and 8. Wires: 9-90 must always be installed.

SPEAKER OUTPUT CABLES

Num

Power Length Cable section

100 V SPEAKER LINE

DIGITAL AMPLIFIERS

1512.1: Isolation 300/500 V

(It replaces 1507.1 ca le)

1507.1LH: Isolation 450/750 V

1512: Isolation 300/500 V

(It replaces 1507 ca le)

1507LH: Isolation 450/750 V

Voltage on modules ref. 1305.1, 1319 and 1320 is 100 V.

1512 9 wires twisted cable (1 x 1.5 mm2, 1 x 1 mm2,

5 x 0.5 mm2, 2 x 0.5 mm2 - twisted pair).

1512.1 Same features as 1512 cable. It comes with cover.

1507LH 9 wires twisted cable (1 x 1.5 mm2, 1 x 1 mm2,

5 x 0.5 mm2, 2 x 0.5 mm2 - twisted pair).

Halogen free.

1507.1LH Same features as 1507.1 cable. Halogen free.

6504 Loudspeaker cable with cover 2 x 2.5 mm2.

Halogen free.

CML100V Twisted-pair cable for 100 V line (2 x 1.5 mm2).

Halogen free.

What is Millennium?

Requirements and safety regulations

is an industrial sound system that allows to control and distribute intercommunication and public-address system along an installation.

The system layout can be configured either in centralized or decentralized mode, and even mixed as the most versatile way, open to the needs of an installation.

MILLENNIUM is divided into two product ranges:

For 2+ zones: for covering up to 3 zones, designed and planned for small shops and establishments.

For larger-sized facilities, which allow to control from to 27 zones independently, from one to several control points and with a wide range of possibilities.

Installation philosophy

MILLENNIUM architecture is mainly based on one 9-wire bus ( 5 Vdc power supply included), with 4 independent audio-programmes, messages and digital

communication between its units and modules. We can add as many units/modules as desired, connected in parallel and including power supply units distributed

along the installation.

Once this concept is known, the installation can be set up in different ways: centralized or decentralized power supply, or a combination or both.

Centralized installation

In a centralized power distribution, the system management units as well as control and amplifier units are located in the same place to distribute the amplified

sound signal to the speakers in each zone. This type of distribution can be of low or high impedance. Low impedance output will be used when the loudspeakers

are relatively close to the centralization point. Transmitted power is low due to audio signal reduction along the bus-wire length. If opposite, that is remote

loudspeakers, transmitted power is high and then a high impedance installation would be advisable.

A centralized installation has all its amplifiers in the same place, however, control from other places through any 1202 control unit is allowed.

ecentralized installation

A decentralized installation is based on the audio and digital control distribution with low level signals (with less reduction or loss along the wires, which guarantees

a higher quality signal). This type of installation has the advantage of being controlled from any or several control points.

A decentralized installation must have at least one amplifier in each place where we want the sound to reach for the loudspeakers situated there. Their regulation

can be made by using local control units, from any 1202 control console available along the installation as well as from a computer (0801 software). Tha

amplifier/s and loudspeakers in each zone can play the audio programes (music and messages) shared by the whole installation as well as autonomous audio

signals generated in such zone, like microphones or audiovisual equipments on special occasions, to make the most of the electroacoustic resources.

Mixed installation

The mixed installation is the ideal installation as it allows both previous configurations, depending on the needs of the installation.

Is in this situation when MILLENNIUM enables us to combine installation areas with centralized power and other areas with decentralized power distribution.

We only have to install the appropiate MILLENNIUM units/modules, all of them interconnected through a general bus line, usually called "GENERAL LINE" so

that we can control and amplify as needed.

All the MILLENNIUM electrical elements meet the electrical safety regulations and electromagnetic compatibility (CEM ) according to the folowing guidelines:

- 73/23 EEC, modification 93/68 EEC. Low voltage guideline

- 89/366/EEC, modification 92/3 /EEC. EMC guideline

All the sound system installation devices must be connected to the same funcional 230 V~ circuit, and this will be of the exclusive use of such installation,

therefore no other electrical devices that are not part of the installation should be connected.

The mains wires section and acceptable voltage loss, etc, will be established according to the R.E.B.T. 02 criteria (UNE EN 24060).

Mains circuit will go from the electrical general panel through its respective control and protection devices (PIA), as well as overvoltage protection devices.

Regarding the MILLENNIUM sound signal conductors and wires (audio, digital data and power supply) those indicated by the manufacturer or any other that

meets at least the same constructive specifications will be used.

Conductors supplied by EGi 1507LH, 1507.1LH and CML100V to install MILLENNIUM devices comply with intrinsic safety requirements: 750 V isolation, flame-

resistant (UNE EN 50265 and UNE EN 50266), toxic and halogen fumes reduced emission (UNE EN 50267) and/or low fumes emission (UNE EN 50268).

CONTROL CONSOLE

Millennium 2 + 1 message zones

When we say 2 + 1 message zones, what we mean is that the system is able to broadcast messages in three different zones, that can be selected from

the 1201.xx control console.

Two of the zones are centralized, that is, their sound amplifiers are in the 1301.xx audio processor and their control is carried out exclusively from the

1201.xx audio console (only one control console can be present in the system).

The third area is a general line, made of a 5 V power supply line, two music programs and a message channel (5 wires in total), all these provided

from the audio processor. Various control units, amplifiers and local items (microphone preamplifiers, and so on) can be added to this general line, so

locally controlled sound areas can be created, but they work as a single, common zone for messages.

In the next pages we can see several examples of this kind of systems: bar, fashion shop, car dealer, fast-food, restaurant or middle-size company.

Product structure

AUDIO PROCESSOR SERVICE MODULES

1501.10 Connection base for control console / music source. White.

1501.12 Connection base for control console / music source. Black.

1204.10 2 channels control unit. 5 W. White.

1204.12 2 channels control unit. 5 W. Black.

1203.10 Intercom unit 2 zones. White.

1203.12 Intercom unit 2 zones. Black.

1105.10 XLR micro hone base. White.

1105.12 XLR micro hone base. Black.

1106.10 Volume regulator and auxiliary in ut. White.

1106.12 Volume regulator and auxiliary in ut. Black.

1107.10 Volume regulator for 1105 base. White.

1107.12 Volume regulator for 1105 base. Black.

1307.1 Power su ly unit 15 Vdc; 20 W; 230 V~.

1309.1 Am lifier 20 W; 230 V~.

1201 Control console

1201.11 Control Console with s eaker +

gooseneck micro hone

1301.1 Audio Processor with

built-in radio

1301.x

1 2

1301

4 W16 W

20 W

10 W

-2

32 W

8 + 8

2 + 2

16 + 16

10 W +

10 W

1301

1301.1

1301

10 W

20 W

10 W

20 W

10 W



10 W



32 11 1

12 2

LRLR

2 1

4IN 9 5 IN IN IN

Onl 1301

230 V~

51 2 4 1 2

Audio rocessor

1301.x Audio processor 2 + 1 zones

 Procesador de audio de 3 zonas ara instalaciones de sonido comerciales.

It includes a 10 + 10 W (20 W) am lifier for zone 1 and another of 10 W for zone 2, in addition of a 15 V line

out ut for the connection of control units.

 The 15 V line is ex andable.

Messages with re-warning tone and door bell in the 3 zones.

 Dual 12 Vdc , 1 A out ut for o eration of external systems.

White housing.

 FM radio tuner (only in 1301.1)

This rocessor allows you to rovide sound for facilities with 2 centralised zones lus 1 de-centralised zone (general line),

being these zones understood as the different areas which must be considered for message broadcast. Version 1301.1

incor orates a FM tuner and a dual RCA in ut for external musical sources.

NUMBER OF SPEAKERS PER LINE

Schematics

ON/OFF switch for the installation

Input for 1201 module

Phone ty e in ut RJ45 for the connection of the

1201 control console. There is also the ossibility

of connecting it internally.

Antenna input

Coaxial in ut for FM antenna. It enables the

connection of a FM antenna to im rove the

rece tion of radio stations.

Input for external music source

RCA in ut for external music sources. It enables

the connection of an external, music source

(CD, cassette layer, etc).

ZONE 2 speakers output

ZONE 1 speakers output

Onl in 1301.1

AntennaGround Terminals for external music source

Terminals for external

music sources

Ground

Connection to

1501

module

Audio in ut

to drive messages

to the control console

Out ut 2 for o eration of external systems (Relay out ut

12 V a.c.; 1 A)

In the external music source is

connected using the 1501

connection base, this in ut

should remain unused.

230 V

100 W full ower

15 V for ower su ly through general line

TECHNICAL

SPECIFICATIONS

Power su ly

Consum tion

Voltage out ut

1301  1301.1 with FM radio

20 W; min line im edance 4 W

or 10 + 10 W; min line im edance 2 W

10 W; min line im edance 8 W

Zone 1 ower

Zone 2 ower

U to 1 A nominal current (máx. 1,5 A)

External in ut 75 W (only 1301.1)

17 dB (mV)

General line

Antenna

Radio sensitivity

Zone 1Zone 2

You can use whether the double

10 W out ut or the 20 W out ut,

but never both simultaneousl .

Door bell

Audio rogram 1

Audio rogram 2 (FM radio in 1301.1)

Messages zone 3

15 V out ut

Override in ut for zone 2

; 10 W

Override in ut for zone 1

; 20 W

Ground

Out ut 1 for o eration of external systems (Relay out ut

12 V a.c.; 1 A)

10 9 7 6813 12 11 345

1201Control console

Rear view of the

1201 control

console

Su ort for wall setting

Phone connection RJ-45

Operation

It is connected with the 2+1 zones audio rocessor 1301.x

using the rovided cable with an 8-way hone connector

RJ-45, directly or using the 1501 connection base when the

distance is bigger than the su lied cable.

Operation mode

Although it de ends on the function to be controlled, the

button resses sequence is quite standardized; see it below,

classified according to the function:

MUSIC

Press the wanted zone (ZON1 or ZON2 ) and then the

music key ( ). A menu a ears showing the following

o tions:

VOL+, VOL to raise or lower the music volume.

PROGRAM to change the music source; the dis lay will

show it as /FM.

Additionally, the shortcut key TUNING can be used to

change the tuning of the radio, if this is available. When

the key is ressed, a menu will a ear with the tuned

frequency and two keys, <and> for changing it.

NOTE: Area 3, corresponding to control units connected to

the 5 V~ general line, can not be controlled from the

control console, but by the control units themselves.

MESSAGES

Press the wanted zone(s) (ZON1 , ZON2 or ZON3 )

and then the big «talk» key to issue a message.

Press the wanted zone (ZON1 , ZON2 ) and then the

message menu key ( ) to see the menu that allows the

adjustment of the message volume in that zone and for

enabling and disabling the re-warning chime.

BELL

Press the wanted zone (ZON1 , ZON2 or ZON3 ) and

then the Bell ( ) key to show the menu that allows the

adjustment of the door bell volume in that area. In area 3

it is only ossible to enable or disable the bell, as the volume

is set individually in each control unit.

LOCKS

Keys marked with a key symbol and , are shortcut

keys for o ening the electric locks.

ON-OFF

Press the wanted area (ZON1 , ZON2 ) and then the

key to turn on or off the music in installation zones

1 and 2.

NOTE: Only one 1201.xx module can be

connected in an installation.

1201 Control console for 2 + 1 areas

 Control console for 2 + 1 areas with message micro hone, keyboard and dis lay.

 It controls the music, messages, door locks and door bell in sound installations with u

to 3 zones based in 1301.x audio rocessors.

 It is o erated through menus in a 2-line, 16-character dis lay.

 It incor orates a unidirectional gooseneck micro hone for issuing messages (only in version

1201.11).

 It is connected to the rest the installation using a 8-way hone connector.

 Same features as the 1201 with built-in 2" louds eaker.

1201.1 Control console for 2 + 1 areas

 Same features as the 1201.1 with gooseneck micro hone.

1201.11 Control console for 2 + 1 areas

TECHNICAL SPECIFICATIONS

1201

15 V

80 mA

30 Hz - 11.3 KHz

Power su ly

Current consum tion (@ max. ower)

Frecuency res onse

IN 90 9110 42505

0878

0879

0877

IN 90 9110 42505 IN 90 9110 42505

Connection base 1501

1501.10 Base for connection of control console / music source. White

Connection base for connecting the 1201.x and 1202 control consoles, as well as external music sources

far from the 1301.x or 1316 audio processor.

With RC audio input for connecting an external music source to the sound installation. Mono output.

Lamp indicating signal presence.

1501.10 Base for connection of control console / music source. Black

Same features as the 1501.10 in black.

Schematics

Conection to the 1301.x or 1316

audio processor

ilot lamp for RCA signal reception

It lights when the RC connectors are receiving

an audio signal from an external music source

which is over the minimum sensitivity threshold.

Inlet for 1201.x or 1202 control consoles

RJ-45 phone-type inlet for the connection of the

1201.x or 1202 control consoles.

Inlet for external audio source

RC input for the connection of external audio

sources.

1501

connection with 6 wires

Terminal block for direct connection of 1201

control consoles to 1203 intercom units.

1501

connection with 5 wires

Connection to the 1301.x

or 1316 audio processor

5 wires

Without input for music program through

the 1501 module.

The wires "10, 90 and 50" are only used

with 1316 audio processor.

Connect only "5 and 50" if a music source

provides one of the four audio programs.

Use terminals "10 and 50" only for distances over 1500 ft. (500 m). In that cases, an audio de-balancer is also needed.

NOTE: If this input is used for the connection of an external music source, a monoaural program will be provided to the system.

This connection base is used for connecting

the 1201.x or 1202 control consoles, as well

as any external audio source to the 1301.x

or 1316 audio processor.

Both connections can be used at the same

time. The music source coming from this

module is the "1" music program.

Connection to the 1301.x

or 1316 audio processor

General line6 wires

With input for music program through

the 1501 module.

If this music program input is used, the

music source input "1" of the 1316 audio

processor must not be used.

2 3

15 V

20 KW

automatic, from 316 mV to 3.16 V

80 m

TECHNICAL S ECIFICATIONS

Power supply

Input impedance

Sensitivity of the RC input

Current consumption (@ max. power)

1501

WARNING: In case program 1 comes from RC input, make sure to connect wires 5 and 50 to the

audio processor. This input is only for program 1.

Borne no 5 will correspond to wire no 5 of the general line, if audio program

no 1 has been assigned to it. If not, it will correspond to wires 6, 7 or 8

depending on the assigned audio program.

General line

MIC INT

MIC EXT

EXT ON 1

OUT 2

OUT 1

EXT ON 1

442 OUT 1 OUT 2 MIC EXT

MIC INTMIC EXT

0891

354

G13U/161203

442 OUT 1 OUT 2 442 OUT 1 OUT 2

G13U/161203

0893

2 4 1 IN 9 5 IN3 IN1IN2

0892

1301.x

1201.x

ower supply output 15 V

Ground terminals

Outputs to a IN/IN input,

or to a speaker

Zone 1 remote ON (15 V )

External microphone input

(only electret-type)

Internal/external microphone

selection jumper

Intercom unit 1203

1203.10 2-zone intercom unit with built-in amplifier. White

2-zone intercom unit with 2 x 1.5 W built-in amplifier, separate volume setting for each zone and lock key for

keeping the zone 2 pressed.

It can be used with internal built-in ambient microphone or with an external microphone.

1203.12 2-zone intercom unit with built-in amplifier. Black

Same features as the 1203.10 in black.

ush button to select zone 1

By pressing this push button a call will be made

to zone 1. It is possible to talk to zone 1 as long

as we keep on pressing the button.

ush button to select zone 2

By pressing this push button a call will be made

to zone 2. It is possible to talk to zone 2 as long

as we keep on pressing the button.

LOCK push button

By pressing this button the zone 2 will stay

permanently selected: you can talk to zone 2

even if the push button 2 is released. red

lamp informs you that the communication with

zone 2 is permanently open. If this button is

pressed again the lock function is disabled.

Volume regulator zone 1

By turning this screw clockwise we will raise the

volume level of the message broadcast in zone 1.

Volume regulator zone 2

By turning this screw clockwise we will raise the

volume level of the message broadcast in zone 2.

Schematics

Connection of 2 intercom units

to a 1201 control console

TECHNICAL S ECIFICATIONS 1203

Continuous power supply

Power

Minimum line impedance

Push button input

Current consumption (@ max. power)

15 V

by general line

1.5 W per output

16 W

0 Vdc



15 Vdc external

200 m

Remote activation of zone 1 (15 V )

by means of an external push-button.

165

0889

8 W32 W16 W

5 W

0890

16524

8 W32 W16 W

2.5 W

2-channel control unit. 5 W 1204

1204.10 2-channel control unit. 5 W, 1-8 speakers. Message override. White

2-channel control unit, 5 W power for connecting from 1 to 8 speakers.

Digital volume regulation with 80 steps of 1 dB and loudness.

It recognizes the number of channels in the installation and adapts its selector for them.

Message override.

Unconditional message priority.

To be connected to audio processors 1301.xx only.

1204.12 2-channel control unit. 5 W, 1-8 speakers. Message override. Black

Same features as the 1204.10 in black.

ON/OFF push button

One press turns on and the next press turns off

the sound system in that zone.

Volume selector

For raising or lowering the sound level of

the control unit.

Channel selector

This push button enables the user to select the

sound channel ("1" or "2") that will be played in a

zone. Every time that it is pressed, it will change

between the available channels. The selection will

be showed by the light of a red lamp.

NOTE: The adjustment of the message volume

level is done by push-button while a

message is being received. This level is so

recorded for future use.

Schematics

1204

2 x 2.5 W outputs

over a 8 W minimum load

1204

1 x 5 W outputs

over a 16 W minimum load

General line

Common speakers output Output to speakers or to

an amplifier audio input

(IN or IN)

Up to 4 32 W speakers; 2.5 W

for each line

General line

2 32 W speakers; 5 W

NUMBER OF S EAKERS IN ARALLEL

Min impedance

16 W

TECHNICAL S ECIFICATIONS 1204

DC Power supply

High power output (+ and )

Low power output between the terminals (+ and +/) or ( and +/)

Current consumption (@ max. power)

15 V by general line

5 W; minimum line impedance 16 W

2 x 2.5 W; minimum line impedance 8 W

540 m

NUMBER OF S EAKERS IN ARALLEL

1 + 1 4 + 42 + 2

Min impedance

8 W

10 W

20 W

IN1

IN2

IN3

230 V~

230 V

Amplifier 1309.1

1309.1 20 W Amplifier with override input. 230 V~

 To be used when the audio output of another MILLENNIUM device requires whether a nigher power

or the connection with a bigger number of loudspeakers.

10 + 10 W (2 W) / 20 W (4 W) amplifier.

With 3 mixed audio inputs, one of them adjustable plus another with override.

It can be used as general line junction box.

230 V~ power supply.

Schematics

IN position

for terminal block "0" to operate

TECHNICAL S ECIFICATIONS 1309.1

Power supply

Consumption

Power

230 V

40 V

20 W; minimum line impedance 4

or 10 + 10 W; minimum line impedance 2 W

 There are three IN inputs in the amplifier. The gain of two of them is constant, while the gain of the third one is adjustable. These inputs are added (mixed) internally giving as a result

an input signal to the multiplexer.

If the audio signal reaching a IN or a IN input of this amplifier comes from a MILLENNIUM device, its origin can be a OUT output (such as those present in auxiliary input modules or

in volume regulators for microphone bases) or the + terminal of a control unit. In these cases, the micro-controller of the amplifier detects a direct voltage component (7V ) that is

transmitted together with the audio signal and it reacts to that signal by giving access to it according to the above explained priority order. This 7 V signal is typical of the MILLENNIUM

devices, except for the 1205.

 The order of priority of the amplifier inputs is the following (from higher to lower):

1) udio signals arriving at the 1 terminal block if the digital information at wires 9 and 90 confirms that there is a general call or a private message to this zone-.

2) udio signals arriving to the IN input (see below for connection of non-MILLENNIUM devices).

3) udio signals arriving to the IN inputs.

Whenever an audio signal reaches one of these inputs, all the inputs that have a lower priority level fade down and remain silent as long as the new signal is present.

 Normally non-MILLENNIUM audio sources should be connected to the sound system through their specific pre-amplifiers (1105, 1106 and 1107). If we wanted an audio signal that

does not come from a MILLENNIUM device to directly enter the amplifier, we must connect it to the IN input. In order for this signal to be detected by the IN input, a signal of 15V

must be provided to the terminal block 0, and it will have to remain present as long as we want the signal to keep being broadcast.

 Regarding the amplified output, it can be configured in two different ways: two 10 W outputs over a minimum load of 2 W each or as a single 20 W output over a minimum 4 W load.

The amplifier itself is able to detect how the speakers are connected (if connected only to the 20 W output or if distributed between the two 10 W outputs) and gets automatically self-

configured according to this.

ONLY ONE CONFIGURATION CAN BE USED.

Speakers output

Ground

Power supply output 15 V

NOT FUNCTIONAL

Terminal blocks to use the amplifier

as a junction box of the general line

Priority

audio input

Priority control input.

15 V signal here will give priority