Edsal VR400BLK User manual

Safety Instructions

These units should be placed on a level surface. Failure to do so can result in poor product performance or create a

possible safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not

included. Do not use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY

PART OF THE UNIT, OR USE IT AS A LADDER. DO NOT OVERLOAD. Evenly distribute the weight on each level

and always keep the heavier loads on the bottom. Use care when working with metal parts.

Boltless

Steel Shelving

MODEL NUMBER

VR400BLK

VR-400

D - Wood Shelf

A - Beams

B - Braces

C - Post

E - Post Coupler

VR-

-400 / VR400BLK

400 / VR400BLK

400 / VR400BLK -

-4 Shelf

4 Shelf

4 Shelf -

-60”h x 16”d x 36”w

60”h x 16”d x 36”w

Description

A - Beams

B - Braces

C - Post

D - Wood Shelf

E - Coupler

Qty.

Part Number

HMBE 3404 (GY / BLK)

HMBE 1603 (GY / BLK)

HMPT 3003 (GY / BLK)

RPB21636

HIPC0200

Part Size

34 27/32”

14 27/32”

30”

16” x 36”

2 1/2” x 7/8”

General Instructions

Assembly is done with the tabs of the beams and braces fitting into the slots of the post. A rubber mallet may be used

on the beams and braces to seat the tabs properly. A hammer can also be used, providing one uses a cloth or a block

of wood between the hammer head and the parts to prevent damage. Tap gently and be sure the tabs are straight and

fully engaged.

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel

free to contact our manufacturing facility at, (773) 475-3000 and request customer service. We can also

be reached on the internet at the following email address : customerservice@edsal.com.

To obtain replacement parts, please provide the following information :

- Model # - Part #, Description, & Color - Location Purchased - Date Purchased

Consumer Products Division

Edsal Manufacturing Company

4400 South Packers Avenue

Chicago, IL 60609 www.edsal.com

Tools Necessary For Assembly

Rubber Mallet

Note: TAP GENTLY ! A Hammer could be used

with a cloth or a wood block to protect the parts.

Assemble two (2) post with one (1) brace (see figure A). The

flat angled edge of the brace be facing up. Skipping one (1)

slot from the bottom, slide the tabs of the brace into the slots of

the post and tap down gently to properly seat (see figure B).

Repeat this process using two (2) post and one (1) brace.

Attach the assembled end units with two (2) beams (see figure

C). Again Skipping one (1) slot from the bottom, slide tabs of

the beams into post slots and tap down gently to properly seat.

Assembly Instructions for VR

Assembly Instructions for VR-

-400 & VR400BLK

400 & VR400BLK

Start by adding a wood shelf to the level previously built, then

continue working by adding the second level using two (2)

beams and two (2) braces in the post slots of your desired

location. Again slide the tabs of the beams and braces into the

post slots and tap gently to properly seat.

IMPORTANT NOTE : Make sure all beams and braces are fully seated into the post slots.

Add a wood shelf to the previously built level, then assemble

the top post to the bottom post by using eight (8) of the post

couplers. Slide the couplers tabs into the top of the bottom

post, tap gently to properly seat. Slide the top post onto the

remaining tabs of the couplers, tap the top post down to

properly seat (see figure D). Install the third level above the

post couplers, using two (2) beams, and two (2) braces.

Add a wood shelf to the previously built level, then continue by

adding the final level to the unit using two (2) beams and two

(2) braces. Tap gently to properly seat and add the final wood

shelf to the top of the unit.

Step

Figure A

Figure AFigure A

Figure A

Figure B

Figure BFigure B

Figure B

Figure C

Figure CFigure C

Figure C

Tap Lightly

Post Slot

Brace

Beam

Wood Shelf

Figure D

Figure DFigure D

Figure D

Wood Shelf

Post Coupler

Popular Tools Storage manuals by other brands

Ryobi

Ryobi RWB03 Original instructions

Husky

Husky H27CH5TR4BGK Use and care guide

Scheppach

Scheppach ts 2100 Translation from original manual

Cornwell Tools

Cornwell Tools CTB360AKBK Assembly instructions

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Assembly instruction

Cassese

Cassese CS200 CART user & parts manual

Kendall Howard

Kendall Howard ESDW-9630-1000 owner's manual

Lista

Lista Align Instructions for assembly

Workzone

Workzone 99609 Assembly instructions

Stanley

Stanley STST83800-1 instruction manual

Homak

Homak PROFESSIONAL Series Owner's manual & operating instructions

Perel

Perel ROLLER SHUTTER STORAGE CABINET Assembly instructions

Husky

Husky H5CH2R Use and care guide

BGS technic

BGS technic 4107 manual

Clarke

Clarke CWB1250 Instruction

Ryobi

Ryobi RWB02 Original instructions

Husky

Husky H52CH6HDV3WHT Use and care guide

Sealey

Sealey PTB66004 instructions