CMP375 Series
CMP375 Series – Rev. 1.1, Issue 11/07 Page 7 of 12
User's Manual
EDN GR UP S.r.l. Via Mazzini, 10/12 – 20032 – CORMANO (M ) TALY – TEL. +39 02 66305120 FAX +39 02 61540938
C NSULT TECHNICAL SALES F R M RE DETAILED DATA SHEETS R TECHNICAL MANUAL
TECHNICAL SPECIFICATI N
Input Data Reduced Power Full Power Units
Input Voltage Range 100... 185 … 274 Vac
Line Frequency 47...63 Hz
Input Current (Max value is SAE J1772 controlled ) 32 32 Aac
A sor ed Maximum Apparent Power 3840 @ 120Vac, 32Aac 7800 VA
Power Factor > 0,98
General Data Units
Protections Output over-voltage
Output over-current
Output polarity reversal
Input over-voltage
Am ient Temperature - Operating -40...+85 °C
Am ient Temperature - Full performance -25...+60
Power de-rating -4%/°C (with cold plate temperature from +60°C to +85°C)
Heat Dissipation IP55 FAN cooling
Protection Degree (enclosure) IP67
Efficiency > 90 @ from 25% to Max load %
Control interface CAN v2.0B (K it/s, STD/EXT frame and ID's adapta le)
Remote alarm Relay contacts potential free (“OR” of thermal protection, over-voltage, etc.)
Mains presence Relay contacts potential free
utputs Data Reduced Power Full Power Units
V01 Output Voltage (max) 300...750 Vdc
V01 Voltage Accuracy ± 1
V01 Output Current (max) 4,5 9,5 Adc
V01 Rated Output Power 3400 @ 120Vac, 32Aac 7200 W
V01 Parameters control CAN v2.0B
V02 Output BMS Voltage 12 Vdc
V02 Output BMS Current 0,1 Adc
V03 Output FAN Voltage 24 Vdc
V03 Output FAN Current 1,0 Adc
Standard Applied Units
General Requirements EN 61851-1, EN 61851-21, SAE J1772
EMC – Emission EN61000-3-4, CISPR 14, 16 level A
EMC – Immunity EN61000-4-1, EN61000-4-4, EN61000-4-5, EN61000-4-11, EN61000-4-3
SAFETY EN 60950-1:2002 + A11:2004, ECE regulation 100
Dielectric Withstand Voltage AC Input / P.E.:
AC Input / DC Output:
DC Output V01 / P.E.:
AC Input / SELV:
1500Vac @ 1min.
1500Vac @ 1min.
1000Vdc @ 1min.
4000Vac @ 1min.
Insulation resistance AC Input, DC Output / P.E.: > 10MΩ @ 500Vdc
Earth leakage current < 3.5 mA
Chassis Ground Stud M6
Mechanical Data Units
Dimensions: Width x Depth x Height 616 x 304 x 176,5 mm
Weight (ca.) 23 Kg
Case Material Aluminium (Black Polyester Powder Coating)
Case Type Box
I/O Connections AC Input :
V01 Power Output (to attery packs) :
Control signal and Interface :
IP67 MS Circular connectors
IP67 MS Circular connectors
IP67 MS Circular connectors
