Edimax GS-3005P User manual
GS-3005P
User Manual
11-2017 / v1.0
CONTENTS
Chapter 1 Safety and Regulatory........................................................... 4
Chapter 2 Introduction ......................................................................... 5
2-1 Overview ...............................................................................................................................5
2-2 Package contents ..................................................................................................................5
2-3 Features.................................................................................................................................6
2-4 Product Components ............................................................................................................7
2-4-1 Ports...............................................................................................................................7
2-4-2 LED Indicators................................................................................................................8
Chapter 3 Installation ........................................................................... 9
3-1 Placement Tips ......................................................................................................................9
3-2 Desktop Installation..............................................................................................................9
Chapter 4 Getting Started....................................................................10
4-1 Power...................................................................................................................................10
4-1-1 Connecting to Power...................................................................................................10
4-1-2 Connecting to the Network ........................................................................................11
4-1-3 Power over Ethernet (PoE) Considerations................................................................12
4-1-4 Starting the Web-based Configuration Utility ...........................................................13
4-1-5 Browser Restrictions ...................................................................................................13
4-1-6 Launching the Configuration Utility ...........................................................................13
4-2 Logging In.............................................................................................................................14
Chapter 5 Web-based Switch Configuration .........................................15
5-1 System Information ............................................................................................................16
5-2 Management .......................................................................................................................17
5-3 Port ......................................................................................................................................18
5-4 VLAN ....................................................................................................................................19
5-4-1 IEEE 802.1Q VLAN........................................................................................................19
5-5 Link Aggregation .................................................................................................................20
5-6 Port Mirror ..........................................................................................................................21
5-7 QoS.......................................................................................................................................22
5-7-1 Disable QoS .................................................................................................................22
5-7-2 Port-Based QoS ...........................................................................................................23
5-7-3 IEEE 802.1p QoS ..........................................................................................................25
5-8 Storm Control ......................................................................................................................27
5-9 Rate Limiting .......................................................................................................................28
5-10 Loop Detect/Prevent...........................................................................................................29
5-11 IGMP Snooping....................................................................................................................30
5-12 PoE .......................................................................................................................................31
5-12-1 PoE Port Configuration ...............................................................................................32
5-13 Password .............................................................................................................................33
5-14 Logout..................................................................................................................................33
4
Chapter 1 Safety and Regulatory
Audience
This guide is for the networking professionals in managing the standalone GS-3005P switch
series. It is recommended that only professionals with experience in Edimax networking
devices and who are familiar with the Ethernet and local area networking terminology to
service the equipment.
5
Chapter 2 Introduction
Thank you for purchasing an Edimax Gigabit Ethernet PoE+ Web managed switch device. The
Series includes both PoE and non-PoE models powered by Edimax’s Web Smart PoE and Web
Smart interface, respectively.
This document is intended to provide hardware installation instructions as well as an overview
of the interface and management functions of the Web Smart web-based software.
2-1 Overview
The GS-3005P is a PoE+ web managed switch with 5 Gigabit Ethernet ports. The 1-4 port takes
the POE function. The Giga Ethernet Switch provides a seamless network connection with
integrated 1000Mbps Gigabit Ethernet, 100Mbps Fast Ethernet and 10Mbps Ethernet network
capabilities.
2-2 Package contents
Before using the product, check that the items listed below are included and in good condition.
If any item does not accord with the table, please contact your dealer immediately.
1
2
3
4
5
6
1. GS-3005P Switch
2. Quick Installation Guide
3. CD
4. Power Cord
5. Power Adapter
6. Rubber Feet
2
3
4
5
7
1
6
5
1
6
2-3 Features
IEEE 802.3af/at PoE compliant.
Five Gigabit Ethernet ports.
Up to 30W per port (total power budget: 72W) for powering PoE-enabled devices.
Auto-detection of powered devices (PD) and power consumption levels.
Auto fault-detection on over/under current & voltage.
Access Control List (ACL) support.
Switch capacity: 10Gbps & Forwarding rate: 7.4Mpps.
IEEE 802.1Q-based VLAN for network segmentation to improve performance and security.
IEEE 802.1p QoS with 4 priority queues
IGMP Snooping V1 / V2 / V3 support.
2K MAC address table and jumbo frame support up to 9KB.
Small desktop form-factor for small office and home office
7
3
1
2
4
5
2-4 Product Components
2-4-1 Ports
The following view applies to GS-3005P.
Figure 1 GS-3005P Front View
Figure 2 GS-3005P Rear View
No.
Name
Description
1
Reset button
Press 6 seconds to restore factory default parameters.
2
Ethernet (LAN) PoE
ports (1-4)
PoE ports, compatible with IEEE 802.3af, with 60Wdedicated internal power.
3
Ethernet (LAN)
ports (1-5)
Designed to connect to network devices with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding 10/100/1000Mbps LED.
4
Power
•
Off: power off
•
On: power on
5
DC power in
Supports DC 100 –240V, 50-60Hz.
8
2
3 4
2-4-2 LED Indicators
The following view applies to GS-3005P.
Figure 3 LED Indicators
Name
Description
PWR/SYS
Green LED:
•
Off: power off or fail
•
On: power on
•
Blinking: system boot-up
POE/Alert
Green LED:
•
Off: power off or fail
•
On: power on
•
PoE power output over 50W PoE power budget
Port LED
LINK/ACT LED:
•
Off: port disconnected or link fail
•
Green on: 1000M connected
•
Amber on: 10/100M connected
•
Blinking: sending or receiving data
POE LED
POE/ACT LED:
•
Off: port disconnected or POE fail
•
Green on: POE supply status
9
Chapter 3 Installation
This chapter describes how to install and connect your Edimax Switch. Read the following
topics and perform the procedures in the correct order. Incorrect installation may cause
damage to the product.
3-1 Placement Tips
Ambient Temperature –To prevent the switch from overheating, do not operate it in an
area that exceeds an ambient temperature of 122°F (50°C).
Air Flow –Be sure that there is adequate air flow around the switch.
Mechanical Loading –Be sure that the switch is level and stable to avoid any hazardous
conditions.
Circuit Overloading –Adding the switch to the power outlet must not overload that
circuit.
Follow these guidelines to install the switch securely.
1. Put the switch in a stable place such as a desktop, to avoid it falling.
2. Ensure the switch works in the proper AC input range and matches the labeled voltage.
3. Ensure there is proper heat dissipation and adequate ventilation around the switch.
4. Ensure the switch’s location can support the weight of the switch and its accessories.
3-2 Desktop Installation
To place the switch on a desktop:
1. Install the four rubber feet (included) on the bottom of the switch.
2. Place the switch on a flat surface.
Figure 4 Desktop Installation
10
Chapter 4 Getting Started
This section provides an introduction to the web-based configuration utility, and covers the
following topics:
Powering on the device
Connecting to the network
Power over Ethernet (PoE) considerations
Starting the web-based configuration utility
4-1 Power
4-1-1 Connecting to Power
The switch is powered by the DC 100-240 V 50/60Hz internal high-performance power supply.
It is recommended to connect the switch with a single-phase three-wire power source with a
neutral outlet, or a multifunctional computer professional source.
Connect the DC power connector on the back panel of the switch to the external power
source with the included power cord, and check the power LED is on.
Power down and disconnect the power cord before servicing or wiring a switch.
Do not disconnect modules or cabling unless the power is first switched off. The
device only supports the voltage outlined in the type plate. Do not use any other
power components except those specifically designated for the switch.
Disconnect the power cord before installation or cable wiring.
Figure 5 Rear View showing DC Power Socket
Table of contents
Other Edimax Switch manuals
Edimax
Edimax ES-5500G V3 Reference guide
Edimax
Edimax ES-5500G V2 User manual
Edimax
Edimax ES-5816P User manual
Edimax
Edimax EK-PAK2 User manual
Edimax
Edimax EU-4306 User manual
Edimax
Edimax ER-5398S User manual
Edimax
Edimax USBH-004 User manual
Edimax
Edimax EK-08RO User manual
Edimax
Edimax EU-4230 User manual
Edimax
Edimax EK-16RE User manual
Edimax
Edimax ES-5424P User manual
Edimax
Edimax ES-3205P User manual
Edimax
Edimax EK-PAK2 User manual
Edimax
Edimax ES-5226RS User manual
Edimax
Edimax EK-UA2C User manual
Edimax
Edimax EK-PS2C Reference guide
Edimax
Edimax EK-UAK4 User manual
Edimax
Edimax ES-3305P V3 User manual
Edimax
Edimax 9-Port Desktop Ethernet Hub ER-5390S User manual
Edimax
Edimax ES-5500G User manual
