EDIFIER W855BT User manual
W855BT
Operating instructions
Stereo Bluetooth Headphone
®
BC
EDIFIER International Limited
Products of EDIFIER will be customized for different
applications. Pictures and illustrations shown on this
manual may be slightly different from actual product.
Picture for reference only, actual product prevails.
NOTICE:
For the need of technical improvement and system
upgrade, information contained herein may be subject
to change from time to time without prior notice.
Printed in China
www.edifier.com
2018 Edifier International Limited. All rights reserved.
Ver1.1 IB-200-W0855B-01
Note: Excessive pressure from headphones and headphones can cause hearing loss.
Before use this headphone, please carefully read this manual and keep it for your
reference.
micro USB data charging cable: 1PCS
audio cable: 1PCS
storage bag: 1PCS
Headphone type over-ear
Driver unit 40mm
Frequency response 20Hz-20KHz
Sound pressure level (SPL) 98dB
Rated impedance 32Ω
Bluetooth version Bluetooth V4.1
Bluetooth protocol HFP, HSP, A2DP, AVRCP
Effective distance 10m
Playback time Up to 19 hrs
Answering time Up to 20 hrs
Charging input 5.0V 500mA
Charging time About 3 hours
Dimension 192.4x172.5x79.8mm
Weight 238g
Frequency Band 2.402GHz - 2.480GHz
RF Power output ≤20 dBm (EIRP)
Accessories
Product introduction
Features
● 40mm large driver units create a clear and accurate Hi-Fi sound for all genres
● Bluetooth V4.1 technology with AVRCP and A2DP profile support
● Qualcomm aptX™
codec offers impressive dynamic range for wireless playback
● Built-in Lithium-ion battery offers up to 20 hours of playback
● Buttons for volume adjustment, playback control, and answering calls
● 3.5mm headphone port for alternative wired connection
● Ergonomic design with soft leather ear cups for great comfort and noise isolation
● Flexible alloy headband and clamshell case for perfect protection
1
Specifications
®
Illustration
Charging
The headphone build in a rechargeable battery, it needs fully charged at first
time use. If only red indicator blinks and has warning tone per 5 minutes,
it shows the headphone battery is in low level and you need to charge it.
1. Connect micro USB charging port on the headphone to USB power
source socket with USB charging cable included.
Red indicator steady light: charging
Red indicator off: fully charged
1
2
3
4
5
6
Adjustable headband
Left speaker
Right speaker
MFB buttons/NFC area
Volume decrease
Switch: ON/OFF/Pair
7
8
9
10
11
AUX-in input port
Status indicator
Volume increase
Microphone
Charging port
2. Charging time: it takes about 3 hours for battery fully charged.
Warning:
1. Rechargeable batteries of this product must be properly
disposed for recycling.
2. Do not put the battery into a fire, to avoid an explosion.
Operational introduction
2
How to use the headphone
ON/OFF
Function
ON
OFF
Operation
Switch to ON location
Switch to OFF location
Indicator
Blue indicator light for 1 minute
Red indicator light for 1 minute
Note: if the headphone disconnects any device after turning on, it will be in
the standby mode all the time.
Pair with Bluetooth device
How to enter pairing mode
function
Enter pairing mode
operation
Switch the switch to Bluetooth
level for about 2 seconds
Red and blue indicator
blink alternately
indicator
Note: the paring mode will keep 2 minutes, if the headphone does not pair
with any device over 2 minutes, it will automatically switch to standby mode.
Pair with mobile phone
You need to pair the headphone to your mobile phone when you are in the
first time use.
1. Keep mobile phone and headphone within 1 meter.
2.
Make the headphone enters pairing mode (see “How to enter pairing mode”).
3. Turn on the Bluetooth function on the phone, search Bluetooth devices
and select “EDIFIER W855BT”. When the connection is successful, it will
be an indicator tone and the blue indicator blinks twice every 4 seconds.
Note:
1. PIN code for connection is “0000” if needed.
2. After completing connection, headphone and phone will remember each
other. The headphone will automatically connect the latest connected
device in the next time use.
3. If the headphone can’t connect the device, press any buttons (MFB
button, volume increase button or volume decrease button), the
headphone will try to connect the latest connected device.
4. If the headphone disconnects the device due to out of the distance, it
can automatically reconnect device within 5 minutes return. If it is over
5 minutes, you need to press any buttons (MFB button, volume increase
button or volume decrease button) to connect the device.
3
NFC connection
1. Turn on the headphone and switch on the NFC function on your device.
2. Put your device to near the headphone. The Bluetooth connection will be made
automatically by NFC. Your device is now connected to the headphone.
3. Play the music on your device and adjust the volume to a desired level.
Note:
1. When the phone is in standby mode or lock the screen, you can’t use
NFC to connect the headphone.
2. When in the first time pairing, you need to make the phone touch the
headphone for longer time, take
away the phone until the
headphone into pairing mode.
3. When device disconnects the
headphone, you can use the NFC
function to connect the device.
When have connected device,
you can also use NFC function to
disconnect the device.
Pairing and connecting with multiple devices
The headphone can connect with two Bluetooth devices at the same time.
The operation is as below.
1. Firstly make the headphone pair with the first device.
2. Re-start the headphone. Enter the pairing mode and pair with the second
device.
3. Select connecting with the headphone from the first device. The
headphone has already connected with the first and second device; or
automatically connect the two devices after the headphone re-start.
Note:
● Disable pairing one headphone with two devices: When the headphone
connects with no device, press MFB button and volume decrease button
for about 2 seconds, you will hear an indicator tone.
● Enable paring one headphone with two devices: When the headphone
stands by and connects with no device, press MFB button and volume
increase button for about 2 seconds at the same time, you will hear an
indicator tone.
● If you only need to connect with one phone, we suggest you to disable
pairing one headphone with two devices in order to improve the
headphone’s performance.
4
How to use headphone to answer calls
Basic answering operation
Functions
Cancel a call
Answer a call
Reject a call
End a call
Increase volume
Decrease volume
Transfer call to mobile
Transfer call to headphone
Microphone muted
Headphone status
Calling
Incoming a call
Incoming a call
Answering
Answering
Answering
Answering
Answering
Answering
Operation
Press button once
Press button once
Press and hold button about 2 seconds
Press button once
Press volume increase button once
Press volume decrease button once
Press and hold button about 2 seconds
Press and hold button about 2 seconds
Press and hold volume increase button about 2 seconds
Press and volume increase button at the same time
Double click button
Note:
● When the headphone volume is set to its maximum, you will hear an
indicator tone.
● When the headphone is in mute status, you will hear the “beep” prompts
every 10 seconds.
● For some mobiles, the call will be transferred prior to the mobile when the
answer call button on the mobile is pressed. Now you can use the
headphone’s call switch or operate on your mobile to switch the call to the
headphone. Please refer to your mobile manual for the details.
● When you use voice dial, please ensure that your mobile phone supports
this function and turn it on.
Three party call operation
Answer new incoming call
and end the current call
Answer new incoming call
and end the current call
Function
Switch call
End the current call and
switch to the hold call
Headphone status
Incoming the second call
Incoming the second call
Double click button
Answering (hold) Double click button
Answering (hold)
Operation
Press button once
Press button once
5
Mute off
Voice dial
Last number redial
Answering
(Microphone muted)
Device connected
Device connected
Press and hold volume increase button about 2 seconds
Connect call from two mobiles
Function Headphone status Operation
End the first mobile call and answer
the second incoming call
Hold the first mobile call and answer
the second incoming call
Switch call
End the current call and back to the
hold mobile call
The first call is answering and
there is another incoming call Press button once
The first call is answering and
there is another incoming call
Answering while one call is held
Answering while one call is held
Double click button
Double click button
Press button once
Increase volume
Decrease volume
Previous track
Next track
Pause
Resume
Play music
Play music
Play music
Play music
Play music
Pause music
Press volume increase button
Press volume decrease button
Press and hold volume decrease button
Press and hold volume increase button
Press button once
Press button once
Function Headphone status Operation
Play music
Bluetooth audio mode
When the headphone has connected to the mobile phone that supports
A2DP protocol, you can enjoy wireless music by the headphone.
Note:
● When the headphone volume is maximized, you will hear an indicator
tone.
● The remote play controls function (Previous/Next/Pause/Resume) require
your mobile supports AVRCP protocol.
AUX in audio mode
This headphone supports AUX in audio input, as the figure shows, you can
connect the headphone to player with 3.5mm audio cable for enjoying music.
6
USB audio mode
This headphone can connect to PC by USB data cable to listen to the
music on the PC.
Note:
1. Only the USB data cable with data transmission can connect to PC for
playing.
2. When connect to PC in the first time, the music maybe not directly output
from PC, you need to set the audio output to the headphone on PC.
Indicator lights
The red and blue light blinks alternatively
The blue light blinks once every 2 seconds.
The blue light blinks twice every 4 seconds.
The red light blinks
Headphone status
Pairing
Device disconnected
Device connected
Low power level
Meaning of indicator lights
Note:
1. When you insert the 3.5mm audio cable, the headphone will turn off and
Bluetooth connection will automatically disconnect, only effective with
AUX inaudio input.
2. If you want to use Bluetooth function, please plug out the 3.5mm audio
cable, re-start and pair again.
7
Maintenance and repair
During usage, please read the following suggestions which would help you
follow the warranty terms and make the product life longer.
● Keep the product dry and far from any damp places in order to avoid the
affect on the product’s internal circuit. You should avoid using the product
during intense exercise or when you sweat too much.
● Do not place the product directly under the sun or where the temperature
is high. High temperature will shorten the electronic components’ life and
damagebatteries.
● Do not put the product at very cold places in order to prevent its internal
circuit board from being damaged.
● Do not dismantle the product. Non-technician may damage the product.
● Do not drop, violently vibrate or strike the product with hard items in order
to prevent its internal circuit from being damaged.
● Do not use strong chemical products or detergent to clean the headphone.
● Do not use any sharp items to scratch the product surface in order to
prevent its casing from being damaged. and its outlook from being affected.
If the product cannot work properly, please send it to your qualified service
organizations. The staff shall help you with their whole heart.
Note:
After the factory settings are restored, the paired list of the headphone will
be deleted. The headphone will automatically enter the pairing mode after
turning on.
The headphone will not automatically connect any device. If the headphone
needs to connect any device, the new pairing is required.
Restore factory settings
Turn off the headphone, press and hold volume increase button about
3 seconds while charging and release the button when the red and blue
light blinks at the same time. Meanwhile you will hear an indicator tone.
8
Other manuals for W855BT
1
Table of contents
Other EDIFIER Headphones manuals
EDIFIER
EDIFIER X2s User manual
EDIFIER
EDIFIER W320TN User manual
EDIFIER
EDIFIER TWS2 User manual
EDIFIER
EDIFIER W285BT User manual
EDIFIER
EDIFIER TWS1 Pro User manual
EDIFIER
EDIFIER W830BT User manual
EDIFIER
EDIFIER W800BT Plus User manual
EDIFIER
EDIFIER W860NB User manual
EDIFIER
EDIFIER W210BT User manual
EDIFIER
EDIFIER Xemal X3s User manual
EDIFIER
EDIFIER TWS330 NB User manual
EDIFIER
EDIFIER W830BT User manual
EDIFIER
EDIFIER WH500 User manual
EDIFIER
EDIFIER TO-U6+ User manual
EDIFIER
EDIFIER Xemal X3s User manual
EDIFIER
EDIFIER W330NB User manual
EDIFIER
EDIFIER TWS330 NB User manual
EDIFIER
EDIFIER W675BT User manual
EDIFIER
EDIFIER W845NB User manual
EDIFIER
EDIFIER Xemal X2 User manual
