EDIFIER TWS6 User manual
www.edifier.com
TWS6
True Wireless Earbuds with Balanced Armature Drivers
EN · Product Description and Accessories
There are different size of ear tips attached in the package, please select
the suitable ones to wear.
Note: Images are for illustrative purposes only and may differ from the
actual product.
LED light
Touch button
USB charging cable
Pairing button
Silicone ear tipsMemory foam ear tips Earwings
■ Wearing Instructions
● How to wear earwings
Keep earbud and earwing
in the same direction
Put the earwing
over the earbud
Pinch memory foam ear tip
and put it over the earbud
Fix the earbud by hand and release
until the memory foam ear tip rebounds
Put the ear tip
over the earbud
● How to wear memory foam ear tips
■ User Guide
● Charge the Earbuds
•You may hear a warning tone when at low battery level, please
charge the earbuds.
•Charging: place the earbuds in the charging case
Charging time: about 1.5 hours for a full charging
LED light flashing in a breathe pattern=charging
LED light off=fully charged
Warning: The rechargeable batteries that provide power for this product
must be disposed properly for recycling. Do not dispose of batteries in
fire to prevent an explosion.
If the product with lithium battery is not used for long periods of time,
please charge the product at least once per three months.
● Charge the Charging Case
Every time when the charging case is opened, the flashing times of
indicator light on its bottom mean the times that the earbuds can be
charged; if the indicator light flashes rapidly, it means the charging
case has a low battery capacity, please charge the case in time.
LED light flashing = charging LED light off = fully charged
Rated input: 5V 55mA(earbuds) 5V 500mA(charging case)
Wireless chargingWired charging
● Power ON/OFF
•Power on automatically when taken out from the charging case;
•Power off automatically while placed in the charging case.
● TWS Pairing of the Left and Right Earbuds
The left and right earbuds have finished TWS pairing before leaving
factory. If the wireless connection fails to resume, please follow the
steps below to re-pair:
•
Place the earbuds in the charging case, then press and hold the pairing
button for 8 seconds to enter TWS pairing state, the LED light flashes
rapidly;
•After pairing is done, blue lights of both earbuds flash slowly.
● Bluetooth Connection
•Open the charging case, then press and hold the pairing button to
enter pairing state, the LED light flashes rapidly;
•
Set mobile phone to search for and connect to either “EDIFIER TWS6 L”
or “EDIFIER TWS6 R”, after pairing is successful, the LED light flashes
slowly.
•You can choose to use one earbud or both earbuds.
■ Functional Operation Instructions
● Music Playback
● Call (same operation for the left and right earbuds)
•Clear pairing records: Whether the charging case is being
charged or not, open the case and place the earbuds in it,
then press and hold the pairing button for approx. 10 seconds
to clear pairing records.
Pause/play:
double click
the right
earbud
Accept a call: double click
End a call: double click
Voice assistant:
double click
the left earbud
LED light is o during charging.
•
Please ensure the earbuds are correctly placed in the charging case.
•
When the earbuds have not been used for long periods of time, the
battery will enter sleep state, it needs to charge about 30 minutes and
then the light will be lit.
No sound
•
Check if the earbuds are operating.
•
Check if the earbuds volume are at an appropriate level.
•
Check if the earbuds are correctly connected with mobile phone.
•
Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
•
Check if mobile phone is in an area with strong signal.
•
Please ensure the earbuds are within effective distance (10m) and no
obstacle between the earbuds and mobile phone.
When playing music, cannot control pause/play via the earbuds.
•
Please ensure the paired device support
AVRCP (Audio Video Remote
Control Profile) profile.
■ FAQs
•Keep the product away from humid places to avoid affecting internal
circuit. Do not use the product during intense exercise or with much
sweat to prevent sweat from dropping into the product to make
damage.
•Do not put the product in places exposed to sun or with high
temperature. High temperature will shorten service life of electronic
components, damage battery and make plastic components deformed.
•Do not put the product in cold places to avoid damaging internal
circuit board.
•Do not dismantle the product. Non-professional personnel may
damage the product.
•Do not drop, strongly vibrate, strike the product with hard object to
avoid damaging internal circuit.
•Do not use drastic chemicals or cleaner to clean the product.
•Do not use sharp objects to scratch product surface to avoid
damaging shell and affecting facade.
■ Maintenance
Other manuals for TWS6
1
Table of contents
Other EDIFIER Headphones manuals
EDIFIER
EDIFIER W800BT User manual
EDIFIER
EDIFIER Xemai X3 Lite User manual
EDIFIER
EDIFIER Xemal X6 User manual
EDIFIER
EDIFIER W860NB User manual
EDIFIER
EDIFIER W200T mini User manual
EDIFIER
EDIFIER TWS200 Plus User manual
EDIFIER
EDIFIER W675BT User manual
EDIFIER
EDIFIER TWS NB User manual
EDIFIER
EDIFIER TWS2 User manual
EDIFIER
EDIFIER Xemal X3s User manual
EDIFIER
EDIFIER WH500 User manual
EDIFIER
EDIFIER W800BT User manual
EDIFIER
EDIFIER Xemal X3 User manual
EDIFIER
EDIFIER W830BT User manual
EDIFIER
EDIFIER W330NB User manual
EDIFIER
EDIFIER TWS NB5 User manual
EDIFIER
EDIFIER Xemal X User manual
EDIFIER
EDIFIER TWS5 User manual
EDIFIER
EDIFIER TWS NB2 Pro User manual
EDIFIER
EDIFIER Hecate Gm5 EDF700006 User manual
