2
RECEIVING YOUR NEW PTAC CLEANING
CRADLE: When your package is delivered, check
the carton carefully for signs of rough handling. If your
CRADLE is damaged, notify the carrier immediately and
request an inspection. Be sure to keep the carton, packing
inserts, packing lists and carrier’s receipt until the inspec-
tor has veried your claim.
EDIC’s liability ceases when the carrier picks up the ship-
ment. However, our customer service sta will be happy
to furnish any information needed in connection with
the claim and will attempt to expedite a resolution.
PLEASE READ BEFORE OPERATING YOUR
NEW CRADLE:
Read the manual carefully and completely before at-
tempting to operate the unit. is manual has important
information for the use and safe operation of the ma-
chine. Keep this manual handy at all times.
is equipment has been engineered and manufactured
to provide excellent performance and service. To ensure
that your equipment will continue to perform as intend-
ed:
• Maintain equipment regularly- following the suggest-
ed maintenance schedule provided.
• Use only original EDIC parts when servicing.
• Operate equipment with care.
If additional information is needed, please contact:
EDIC
800-338-3342
All information and specications printed in the man-
ual are current at the time of printing; however because
of EDIC’s policy of continual product development, we
reserve the right to make changes at any time without
notice.
FAILURE TO COMPLY WITH THE FOL-
LOWING WARNINGS AND INSTRUCTIONS
WILL VOID THE WARRANTY AND CAN
CAUSE POTENTIALLY HAZARDOUS
CONDITIONS.
WARNING!
• PTAC units must be unplugged before being placed
into the CRADLE
• e machine was designed for cleaning PTAC units
as per instructions and recommendations written
in this manual. Any deviation from its proper use
or purpose and the consequential damage that may
occur is the sole responsibility of the end user.
• Always read and understand your chemical’s MSDS
(Material Safety Data Sheet) before use.
• the CRADLE and the PTAC unit are heavy. Use prop-
er liing techniques to accomodate equipment. ask
for assistance if something is too heavy.
• Pay attention to your ngers and body parts when
sliding the PTAC into the cradle and back into the
wall sleeve.
• is equipment is not designed to handle or use
combustible/volatile substances such as gasoline or
kerosene, in, on, or near the machine. e use of such
materials will cause extreme hazardous condition.
• is is not a toy. Do not allow children or pets in, on,
or near this equipment.
• Use appropriate PPE including eye protection, a
breathing mask is suggested.
