Edgetech 6205S2 User manual

EdgeTech

4 Little Brook Road

West Wareham, MA 02576

Tel: (508) 291-0057

Fax: (508) 291-2491

www.EdgeTech.com

6205S2 BATHYMETRY & SIDE SCAN SYSTEM

USER HARDWARE MANUAL

0025262_REV_A 5/26/2022

6205s2 BATHYMETRIC AND SIDE SCAN SONAR 0025262_REV_A

The information, figures, and specifications in this manual are proprietary. They are issued in strict

confidence on the condition that they not be copied, reprinted, or disclosed to a third party, either wholly

or in part, without the prior written consent of EdgeTech. Any reproduction of EdgeTech-supplied

software or file sharing is strictly prohibited.

Microsoft® and Windows® are registered trademarks of Microsoft Corporation.

Getac® is a registered trademark of MiTAC-Synnex Group.

HYPACK® and HYSWEEP® are registered trademarks of Hypack, Inc.

SonarWiz® is a registered trademark of Chesapeake Technologies Inc.

CARIS® is a registered trademark of Teledyne Caris.

EIVA NaviSuite® is a registered trademark of Eiva.

QINSY® is a registered trademark of QPS.

Applanix POSMV® is a registered trademark of Applanix.

Ekinox® and Apogee® are registered trademarks of SBG Corporation.

BEAMWORX® is a registered trademark of BeamworX B.V.

LMR® is a registered trademark of Times Microwave Systems.

Loctite®is a registered trademark of the Henkel Corporation.

SKB® is a registered trademark of the MEI Research Corporation.

iii

ATTENTION – READ THIS FIRST!

Warnings, Cautions, and Notes

Where applicable, warnings, cautions, and notes are provided in this manual as follows:

WARNING! Identifies a potential hazard that could cause injury or

death.

CAUTION! Identifies a potential hazard that could damage equipment or

data.

NOTE: Recommendations or general information that is particular to the

presented material.

All personnel involved with the installation, operation, or maintenance of the equipment described in this

manual should read and understand the warnings and cautions provided below.

CAUTION! This equipment contains devices that are extremely sensitive

to static electricity. Therefore, extreme care should be taken when

handling them. Normal handling precautions involve using anti-static

protection materials and grounding straps for personnel.

WARNING! High Voltage may be present in all parts of the system.

Therefore, use caution when the electronics are removed from their

containers for servicing.

CAUTION! Operation with improper line voltage may cause serious

damage to the equipment. Always ensure that the proper line voltage is

used.

6205s2 BATHYMETRIC AND SIDE SCAN SONAR 0025262_REV_A

HARDWARE VARIATIONS AND COMPATIBILITY

The 6205s2 Bathymetry & Side Scan System contains both standard and proprietary hardware. At times,

EdgeTech may change the standard components due to their availability or performance improvements.

Although the component manufacturers and their models and styles may change from unit to unit,

replacement parts will generally be interchangeable.

EdgeTech will make every effort to see that replacement components are interchangeable and use the

same software drivers (if applicable). At times, however, direct replacements may not exist. EdgeTech will

provide the necessary drivers with the replacement part when this happens.

EdgeTech may also change certain hardware per customer requirements. Therefore, portions of this

manual, such as parts lists and test features, are subject to change. These sections should be used for

reference only. When changes are made that affect system operation, they will be explicitly noted. Also,

some options and features may not be active in the customer's unit at the time of delivery. Upgrades will

be made available when these features are implemented.

Contact EDGETECH CUSTOMER SERVICE with any questions relating to compatibility.

ABOUT THIS DOCUMENT

We, the employees at EdgeTech, would like to thank you for purchasing a 6205s2 system. At EdgeTech,

our policy is to provide high-quality, cost-effective products and support services that meet or exceed

your requirements. We also strive to deliver them on time and continuously look for ways to improve

them. We take pride in the products we manufacture and want you to be entirely satisfied with your

equipment.

Purpose of this Manual

The purpose of this manual is to provide the user with information on the setup and use of EdgeTech's

6205s2 Bathymetry & Side Scan System. Although this manual encompasses the latest operational

features of the 6205s2, some features may be periodically upgraded. Therefore, the information in this

manual is subject to change and should be used for reference only.

Liability

EdgeTech has made every effort to document the 6205s2 Bathymetry & Side Scan System. However,

EdgeTech assumes no liability for errors or any damages resulting from the use of this manual or the

equipment it documents. EdgeTech reserves the right to upgrade this equipment's features and make

changes to this manual without notice at any time.

Revision History

REVISION

DESCRIPTION

DATE

APPROVAL

Release to Production

5/26/2022

6205s2 BATHYMETRIC AND SIDE SCAN SONAR 0025262_REV_A

WARRANTY STATEMENT

All equipment manufactured by EdgeTech is warranted against defective components and workmanship

for a period of one year after shipment. Warranty repair will be done by EdgeTech free of charge.

Shipping costs are to be borne by the customer. Malfunction due to improper use is not covered in the

warranty, and EdgeTech disclaims any liability for consequential damage resulting from defects in the

equipment's performance. No product is warranted as fit for a particular purpose, and there is no

merchantability warranty. This warranty applies only if:

i. The items are used solely under the operating conditions and in the manner recommended in the

seller's instruction manual, specifications, or other literature.

ii. The items have not been misused or abused in any manner, nor have repairs been attempted

thereon without the approval of EDGETECH CUSTOMER SERVICE.

iii. Written notice of the failure within the warranty period is forwarded to the seller, and the

directions received for properly identifying items returned under warranty are followed.

iv. The return notice authorizes the seller to examine and disassemble returned products to the

extent Seller deems necessary to ascertain the cause for failure.

The warranties expressed herein are exclusive. There are no other warranties beyond those, either

expressed or implied herein. The seller does not assume any other obligation or liability in connection

with the sale or use of said products. Any product or service repaired under this warranty shall only be

warranted for the remaining portion of the original warranty period.

Equipment not manufactured by EdgeTech is supported only to the extent of the original manufacturer's

warranties.

vii

SOFTWARE SERVICE OVERVIEW

EdgeTech provides software services free of charge. This software agreement does not address customer-

specified modifications or enhancements. These services may be ordered separately. Furthermore,

EdgeTech software upgrades are meant for the sole use of EdgeTech customers. Any reproduction of

EdgeTech-supplied software or file sharing is strictly prohibited.

Software Updates and Enhancements

EdgeTech customers can download new software releases with all modifications and enhancements by

contacting EDGETECH CUSTOMER SERVICE. Major software issues, should they occur, will be reported directly

to the customer. New software releases consist of the following:

•Software enhancements that are not on the price list

•Software fixes and changes

•Product integration

•Documentation updates to online help

•Tests for compatibility with other modules

Software patches consist of software that has undergone the following:

•Minor software enhancements

•Software fixes and changes

EdgeTech customers are entitled to contact EDGETECH CUSTOMER SERVICE by telephone, facsimile, or e-mail

to report a difficulty, discuss a problem, or receive advice on the best way to perform a task. When

contacted, EDGETECH CUSTOMER SERVICE will do the following:

•Respond within 24 hours via Telephone, Facsimile, and E-mail Support

•Immediately attend to serious problems affecting operations

•Attempt to find an immediate workaround

viii

6205s2 BATHYMETRIC AND SIDE SCAN SONAR 0025262_REV_A

RETURNED MATERIAL AUTHORIZATION

Prior to returning any equipment to EdgeTech, a Returned Material Authorization (RMA) Number must

be obtained from CUSTOMER SERVICE.

RMA Purpose

The RMA Number identifies returned equipment when it arrives at our receiving dock and enables tracking

while at our facility. Refer to the RMA number on all documentation and correspondences.

All returned materials must be shipped prepaid. Freight collect shipments will not be accepted. All

equipment should be adequately insured for shipping, but equipment belonging to EdgeTech must be

insured for full value.

If there is more than one item per consignment, include a packing with the shipment. An invoice can

double as a packing slip only when the contents are clearly numbered and identified on the invoice.

CAUTION! Never attempt to ship a topside unit in its SKB® case alone.

Although rugged, these cases are not intended to be used as shipping

containers, and the delicate internal components could be damaged.

Shipping in this manner will void any warranties.

NOTE: All shipping charges shall be the customer's responsibility, unless

under warranty, as EdgeTech will pay for return shipping.

NOTE: For International Shipments valued over $1000, the following

Shipper's oath must be sent with the invoice.

Shipper's Oath:

"I, ______________________________, declare that the articles herein specified are the growth,

produce, or manufacture of the United States; that they were exported from the

United States from the port of _____________________, on or about _______________; that they

are returned without having been advanced in value or improved in condition by any

process of manufacture or any other means; and that no drawback, or allowance has

been paid or admitted hereof."

Signed ______________________________

CUSTOMER SERVICE

Customer service personnel at EdgeTech are always eager to hear from users of our products. Your

feedback is welcome and is a valuable source of information that we use to improve these products.

Therefore, we encourage you to contact EdgeTech Customer Service to offer any suggestions or to request

technical support:

NOTE: Have your system Serial Number available when contacting

Customer Service.

E-mail: service@edgetech.com

Mail: 4 Little Brook Road

West Wareham, MA 02576

Telephone: (508) 291-0057

Fax:(508) 291-2491

24-Hour Emergency

Technical Support Line: (508) 942-8043

For more information, go to WWW.EDGETECH.COM.

6205s2 BATHYMETRIC AND SIDE SCAN SONAR 0025262_REV_A

COMPANY BACKGROUND

EdgeTech (formerly EG&G Marine Instruments) traces its history in underwater data acquisition and

processing back to 1966. EdgeTech has designed, developed, and manufactured products, instruments,

and systems for the acquisition of underwater data—including marine, estuarine, and coastal

applications—for over 50 years.

The company has responded to the scientific, Naval, and offshore communities' needs by providing

equipment—such as sub-bottom profilers, side-scan sonar, acoustic releases, USBL positioning systems,

and bathymetric systems—that have become standards in the industry.

EdgeTech has also consistently anticipated and responded to future needs through an active research and

development program. Current efforts are focused on the application of cutting-edge CHIRP and acoustic

technology.

Other manuals for 6205S2

Table of contents

Other Edgetech Marine Equipment manuals

Edgetech

Edgetech 8011M User manual

Edgetech

Edgetech Port Pop-Up User manual

Edgetech

Edgetech STARMUX IV User manual

Edgetech

Edgetech 8242XS User manual

Edgetech

Edgetech 4380 MULTIBEACON User manual

Edgetech

Edgetech 4200-FS User manual

Edgetech

Edgetech 4125I User manual

Edgetech

Edgetech 2050-DSS User manual

Edgetech

Edgetech 701 DIGITAL LINK User manual

Edgetech

Edgetech 3300 User manual

Edgetech

Edgetech 3200-XS User manual

Edgetech

Edgetech 3400 User manual

Edgetech

Edgetech 3100 User manual

Edgetech

Edgetech 3400 User manual

Edgetech

Edgetech STARMUX IV User manual

Edgetech

Edgetech 3200-XS User manual

Edgetech

Edgetech 2300 User manual

Edgetech

Edgetech Model 3100P Sub-bottom Sonar System User manual

Popular Marine Equipment manuals by other brands

Clarion

Clarion CMS2 Owner's manual & installation manual

EBS

EBS M7000 installation manual

Kongsberg

Kongsberg M3 Bathy installation manual

NPK

NPK SCS-1002 operating manual

Furuno

Furuno FE-800 installation manual

Harken

Harken 1561 instructions

Simrad

Simrad DD15 manual

Notifier

Notifier FS-BSO Installation and maintenance instructions

Raymarine

Raymarine ST40 Quick reference guide

E2S

E2S E2XS112UL Instructions/service manual

R2Sonic

R2Sonic 2026 Operation manual

COBHAM

COBHAM SAILOR 6000 installation manual

Clarion

Clarion GR10BT Owner's manual & installation manual

Raymarine

Raymarine Maxiview ST80 Owner's handbook

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Installer's guide

Raymarine

Raymarine ST60 Tridata Owner's handbook

olympia electronics

olympia electronics ΒS-531/1/MAR quick start guide

Sonic

Sonic 2024 Operation manual