Edge-Core MLTG-360 User manual

User Manual

www.edge-core.com

Terragraph Distribution Node

MLTG-360

User Manual

MLTG-360

Terragraph-certified distribution node

E122021-MR-R03

– 3 –

How to Use This Guide

This guide includes detailed information on MLTG-360 software, including how to

operate and use the management functions of the device. To deploy it as part of a

Terragraph network or as a wireless bridge and effectively ensure trouble-free

operation, you should first read the relevant sections in this guide so that you are

familiar with all software features.

Who Should Read This

Guide?

This guide is for network administrators who are responsible for operating and

maintaining network equipment. The guide assumes a basic working knowledge of

LANs (Local Area Networks) and the Internet Protocol (IP).

How This Guide is

Organized

The organization of this guide is based on the MLTG-360’s web management

interface. An introduction and initial configuration information is also provided.

The guide includes these sections:

◆Section I “Getting Started” — Includes an introduction to MLTG-360

management and initial configuration settings.

◆Section II “Web Configuration” — Includes all management options available

through the web browser interface.

◆Section III “Appendices” — Includes information on specifications,

configuration examples, and troubleshooting the device.

Documentation

This guide focuses on the MLTG-360’s software configuration, it does not cover

hardware installation of the MLTG-360.

For information on how to install the MLTG-360 and all safety information and

regulatory statements, see the following document:

Quick Start Guide

Conventions The following conventions are used throughout this guide to show information:

Note:

Emphasizes important information or calls your attention to related features

or instructions.

How to Use This Guide

– 4 –

Caution:

Alerts you to a potential hazard that could cause loss of data, or damage

the system or equipment.

Warning:

Alerts you to a potential hazard that could cause personal injury.

Contact If you have further questions, please submit a ticket at: https://support.edge-

core.com/hc/en-us or send us an email: ecwifi@edge-core.com.

Revision History This section summarizes the changes in each revision of this guide.

December 2021 Revision

This is the third version of this guide. This guide is valid for software release v1.2.0.

July 2021 Revision

This is the second version of this guide. This guide is valid for software release

v1.1.1.

April 2021 Revision

This is the first version of this guide. This guide is valid for software release v1.0.3.

– 5 –

Contents

How to Use This Guide 3

Contents 5

Figures 7

Tables 8

Section I Getting Started 9

1 Introduction 10

Terragraph Network 10

Connecting to the Web Interface 11

Section II Web Configuration 13

2 Dashboard 14

System 14

Network 16

Topology 17

3 Management 19

Network Configuration 19

Management 19

Admin Account 20

Password Configuration 20

PoE Out 21

4 Operation Mode 22

Operation Mode 22

E2E Controller 22

Contents

– 6 –

IPv6 addressing and physical port assignment on the POP node 23

5 Topology 27

Node Setting 27

Configure Nodes (DN) 28

Interface 28

PoE Out 29

General 29

Radio 30

Discover Nodes 31

Link Setting 31

6 System 33

General Settings 33

Time 33

Failure Recovery 33

SNMP 34

Maintenance 35

System Actions 35

Firmware Upgrade 35

Radio Sectors 36

Section III Appendices 37

A Specifications 38

Specifications 38

B Troubleshooting 39

Access and Operational Issues 39

– 7 –

Figures

Figure 1: Example of a Terragraph Network 10

Figure 2: Login 12

Figure 3: System Dashboard 14

Figure 4: Position of Radios 15

Figure 5: Network Dashboard 16

Figure 6: Topology Dashboard 17

Figure 7: Management IP Address Mode 19

Figure 8: Admin Password Configuration 20

Figure 9: PoE Out 21

Figure 10: POP Configuration 23

Figure 11: Terragraph Operation Mode 24

Figure 12: Enable BGP 26

Figure 13: Topology Nodes 27

Figure 14: DN Interface Configuration 28

Figure 15: DN PoE Out Configuration 29

Figure 16: DN General Configuration 29

Figure 17: DN Radio Configuration 30

Figure 18: Node Discovery Result 31

Figure 19: Link Setting Terragraph Mode 32

Figure 20: General Settings 33

Figure 21: Maintenance 35

Figure 22: Radio Sectors 36

– 8 –

Tables

Table 1: Product lineup 15

Table 2: IPv6 Prefix Length and Nodes Supported 25

Table 3: Hardware Specifications 38

Table 4: Troubleshooting Chart 39

– 9 –

Section I

Getting Started

This section provides an overview of the device, and introduces some basic

concepts about Terragraph networks. It also describes the basic settings required to

access the management interface.

This section includes these chapters:

◆"Introduction" on page 10

– 10 –

1Introduction

Terragraph Network

Terragraph is a 60GHz, multi-node wireless Software Defined Network (SDN) that

enables high-speed Internet connectivity in multiple environments. The network

operates best in Line-Of-Sight (LOS) conditions to maximize connectivity.

Terragraph is a distribution-level network designed to augment and expand a fiber

optic network. That is, Terragraph is a high-speed backbone network to which

other networks are connected. When combined with fixed access connections or

Wi-Fi access points, Terragraph is a simple and easy-to-install solution to achieve

street-level coverage with high speeds.

A Terragraph network is composed of individual nodes. There are two types of

nodes in a Terragraph network – Distribution Nodes (DNs) such as the MLTG-360,

and Client Nodes (CNs) such as the MLTG-CN. DNs are the backbone of the

Terragraph network that distribute Internet connectivity from one or more fiber

optic Points of Presence (PoPs) over multiple hops to CNs. DNs and CNs are

connection points for client networks, wireless access points, and other customer

premise equipment (CPE) to connect to the Internet.

Figure 1: Example of a Terragraph Network

Other manuals for MLTG-360

Table of contents

Other Edge-Core Wireless Access Point manuals

Edge-Core

Edge-Core EAP101 User manual

Edge-Core

Edge-Core OAP6626A User manual

Edge-Core

Edge-Core EAP2316A User manual

Edge-Core

Edge-Core ECWO5213-L User manual

Edge-Core

Edge-Core EAP102 User manual

Edge-Core

Edge-Core ECWO3220 Programming manual

Edge-Core

Edge-Core EAP101 User manual

Edge-Core

Edge-Core WA4101-Cradle User manual

Edge-Core

Edge-Core OAP100e User manual

Edge-Core

Edge-Core EAP111 User manual

Edge-Core

Edge-Core OAP101 User manual

Edge-Core

Edge-Core EAP102 User manual

Edge-Core

Edge-Core EAP104 User manual

Edge-Core

Edge-Core ECWO5110-L User manual

Edge-Core

Edge-Core ECW7220-L User manual

Edge-Core

Edge-Core EAP101 User manual

Edge-Core

Edge-Core ECW7211-L User manual

Edge-Core

Edge-Core ECW7210-L User manual

Edge-Core

Edge-Core Spark SP-W2-AC1200 User manual

Edge-Core

Edge-Core ECW5110-L User manual

Edge-Core

Edge-Core ECW7212-L User manual

Edge-Core

Edge-Core ECWO4320 User manual

Edge-Core

Edge-Core ECW5410-L User manual

Edge-Core

Edge-Core ECW5210-L User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide