Edge-Core ECS4130-28T User manual
– 1 –
Quick Start Guide
E042021-MR-R01
150200002371A
www.edge-core.com
28-Port Gigabit Switch
ECS4130-28T | ECS4130-28T-DC
1.
ECS4130-28T or ECS4130-28T-DC
2. Rack mounting kit — 2 brackets and 8 screws
3. Console cable — RJ-45 to D-Sub
4. Power cord (ECS4130-28T only)
5. DC connector plug (ECS4130-28T-DC only)
6. Adhesive foot pads
7. Documentation — Quick Start Guide (this document) and Safety
and Regulatory Information
12
4
35
1. 24 x RJ-45 1 GbE ports
2. 4 x SFP+ 10 GbE ports
3. RJ-45 Console port
4. USB Management port
5.
AC power socket (ECS4130-28T) or DC terminal (ECS4130-28T-
DC)
6. Grounding point
6
Package Contents
Overview
1. RJ-45 Port LEDs:
■1G Link/Activity — Green
■10/100 Mbps — Amber
2. SFP+ Port LEDs:
■10G Link/Activity — Green
■1G Link/Activity — Amber
3. System LED:
■SYS LED — Green (OK), Amber (fault)
23
1
124
37
Front LEDs
6
*150200002371A_R01*
5
Quick Start Guide
– 2 –
Mount the Switch
Ground the Switch
Connect Power
Warning:
For a safe and reliable installation, use only
the accessories and screws provided with the device. Use
of other accessories and screws could result in damage to
the unit. Any damages incurred by using unapproved
accessories are not covered by the warranty.
Avertissement:
Pour une installation sûre et fiable,
utilisez uniquement les accessoires et les vis fournies avec
l’appareil. L’utilisation d’autres accessoires et vis pourrait
endommager l’appareil. Les dommages causés par
l’utilisation d’accessoires non approuvés ne sont pas
couverts par la garantie.
Caution:
The device must be installed in a restricted-access
location.
Attention:
L’appareil doit être installé dans un emplacement
à accès restreint.
Note:
The drawings in this document are for illustration only
and may not match your particular model.
1
Attach the Brackets
Attach the brackets to each side of the switch using the included
screws.
Mount the Switch
Use the screws and cage/clip nuts supplied with the rack to secure the
switch in the rack.
Caution:
Use a UL/IEC/EN 60950-1 certified power supply
to connect to a DC converter.
Attention:
Utilisez une alimentation certifiée UL/IEC/EN
60950-1 pour connecter à un convertisseur CC.
2
Ground the Switch
Attach a #18 AWG stranded copper wire to the grounding terminal on
the switch, and the other end to the rack grounding point.
3
Connect AC Power
Connect the ECS4130-28T AC power socket to an AC power source.
Connect DC Power
The ECS4130-28T-DC requires an external 36 V to 60 V DC power
source connected to its DC terminal block.
Installation
Quick Start Guide
– 3 –
Make Network Connections
Make Management Connections
4
RJ-45 Ports
Connect Category 5e or better twisted-pair cables (UTP or STP is
required) to the RJ-45 ports on the switch.
SFP+ Ports
Install transceivers and then connect fiber optic cabling to the
transceiver ports. Alternatively, connect DAC/AOC cables directly to
the SFP+ ports.
5
Console Port
Connect an RJ-45 to DE-9 straight-through console cable and then
configure the serial connection: 115200 bps, 8 characters, no parity,
one stop bit, 8 data bits, and no flow control.
Hardware Specifications
Switch Interfaces
Management 1 x RJ-45 Console port
1 x USB Management port
Network 24 x 1 GbE RJ-45 ports
4 x 10 GbE SFP+ ports
Switch Chassis
Size (WxDxH) 330 x 230 x 44 mm (13 x 9.1 x 1.7 in)
Weight 2 kg (4.41 lb)
Operating
Te m p e r a t ur e
0° C to 45° C (32° F to 113° F)
Storage
Te m p e r a t ur e
-40° C to 70° C (-40° F to 158° F)
Humidity Operating: 5% to 90% (non-condensing)
Storage: 5% to 95% (non-condensing)
Power
Consumption
23 Watts maximum
ECS4130-28T
AC Input 100 to 240 VAC, 50-60 Hz, 0.9 A
ECS4130-28T-DC
DC Input 36 V to 60 V, 2 A Max
Regulatory Compliances
Emissions EN 55032:2015+A11:2020
EN 61000-3-2:2014
EN 61000-3-3:2013+A1:2019
AS/NZS CISPR32 2015 A1: 2020
ICES-003 Issue 7 Class A
FCC Part 15 subpart B Class A
Immunity EN 55024:2010+A1:2015
EN 55035:2017+A11:2020
IEC 61000-4-2/3/4/5/6/8/11
Safety UL (CSA 22.2 No 62368-1 & UL62368-1)
CB (IEC/EN60950-1 & IEC/EN 62368-1)
This manual suits for next models
1
Other Edge-Core Switch manuals
Edge-Core
Edge-Core ES3510MA User manual
Edge-Core
Edge-Core ECS4650-54T User manual
Edge-Core
Edge-Core ECS4810-12M Layer 2 Programming manual
Edge-Core
Edge-Core AS7326-56X User manual
Edge-Core
Edge-Core AS5916-54XKS User manual
Edge-Core
Edge-Core AS5610-52X User manual
Edge-Core
Edge-Core ECS4110-28P User manual
Edge-Core
Edge-Core ECS4620-28T User manual
Edge-Core
Edge-Core AS9716-32D User manual
Edge-Core
Edge-Core ES4524M-PoE User manual
Edge-Core
Edge-Core AGR420 User manual
Edge-Core
Edge-Core ECS4810-12M Layer 2 Programming manual
Edge-Core
Edge-Core ECS3510-26P User manual
Edge-Core
Edge-Core ECS4120-28F User manual
Edge-Core
Edge-Core ECS4620-28T User manual
Edge-Core
Edge-Core AS4610-54T User manual
Edge-Core
Edge-Core ECS4510-12PD Programming manual
Edge-Core
Edge-Core AS7535-28XB User manual
Edge-Core
Edge-Core ECS4660-28F Programming manual
Edge-Core
Edge-Core SMCGS26C-Smart User manual
