Edelbrock 70028 User manual

Catalog #70028

Rev. 11/05- DC/mc

Bottle

3AN 1/8”NPT Fitting Performer Solenoid

Tee Fitting

Polyline

Nitrous Pressure Regulator

Blue B-Nut

Jet Nozzle

Female Spade Conn.

Pushbutton

9 Volt Battery Harness

Male Spade Conn.

Compression

Fitting

Hose Barb

Vacuum Line

Nitrous Vacuum

Tee To Intake

Manifold

To Fuel Regulator

Jet Map

These HPgains are approximate.

Jet Size Approx. Gain

.020 15 HP

.024 20 HP

.028 25 HP

.030 30 HP

Edelbrock Nitrous Systems

Concealed Nitrous Kit for EFI Application

Catalog #70028

INSTALLATION INSTRUCTION

Please study these instructions carefully before installing your new Concealed Nitrous Kit. If you have any questions,

please contact our Technical Hotline at: (800) 416-8628 from 7 am - 5 pm, Monday through Friday, Pacific Standard Time or

e-mail us at [email protected].Please fill out and mail your warranty card.

DESCRIPTION: The concealed nitrous kit is a kit designed to be concealed in the vehicles as well as quickly and easily installed and

removed. This kit provides a minimal nitrous gain, but enough to get those extra hundredths of a second off of your elapsed time.

INSTALLATION INSTRUCTIONS

ATTENTION: Two 9-volt batteries are required for this kit (not included).

WARNING: ONLY USE LIQUID TEFLON PIPE SEALANT ON THREADS. USE OF TEFLON TAPE CAN CAUSE DAMAGE TO YOUR

SYSTEM AS WELL AS THE ENGINE DUE TO TAPE DEBRIS COMING LOOSE AND FLOWING THROUGH YOUR SYSTEM.

1. Connect the solenoid assembly to the bottle valve outlet fitting. Do not use any thread sealant.

2. Place one end of the polyline into the compresssion fitting coming off of the Performer solenoid tee and tighten the

compression fitting securely. The polyline should not be able to be pulled out of the compression fitting if this is done right.

Install the other end through the B-Nut, through the cone ferrule, and into the selected jet. Tighten securely so the cone

ferrule pinches around the edges of the polyline and cannot be pulled out. Do not use any sealant on the compression

fitting.

3. Install the vacuum lines and hose clamps from the nitrous pressure regulator to the nitrous vacuum tee as shown in the

diagram pictured below. Make sure the jet in the vacuum tee is a .080” jet. Be sure the tee end with the jet is attached to

the hose leading to the fuel pressure regulator.

4. Intersect the nitrous vacuum tee in the vacuum line leading to the fuel pressure regulator.

5. Connect the wiring as shown in the diagram below.

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: 1-800-416-8628

Office: 310-781-2222

E-Mail: [email protected]

Cone Ferrule

3ANFemale

to 1/8”NPT

Table of contents

Other Edelbrock Automobile Part manuals

Edelbrock

Edelbrock 1478 User manual

Edelbrock

Edelbrock Ford Mustang 63-5221 User manual

Edelbrock

Edelbrock Chevrolet 1500-6500 User manual

Edelbrock

Edelbrock 5652 User manual

Edelbrock

Edelbrock 5700 Series User manual

Edelbrock

Edelbrock 5275 User manual

Edelbrock

Edelbrock Chevrolet/GMC Trucks 454 SS User manual

Edelbrock

Edelbrock 68792 User manual

Edelbrock

Edelbrock 3867 User manual

Edelbrock

Edelbrock 5790 User manual

Edelbrock

Edelbrock 6571 User manual

Edelbrock

Edelbrock 5644 (Aluminized) User manual

Edelbrock

Edelbrock 1795 User manual

Edelbrock

Edelbrock 1997 User manual

Edelbrock

Edelbrock 7111 User manual

Edelbrock

Edelbrock 97383 User manual

Edelbrock

Edelbrock 66062 User manual

Edelbrock

Edelbrock Performer RPM Series User manual

Edelbrock

Edelbrock 3722 User manual

Edelbrock

Edelbrock 2917 Nstallation User manual

Edelbrock

Edelbrock 5721 User manual

Edelbrock

Edelbrock 67312 User manual

Edelbrock

Edelbrock Victor Jr. 70067 User manual

Edelbrock

Edelbrock Performer Series 8059 User manual

Popular Automobile Part manuals by other brands

Dakota Digital

Dakota Digital 650277 Installation

bosal

bosal 037031 Fitting instructions

Vintage Air

Vintage Air 571063 manual

GFB

GFB EX38 instruction manual

bosal

bosal 028091 Fitting instructions

Dodge

Dodge 8W-43 Wiring diagram

ICI

ICI Magnum FBM10DGN Installation

Volant Perfomance

Volant Perfomance 19435 installation instructions

BENDIX

BENDIX GEN 4 GEN 5 ABS manual

Vintage Air

Vintage Air 571065 manual

Rugged Ridge

Rugged Ridge 11503.13 installation instructions

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER instructions

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... maintenance

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G operating manual

Toshiba

Toshiba 48-1250 A instruction manual

aldes

aldes EHT2 installation instructions

Go Rhino

Go Rhino 24371T installation instructions

BBK

BBK 18950 installation instructions