Edelbrock 28385 User manual

Brochure #63-28385Page 1

Catalog #28385

Rev. 7/08 - AJ/mc

EFI Victor Jr. 4.6L Intake Manifold

For 4.6L SOHC Ford V8

Catalog #28385

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and

procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,

it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at:

1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation

will void your warranty and may result in poor performance and engine or vehicle damage.

DESCRIPTION: This intake manifold is designed to allow the use of aftermarket EFI on a Ford 4.6L Modular Single Overhead Cam engine. This will

eliminate the use of the OEM fuel injection system and is intended for longblocks that have been installed in early model or custom vehicles. A fuel

rail kit for this manifold is sold seperately as part #3639.

INSTALLATION PROCEDURE

KIT CONTENTS:

❑1 Victor Jr. Intake Manifold

❑1 Fitting; 3/8 NPT to 3/4” hose

❑1 Plug; 3/8 NPT

❑8 Bolt; M6 x 1.0 x 30mm hex flange head

NOTE:

This intake manifold is not designed for use in street driven vehicles equipped with the 4.6L engine. It is primarily intended to be used on race

cars that require air and fuel in excess of what the factory fuel injection system and manifold are capable of supplying. These installation instructions

do not attempt to cover the steps necessary to convert a vehicle to aftermarket fuel injection, they only cover what is needed to install this intake on

a properly prepared longblock.

MANIFOLD INSTALLATION:

1. Use only the recommended OEM intake gaskets with this manifold.

2. Fully clean the intake manifold and cylinder head flanges. No

sealants or adhesives are necessary.

3. Install the manifold on the block. Lightly coat the manifold bolts with

30W motor oil then gently thread them into the heads to hold the

intake in place. Do not apply any torque to the bolts at this time.

4. Install the themostat and allow it to drop into the machined recess.

The o-ring supplied with the thermostat should then be pressed in

and compressed by the thermostat housing.

5. The manifold bolts (including the thermostat housing bolts) can now

be tightened according to the torque sequence

(See Figure 1).

Figure 1 - Torque Sequence

Torque manifold bolts to 15-20 ft/lbs.

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech-Line: 1-800-416-8628 • E-Mail: [email protected]

This manual suits for next models

Table of contents

Other Edelbrock Automobile Part manuals

Edelbrock

Edelbrock Camaro 5290 User manual

Edelbrock

Edelbrock 2801 User manual

Edelbrock

Edelbrock 1931 User manual

Edelbrock

Edelbrock Performer-Plus 2132 Instruction manual

Edelbrock

Edelbrock Performer RPM 7167 User manual

Edelbrock

Edelbrock 2103 Instruction manual

Edelbrock

Edelbrock 5747 User manual

Edelbrock

Edelbrock 5716 User manual

Edelbrock

Edelbrock 5782 User manual

Edelbrock

Edelbrock 3844 (65mm) User manual

Edelbrock

Edelbrock Victor Jr. 70067 User manual

Edelbrock

Edelbrock PERFORMER-PLUS 2182 User manual

Edelbrock

Edelbrock 4771 User manual

Edelbrock

Edelbrock 65912 (Ceramic-Coated) User manual

Edelbrock

Edelbrock 1465 User manual

Edelbrock

Edelbrock Performer-Plus 2157 User manual

Edelbrock

Edelbrock 15022 User manual

Edelbrock

Edelbrock 5674 User manual

Edelbrock

Edelbrock 5262 User manual

Edelbrock

Edelbrock 1565 User manual

Edelbrock

Edelbrock 4789 User manual

Edelbrock

Edelbrock PRO-FLO XT 3527 User manual

Edelbrock

Edelbrock 5711 User manual

Edelbrock

Edelbrock 67362 User manual

Popular Automobile Part manuals by other brands

Dakota Digital

Dakota Digital 650277 Installation

bosal

bosal 037031 Fitting instructions

Vintage Air

Vintage Air 571063 manual

GFB

GFB EX38 instruction manual

bosal

bosal 028091 Fitting instructions

Dodge

Dodge 8W-43 Wiring diagram

ICI

ICI Magnum FBM10DGN Installation

Volant Perfomance

Volant Perfomance 19435 installation instructions

BENDIX

BENDIX GEN 4 GEN 5 ABS manual

Vintage Air

Vintage Air 571065 manual

Rugged Ridge

Rugged Ridge 11503.13 installation instructions

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER instructions

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... maintenance

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G operating manual

Toshiba

Toshiba 48-1250 A instruction manual

aldes

aldes EHT2 installation instructions

Go Rhino

Go Rhino 24371T installation instructions

BBK

BBK 18950 installation instructions