Ebyte E18-TBL-01 User manual

Other Ebyte Wireless Module manuals

Popular Wireless Module manuals by other brands

Laird

Laird RM024 user manual

Laird

Laird BT830-SA Hardware integration guide

Fibocom

Fibocom FM101-NA-20 Hardware guide

Waldmann

Waldmann EnOcean TALK MODUL G2 operating manual

Smartech

Smartech LBT-1.DO4 user manual

Cooper Wiring Devices

Cooper Wiring Devices ESPIRE RF RFAPM installation instructions

Yuga

Yuga CLM920 user manual

Waldmann

Waldmann TALK Bluetooth operating manual

Telit Wireless Solutions

Telit Wireless Solutions UC864-G Hardware user's guide

Quectel

Quectel SC690A Series Hardware design

Panasonic

Panasonic INDUSTRY PAN9028 Integration guide

LongSung Technology

LongSung Technology U9507E user manual

Wistron NeWeb

Wistron NeWeb DNUR-S2 user manual

RF-Star

RF-Star SimpleLink RF-BM-2652P1 CC2652P manual

CHIEF

CHIEF AVMW installation instructions

Huawei

Huawei EM701 manual

SIYI

SIYI FTM30 user manual

RF-Star

RF-Star RF-BM-4055B1L Hardware data sheet

Chengdu Ebyte Electronic Technology Co.,Ltd. E18-TBHL-01 User Manual

Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd. 1

E18-TBL-01 User manual 1.0

1、Brief introduction

1. Used to test and develop E18 zigbee modules (E18-MS1-PCB, E18-MS1-IPX, E18-MS1PA1-PCB,

E18-MS1PA1-IPX).

2. All IO ports of E18 series have been led out.

3. Designed with CH340G UART chip, UART communication development is available.

4. Designed with USB interface, can connect with your PC directly.

5. User can connect the external power supply and UART directly for secondary development.

Chengdu Ebyte Electronic Technology Co.,Ltd. E18-TBHL-01 User Manual

Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd. 2

2、User guide

Definition：

①

UART TXD selection port (P1.4)

②

UART RXD selection port (P1.5)

③

External 5V power supply port

④

External 3.3V power supply port

⑤

Module running indicator

⑥

Networking indicator

⑦

Power indicator

⑧

RLED selection port (P1.3)

⑨

NLED selection port (P1.2)

⑩

Mode selection port (P1.6)

⑪

SOC selection port (chip VCC)

⑫

Reset button for baud rate

⑬

Reset button

Chengdu Ebyte Electronic Technology Co.,Ltd. E18-TBHL-01 User Manual

Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd. 3

Function description：

1.Reset button is for system reset.

2. Double click baud rate rest button is for baud rate rest (default 115200bps)（P1.7）

3.TXD,RXD selection port can used to connect with external UART.

4.Mode selection port is used to switch AT command mode and HEX command mode. Plug in jumper

means HEX command mode(low level), plug out jumper means AT command mode(high level)( P1.6)

5. Port ①、②、③、④、⑧、⑨、⑩, and ⑪are used together to test the module current. Without

jumper plugged in for port ①、②、③、④、⑧、⑨、⑩ and ⑪, the galvanometer pen contacts ⑪ports

(above: left positive and right negative), can test the chip current.

3、Driver installation

Please visit our website for downloading CH3410G（Click here for download）. After the

installation is complete, the serial port number can be identified in the device.

4、Program download

Built-in 8051 MCU, for program download, pls use our CC-DeBugger, UART or other JTAG, ISP,

ICP instruments are not available.

The compiled HEX file is available for downloading directly.

5、Technical assistance

If you have any questions during the development process, pls contact us at suppo[email protected].

Chengdu Ebyte Electronic Technology Co.,Ltd. E18-TBHL-01 User Manual

Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd. 4

6、Communication test